MAG Audio Fly Series User manual

Fly Series User Manual rev 1.21
1
[e-mail] Tel./Fax: [phone] www.mag-audio.com
Systems:
Fly 6
Fly 6L
Fly Sub 12
Fly Sub 12L
Fly Sub 15
Fly Sub 18
FLY SERIES
User Manual

Fly Series User Manual rev 1.21
2
[e-mail] Tel./Fax: [phone] www.mag-audio.com
Contents
Contents............................................................................................................................................................................................2
Panel A. Dimensions ....................................................................................................................................................................4
1. Safety instructions ...................................................................................................................................................................5
2. Regulatory information.........................................................................................................................................................6
3. Fly Series.......................................................................................................................................................................................7
3.1. Introduction.........................................................................................................................................................................7
3.2. Fly Series models ..............................................................................................................................................................7
4. Specifications............................................................................................................................................................................ 8
5. System operation.....................................................................................................................................................................9
5.1. Rigging...................................................................................................................................................................................9
5.1.1. Fly 6 / Fly 6L system flying via flying adapter..............................................................................................9
5.1.2. Attaching two Fly 6 / Fly 6L systems ..............................................................................................................9
5.1.3 Fly 6 / Fly 6L flying angle reference ............................................................................................................... 10
5.1.4. Attaching two Fly Sub 12 / Fly Sub 12L....................................................................................................... 10
5.1.5. Attaching Fly 6 / Fly 6L to Fly Sub 12 / Fly Sub 12L............................................................................... 10
5.1.6. Fly Sub 12 / Fly Sub 12L system flying via flying adapter.....................................................................11
5.1.7. Attaching Fly 6 or Fly 6L to FL-07 flying frame........................................................................................12
5.1.8. Attaching Fly Sub 12 / Fly Sub 12L to FL-07 flying frame...................................................................12
5.1.9. Fly system flying with FL-07 flying frame. .................................................................................................12
5.1.10. Fly 6 / Fly 6L stacked via pole mount adapter........................................................................................13
5.1.11. Fly 6 / Fly 6L 3-way ground stack..................................................................................................................13
5.2. Amplifiers ...........................................................................................................................................................................14
5.3. Powered speaker connection ...................................................................................................................................16
5.3.1. Mains connection. ..................................................................................................................................................16
5.3.2. Maximum number of Fly Series systems for power linking................................................................16
5.3.3. Signal connections. ................................................................................................................................................ 17
5.4. Configurations ................................................................................................................................................................ 18
5.4.1. Fly Series’ presets. ................................................................................................................................................. 18
5.4.2. Fly 6 / Fly 6L configurations............................................................................................................................. 18
5.4.3. Fly Sub 12, Fly Sub 12L, Fly Sub 15 and Fly Sub 18 cardioid usage. .............................................. 18
5.4.4. Fly Sub 12 and Fly Sub 12L configurations.................................................................................................19
5.4.5. Fly Sub 15 and Fly Sub 18 configurations. ..................................................................................................19
6. Standard contents................................................................................................................................................................20
7. Accessories ................................................................................................................................................................................21
8. Warranty and assistance................................................................................................................................................... 22
8.1. Product warranty........................................................................................................................................................... 22
8.2. Assistance......................................................................................................................................................................... 22

Fly Series User Manual rev 1.21
3
[e-mail] Tel./Fax: [phone] www.mag-audio.com

Fly Series User Manual rev 1.21
4
[e-mail] Tel./Fax: [phone] www.mag-audio.com
Panel A. Dimensions
496
376
396
694
496
380
860
506 266
266
578
M20
M20
1146
364
506
M20
676
Fly 6 / Fly 6L
Fly Sub 15 Fly Sub 18
Fly Sub 12 / Fly Sub 12L
694
496
380

