Maestro e200 series User manual

MAESTRO WIRELESS SOLUTIONS
!
! !
!
!
Address: 9th Floor, Wing Cheong Factory Building,
121 King Lam Street, Cheung Sha Wan, Kowloon, Hong Kong
Phone: [phone]
Fax: [phone]
E-mail: [e-mail] http://support.maestro-wireless.com
!
Quick Start
Guide
v1.0
Maestro Wireless
Solutions
Cellular / WAN /
Wi-Fi Router

MAESTRO WIRELESS SOLUTIONS | OVERVIEW
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 2
!
QUICK START GUIDE
TABLE OF CONTENTS
1.!OVERVIEW 3
!
2.!PREREQUISITE 4
!
3.!CHECKING THE PACKAGE CONTENT 5
!
4.!DEFAULT CONFIGURATION 6!
4.1 WEB ADMIN PAGE 6
4.2 WI-FI ENABLED, WITH WPA/WPA2 TKIP KEY 6
4.3 CONNECTION 6
5.!UNDERSTANDING THE MAESTRO ROUTER 7!
5.1 LAN PANEL DETAILS 7
5.2 WAN PANEL DETAILS 8
5.3 FRONT PANEL DETAILS 9
6.!CONNECTING MAESTRO ROUTER 11!

MAESTRO WIRELESS SOLUTIONS | OVERVIEW
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 3
!
!
1. Overview
With high-speed cellular (3G and beyond), WAN, LAN and Wi-Fi connectivity, the Maestro’s
E200 series of router are highly versatile, reliable and rugged router designed for mission-
critical enterprise applications requiring faultless connectivity. The Maestro E200 series
includes three models.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
E205XT02
It is a High-Speed Downlink Packet Access (HSDPA)
router operating on bands 900/2100MHz
E205XT04
It is a High-Speed Downlink Packet Access (HSDPA)
router operating on bands 800/850/2100MHz
E206XT
It is a dual-mode router, supporting High Speed Packet Access (HSPA) on bands
800/850/1900/2100Mhz
and Evolution-Data Optimized (EV-DO) as well as CDMA.
!

MAESTRO WIRELESS SOLUTIONS | PREREQUISITE
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 4
!
!
!
!
!
!
!
2. Prerequisite
Before continuing with the installation of your E200 Series router, make sure you have a
computer equipped with the following:
!
Computer with an Ethernet port or Wi-Fi connectivity and Internet service
Active SIM card
Web browser such as Internet Explorer 7+ or Google Chrome, Mozilla Firefox
1.5+ or Apple Safari to access the Maestro Web Admin Console
HCP enabled in the computer. To enable the DHCP, go to Start > Control
Panel > Network and Sharing Centre > Click the existing Connection >
Network Connection Status dialog box appears > click Properties > Double
click Internet Protocol Version 4 (TCP/IPv4) > Internet Protocol Version 4
(TCP/IPv4) Properties dialog box appears > Under tab General, select
following options:
a. Obtain an IP address automatically
b. Obtain DNS server address automatically

MAESTRO WIRELESS SOLUTIONS | CHECKING THE PACKAGE CONTENT
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 5
!
!
3. Checking the Package Content
Check the Package contents. Check that the package contents are complete.
!
One Maestro Router
One AC Power connector cable – 4 pin connector for power supply and digital
input/output
One cross through Ethernet Cable
Wi-Fi Antenna
Diversity/GPS Antenna
Cellular Antenna
Quick Start Guide
Note
All the components are exclusive of the Maestro Router and
must be purchased.
!
If any component(s) from the package are missing, please contact Maestro Support at
[e-mail].
!
!
!
!
!
!
!
!
!
!

MAESTRO WIRELESS SOLUTIONS | DEFAULT CONFIGURATION
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 6
!
4. Default Configuration
Web Admin Page4.1
!
Parameters
Details
IP Address (LAN)
192.168.1.1
Username
admin
Password
admin
Note
Username and Password are case sensitive.
Wi-Fi enabled, with WPA/WPA2 TKIP key4.2
!
Parameter
Details
SSID
Maestro E200
WPA Key
W1rele$$
Note
Username and Password are case sensitive.
Connection4.3
WAN Connection – Automatic (DHCP - Automatic IP Address lookup)
Active DHCP with starting IP Address: 192.168.1.100 with pool of 100 clients.

MAESTRO WIRELESS SOLUTIONS | UNDERSTANDING THE MAESTRO ROUTER
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 7
!
!
WAN as automatic IP, with Cellular backup
Cellular default APN is “internet”
5. Understanding the Maestro Router
LAN Panel Details5.1
!
Figure – Maestro Router LAN Panel
Power Supply – 4 pin Micro-fit Molex connector (Power and input/output)
Ethernet port (LAN) – Cross Ethernet cable connects to LAN.
Reset Button – Push the reset button for 3 seconds and device will be reset to
default settings.
Note
Use a paper clip to push the reset button gently.

MAESTRO WIRELESS SOLUTIONS | UNDERSTANDING THE MAESTRO ROUTER
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 8
!
Wi-Fi Connector – RP-SMA antenna connector
WAN Panel Details5.2
Figure – Maestro Router WAN Panel
GPS / diversity SMA Antenna Connector
Ethernet port (WAN)
SIM Card holder
Eject Button
Cellular SMA Antenna Connector

MAESTRO WIRELESS SOLUTIONS | UNDERSTANDING THE MAESTRO ROUTER
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 9
!
!
Front Panel Details5.3
!
!
Figure – Front Pan
!
!
!
!
The top panel of Maestro E200 Series Routers features 6 LEDs on the front to indicate
critical system information.
!
!
!
!
!
!
!
!
!
!
!
!
!