Fly Series User Manual rev 1.21
5
[e-mail] Tel./Fax: [phone] www.mag-audio.com
1. Safety instructions
1. Read these instructions carefully.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not use near heat sources such as stoves, heat registers,
radiators or other equipment (including amplifiers) that produces
heat.
9. Do not use the unit near open fire sources.
10. Connect the unit only to the electric network with grounding.
Use only electric plugs that provide grounding.
11. Protect the power cord from being walked on, pinched, or
otherwise damaged.
12. Use only accessories specified by the manufacturer.
13. Unplug this unit during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the system has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the unit, the unit has been exposed
to rain or moisture, does not operate normally, or has been
dropped.
15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS SYSTEM UNIT TO RAIN OR
MOISTURE.
THIS UNIT CONTAINS POTENTIALLY LETHAL VOLTAGES.
TO PREVENT ELECTRIC SHOCK OR HAZARD, DO NOT
REMOVE THE AMPLIFIER MODULE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. 1
INSTALLING OF THIS UNIT MUST BE PERFORMED ONLY BY
QUALIFIED TRAINED PERSONNEL FOLLOWING APPLICABLE
SAFETY RULES. DO NOT ALLOW INSTALLATION OF THIS UNIT
IF INSTALLATION HARDWARE IS BROKEN, BENT, PARTS ARE
MISSING OR IS OTHERWISE DAMAGED.
1 - for powered speakers only
The triangle with the lightning bolt is used to alert the
user to the risk of electric shock.
The triangle with the exclamation point is used to
alert the user to important operating or maintenance
instructions.
The CE-mark indicates the compliance with the low
voltage and electromagnetic compatibility.
Symbol for earth/ground connection.
Symbol indicating that the equipment is for indoor use
only.
Symbol for conformity with Directive 2002/96/EC and
Directive 2003/108/EC of the European Parliament on
waste electrical and electronic equipment (WEEE).
WARNING:TO REDUCETHE RISK OF ELECTRIC SHOCK,
DO NOT ATTEMPT TO OPEN ANY PART OF THE
UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS APPARATUS
FROM THE AC MAINS, DISCONNECT THE POWER
SUPPLY CORD PLUG FROM THE AC RECEPTACLE.
THE MAINS PLUG OF THE POWER SUPPLY CORD
MUST REMAIN READILY ACCESSIBLE.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE, DRIPPING OR SPLASHING LIQUIDS.
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHOULD NOT BE PLACED ON THIS APPARATUS.
CONNECTIONS TO THE MAINS SHALL BE DONE ONLY
BY AN ELECTROTECHNICALLY SKILLED PERSON
ACCORDING TO THE NATIONAL REQUIREMENTS OF
THE COUNTRIES WHERE THE UNIT IS SOLD.
EXPLANATIONS OF GRAPHICAL SYMBOLS IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Fly Series User Manual rev 1.21
6
[e-mail] Tel./Fax: [phone] www.mag-audio.com
2. Regulatory information
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 ofthe FCC Rules.These limits are
designed to provide reasonable protection against
harmful interference in aresidential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interferenceto radio
or television reception, which can be determined
by turning the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
EC DECLARATION OF CONFORMITY
Manufacturer:
MAG Audio LLC
Merezhna 2
Bila Tserkva, Kyiv region
09100 Ukraine
We declare under our sole responsibility that
product models:
Fly6, Fly 6L, Fly Sub 12, Fly Sub 12L, FlySub 15,
Fly Sub 18
intended for use as:
professional speaker systems
are in conformitywith the provisions ofthe following
EC Directives, including all amendments, and with
national legislation implementing these directives:
- 2006/95/EC Low Voltage Directive
- 2004/108/EC Electromagnetic Compatibility Directive
- 2002/95/CE RoHs Directive
The following harmonized standards are applied:
EN 55103-1:2009 /A1:2012
EN 55014-1:2006 /A1:2009 /A2:2011
EN 55022:2010 /AC:2011
EN 61000-3-2:2006 /A1:2009 /A2: 2009
EN 61000-3-3:2013
EN 61000-3-11:2000
EN 61000-3-12:2011
EN 55103-2:2009 /IS:2012
EN 61000-4-2:2009
EN 61000-4-3:2006 /A1:2008 /IS1:2009 /A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2014
EN 61000-4-11:2004
EN 60065:2002 /A1:2006 /A11:2008 /A2:2010 /A12:2011
Bila Tserkva,
22 January 2019
Alexey Asanov
CEO
For compliance questions: [e-mail]

Fly Series User Manual rev 1.21
7
[e-mail] Tel./Fax: [phone] www.mag-audio.com
3. Fly Series
3.1. Introduction
Fly Series is a reliable solution for small and mid-
sized venues, concert halls, restaurants, clubs
and small discos, where size and power are top
priorities.
Fly Series comes with plenty of rigging accessories,
so it can be installed in large variety of ways: as
a ground stack, flying stack, or pole mounted
system.
Additionally, Fly Series is fully integrated with
Powersoft® amplifiers, extending its functionality
and convenience.
Fly 6 / Fly 6L is a line array module with fixed
vertical curvature (20°). Closed enclosure with four
6” mid-range transducers and two 1,75” VC HF
drivers is complete with integrated flying/stacking
system and pole mount adapter.
Fly Sub 12 / Fly Sub 12L is a convenient low
frequency supplement for Fly 6 / Fly 6L system,
capable of being flown or ground stacked.
Fly Sub 15 and Fly Sub 18 are low-end supports
for the entire system. They are packed with two
high excursion 15-inch or 18-inch cone drivers and
equipped with pole mount adapters for Fly 6 /
Fly 6L.
3.2. Fly Series models
Fly Series user manual covers usage of following
models:
Fly 6 part number 00-0003790
Fly 6L part number 00-0020979
Fly Sub 12 part number 00-00001300
Fly Sub 12L part number 00-0021377
Fly Sub 15 part number 00-0003296
Fly Sub 18 part number 00-00001302

Fly Series User Manual rev 1.21
8
[e-mail] Tel./Fax: [phone] www.mag-audio.com
4. Specifications
System Fly 6 /
Fly 6L
Fly Sub 12 /
Fly Sub 12L Fly Sub 15 Fly Sub 18
Type Powered line array
module
Powered line array
subwoofer
Powered line array
subwoofer
Powered line array
subwoofer
Frequency response
(-10dB) 100 – 19000 Hz 60 – 220 Hz 45 – 200 Hz 27 – 150 Hz
Max SPL (peak) 133,5 dB (calculated) 134,5 dB (calculated) 137 dB (calculated) 138 dB (calculated)
LF Transducer 4х6”, 1,75 VC 2x 12”, 2,5 VC 2x 15” 4 VC 2x 18” 4 VC
HF Transducer 2x 1”, 1,75 VC -- -
Nominal coverage HxV 100° x 15° -- -
Power 1050 W 1400 W 2000 W 2000 W
Amplifier
Class D Powersoft®,
fan cooling, DSP with
phase-linear FIR
Class D Powersoft®,
fan cooling, DSP
Class D Powersoft®,
fan cooling, DSP
Class D Powersoft®,
fan cooling, DSP
Max input current 4A 5A 10A 10A
Input sensitivity +4 dBV +4 dBV +4 dBV +4 dBV
Input impedance 10 kOhm (bal.) 10 kOhm (bal.) 10 kOhm (bal.) 10 kOhm (bal.)
Settings 4 switchable presets 4 switchable presets 4 switchable presets 4 switchable presets
Connectors
XLR in + XLR out,
Powercon mains in,
Powercon mains out
XLR in + XLR out,
Powercon mains in,
Powercon mains out
XLR in + XLR out,
Powercon mains in,
Powercon mains out
XLR in + XLR out,
Powercon mains in,
Powercon mains out
Dimensions (WxHxD) 496х376х396 mm 496х380х694mm 506х860х578 mm 506x1146x676 mm
Net weight 24 kg 36 kg 59 kg 79 kg
Shipping weight 27 kg 39 kg 63 kg 84 kg
Mounting Integrated flying
hardware
Integrated flying
hardware
Two M20 distance
pole adapters, Fly
array U-bracket
adapter
Two M20 distance
pole adapters, Fly ar-
ray U-bracket adapter
Enclosure materials Plywood; wear-
resistant paint
Plywood; wear-
resistant paint
Plywood; wear-
resistant paint
Plywood; wear-resist-
ant paint
Grill
Steel grill with
acoustically trans-
parent backing
Steel grill with
acoustically trans-
parent backing
Steel grill with
acoustically trans-
parent backing
Steel grill with acous-
tically transparent
backing
Color Black Black Black Black