MAESTRO WIRELESS SOLUTIONS | UNDERSTANDING THE MAESTRO ROUTER
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 10
!
!
!
!
!
!
!
!
!
Name
Colour and
State
Description
WI-FI
OFF
Wi-Fi network is inactive
Blue Flashing
Wi-Fi network connection
traffic
Blue ON
Wi-Fi network is up and
activate
Activity
OFF
Cellular data service is not
connected
Amber ON
Cellular data service is
connected
Network
OFF
SIM card is not inserted,
or
Device is not registered on
the cellular network
Amber Flashing
Device is registered on the
cellular home network
Amber ON
Device is registered on the
cellular roaming network
Signal
OFF
No signal (CSQ=0,99)
Amber ON
Weak signal (CSQ<7)
Amber Flashing
Strong signal (CSQ>7)
Power
OFF
Power off
Green ON
Power on
Alert
OFF
No alert, device is running
smoothly
Red Flashing
Software fault (crash, issues…)
Red ON
Hardware fault (high
temperature, problem with
module or SIM card)
Table – LED States and Description

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 11
!
!
6. Connecting Maestro Router
Step1. Press the end of the paper clip into the eject button next to SIM Tray. Press firmly
and push the end of paper clip straight in until the SIM tray pops out.
Note
DO NOT pull out the SIM tray without pushing the eject
button.
Step2. Pull out the SIM holder and place the SIM card in it, following the shape of the tray.
Note
Make sure it fits perfectly and the golden circuit side of the
SIM is faced upwards.
Figure – Installing SIM Card in Maestro Router
!

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 12
!
!
!
!
!
!
!
!
Step3. Carefully push the SIM tray containing the SIM card back into the Maestro Router.
Step4. Connect GSM antenna with “Cell” connector on the Maestro Router. Make sure the
antenna is tightly secured.
Step5. Connect GPS antenna with “Div/GPS” connector.
!
!
!
Figure – Connecting GSM antenna & Cell connector on Maestro Router
!
!
Note
We strongly recommend connecting the GPS antenna with
“Div/GPS” connector, if the Maestro Router package content
includes it. A dual antenna provides diversification that is
improved signal strength and thus better performance.

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 13
!
!
For certain circumstances/environments may require a
higher quality of antenna or one mounted in a different
location. In this case, Maestro has many antenna options to
choose from, please contact Maestro Support at
[e-mail].
Step6. Use standard Ethernet cable to connect the existing WAN access to WAN port of
Maestro Router.
Step7. Use standard Ethernet cable to connect “LAN” port with the LAN port of the
computer.
Figure – Connecting Ethernet cable on Maestro Router & computer

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 14
!
Step8. Connect the AC power connector into the “DC in” jack on LAN-side panel of the
Maestro Router. Plug the other side of the cord to a standard AC receptacle and turn the
power switch ON. The power LED will light when power is applied.
Figure – Connecting Ethernet cable on Maestro Router & computer
Step9. Open a Web browser on the computer, and enter the LAN IP Address
http://192.168.1.1 of Maestro Router in browser’s URL box. A dialog box appears
prompting to enter Username and Password.
!
Note
The default LAN IP Address of Maestro Router is 192.168.1.1
DHCP must be enabled on the computer to access Maestro
Router with LAN IP Address 192.168.1.1
!
!
!
!
!
!
!
!
!

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 15
!
!
!
Step10. Enter the Username admin, and the Password admin in the login window. Click
Login.
Note
We strongly recommend you to change your login password.
!
Screen – Login Page

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 16
!
Step11. Click Next on the Quick Setup Page. Configure the network parameters for LAN,
WAN, Cellular and Wi-Fi.
Alternately, go to Management Settings, import and load predefined settings file.
Click Save & Apply to set the configuration.
Screen – Quick Start Network Configuration Page
!

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
! !
!
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 17
!
!
Screen Element
Description
Local Network
IPv4-Address
Enter IPv4 Address of LAN
interface.
The default IPv4 Address is
192.168.1.1
IPv4-Netmask
Enter IPv4 Subnet Mask of LAN
interface.
The default Netmask is
255.255.255.0
IPv4-Gateway
Enter the Gateway IPv4 of the
Gateway.
WAN
Protocol
Select the WAN protocol from
the available options:
Available Options
Manual
Automatic
PPPoE
The default WAN protocol is
selected as Automatic.
Cellular
APN
Access Point Name (APN) is the
name (Web address) of an
access point for
GPRS/EDGE/UMTS data
connection. Generally, wireless
cellular network operator
provides the APN to their end
users.
Enter the APN provided by the
cellular network operator.
PIN
SIM card Personal Identification
Number (PIN) is used to lock
the card, preventing people
from making unauthorized
phone call or access cellular
data.
Enter the PIN of the SIM card.
Username
Enter the login name.
Password
Enter the password.

MAESTRO WIRELESS SOLUTIONS | CONNECTING MAESTRO ROUTER
!
! !
!
!
E200 SERIES | QUICK START GUIDE http://support.maestro-wireless.com 18
!
Wi-Fi
Enable
By default, Wi-Fi interface is
enabled every time the
Maestro Router reboots. Click
and disable the Wi-Fi interface
if you do not want to use them.
SSID
Service Set Identifier (SSID) is a
sequence of characters, which
uniquely names a wireless local
area network (WLAN).
The default SSID is Maestro
E200.
Password
The default password is
W1rele$$.
Table – Quick Start Network Configuration Page
!
!
!
!
!
!
!
!
!
!
!
Congratulations!!!
This finishes the basic configuration of Maestro Router and you are ready to use the
Router.
!
!
!
!
!
!
!