Fly Series User Manual rev 1.21
9
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5. System operation
5.1. Rigging
Fly Series systems are equipped with integrated rigging system for versatile applications.
Rigging must be performed only by trained personnel following the established safety rules.
MAXIMUM WEIGHT RESTRICTIONS MUST BE FOLLOWED AT ALL TIMES!
MAKE SURE THE SUPPORT STRUCTURE IS CAPABLE OF HOLDING THE APPLIED WEIGHT WHILE
SUSPENDING THE SYSTEM!
5.1.1. Fly 6 / Fly 6L system flying via flying adapter
Required accessories:
FL-01 (part No. 00-0002973) - 1 pcs
FL-02 (part No. 00-00002616) - 1 pcs
VA-0010 (part No. 00-00002878) - 2 pcs
- Align FL-02 flying adapter with rests of FL-01
bracket.
- Insert two VA-0010 Quick lock pins into the
sockets to fix the assembly.
- Release two locking pins on the Fly 6 / Fly 6L
integrated hardware.
- Insert the FL-01 + FL-02 assembly to find supports
on the Fly 6 / Fly 6L hardware supports.
- Insert two locking pins to secure the connection.
MAXIMUM OF THREE Fly 6 / Fly 6L SYSTEMS
ARE ALLOWED FOR SUSPENSION WITH FL-02
ADAPTER.
Standard 5/8” shackle may be used to suspend the
entire system.
5.1.2. Attaching two Fly 6 / Fly 6L systems
- On the upper Fly 6 / Fly 6L system release quick
lock pins, pull the integrated link down, and secure
it with the quick lock pin.
- Position the lower Fly 6 / Fly 6L cabinet so its
integrated link finds support in the upper cabinet’s
hardware.

Fly Series User Manual rev 1.21
10
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.1.3 Fly 6 / Fly 6L flying angle reference
Flying socket number
1 2 3 4 5 6 7
1 cabinet + 21° + 12,5° + 2,5° - 7,5° - 16° - 24° - 29°
2 cabinets + 20,5° + 14° + 8° + 2° - 4° - 9,5° - 15°
3 cabinets + 24,5° + 19,5° + 14° + 9 ° + 4° - 0,5° - 4,5°
Fly 6 / Fly 6L with FL-01 and
FL-02
flying socket number reference
“ - “ angle “ + “ angle
Single, two or three Fly 6 / Fly 6L cabinets are able to be flown via FL-01 and FL-02 accessories. Table
above states the angle between horizontal plane and vertical axis of the top-most cabinet. Positive
angle means cabinets are “looking up“, negative angle means cabinets are “looking down“.
1 2 3 4 5 6 7
5.1.4. Attaching two Fly Sub 12 / Fly Sub 12L
- On the lower Fly Sub 12 / Fly Sub 12L system
release quick lock pins, pull the integrated link up,
and secure it with the quick lock pins.
- Position the lower Fly Sub 12 / Fly Sub 12L system
so its integrated link finds support in the upper
cabinet’s hardware.
- Secure connection with a quick lock pins.
Refer to the instruction on the system’s hardware
for more detailed walkthrough
5.1.5. Attaching Fly 6 / Fly 6L to Fly Sub 12 /
Fly Sub 12L
- On the lower Fly 6 / Fly 6L system release quick
lock pins, pull the integrated link up, and secure it
with the quick lock pins.
- Position the lower Fly 6 / Fly 6L system so its
integrated link finds support in the upper cabinet’s
hardware.
- Secure connection with a quick lock pins.
Refer to the instruction on the system’s hardware
for more detailed walkthrough

Fly Series User Manual rev 1.21
11
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.1.6. Fly Sub 12 / Fly Sub 12L system flying via fly-
ing adapter
Required accessories:
FL-01 (part No. 00-0002973) - 2 pcs
FL-04 (part No. 00-00002617) - 1 pcs
VA-0010 (part No. 00-00002878) - 4 pcs
- Release quick locking pins on the top of the
Fly Sub 12.
- Insert two FL-01 flying brackets into the supports
of the Fly Sub 12 / Fly Sub 12L hardware.
- Insert two VA-0010 quick lock pins into the
sockets to fix the assembly.
- Align the FL-04 flying adapter with sockets of the
FL-01 flying brackets.
- Insert four VA-0010 quick lock pins to secure the
connection.
MAXIMUM OF THREE Fly Sub 12 / Fly Sub 12L
SYSTEMS ARE ALLOWED FOR SUSPENSION
WITH FL-04 ADAPTER.
Standard 5/8” shackles may be used to suspend the
entire system.

Fly Series User Manual rev 1.21
12
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.1.7. Attaching Fly 6 or Fly 6L to FL-07 flying
frame
Required accessories:
FL-07 (part No. 00-0006618) - 1 pcs
- On the Fly 6 / Fly 6L system release quick lock
pins, pull the integrated link up, and secure it with
the quick lock pins.
- Position the Fly 6 / Fly 6L system so its integrated
link finds support in the FL-07 flying frame.
- Secure connection with the quick lock pins.
Refer to the instruction on the system’s hardware
for more detailed walkthrough
5.1.8. Attaching Fly Sub 12 / Fly Sub 12L to FL-07
flying frame
- On the Fly Sub 12 / Fly Sub 12L system release
quick lock pins, pull the integrated links up, and
secure it with the quick lock pins.
- Position the Fly Sub 12 / Fly Sub 12L system so
its integrated link finds support in the FL-07 flying
frame.
- Secure connection with the quick lock pins.
Refer to the instruction on the system’s hardware
for more detailed walkthrough
5.1.9. Fly system flying with FL-07 flying frame.
Standard 5/8” shackles may be used to suspend
the entire system.
Dierent Fly system configurations may be
suspended using the FL-07 flying frame.
MAXIMUM SYSTEM COUNT FOR SUSPENDING
WITH FL-07:
- 4x Fly 6 / 6L or
- 3х Fly Sub 12 / 12L and 3х Fly 6 / 6L

Fly Series User Manual rev 1.21
13
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.1.10. Fly 6 / Fly 6L stacked via pole mount
adapter
Required accessories:
FL-01 (part No. 00-0002973) - 1 pcs
FL-03 (part No. 00-00002678) - 1 pcs
SAT-3T (part No. 0209000020) - 1 pcs
VA-0010 (part No. 00-00002878) - 2 pcs
- Align FL-03 flying adapter with rests of FL-01
bracket.
- Insert two VA-0010 Quick lock pins into the
sockets to fix the assembly.
- Release two locking pins on the Fly 6 / Fly 6L
integrated hardware.
- Insert the FL-01 + FL-03 assembly to find
supports on the Fly 6 / Fly 6L hardware supports.
- Insert two locking pins to secure the connection.
- Mount securely the SAT-3T distance pole into
the M20 socket of the Fly Sub 15 or Fly Sub 18
subwoofer.
- Mount the Fly 6 / Fly 6L + FL-01 + FL-03
assembly onto the SAT-3T distance pole.
MAXIMUM OF TWO Fly 6 / Fly 6L SYSTEMS ARE
ALLOWED FOR POLE MOUNTING.
5.1.11. Fly 6 / Fly 6L 3-way ground stack
Required accessories:
FL-01 (part No. 00-0002973) - 1 pcs
VA-0010 (part No. 00-00002878) - 2 pcs
- Align FL-01 flying adapter with rests of Fly Sub
15 or Fly Sub 18 hardware.
- Insert two VA-0010 Quick lock pins into the
sockets to fix the assembly.
- Release two locking pins on the Fly 6 / Fly 6L
integrated hardware.
- Insert the Fly 6 / Fly 6L into mounted FL-01
flying adapter until it finds its supports.
- Insert two locking pins to secure the connection.
MAXIMUM OF TWO Fly 6 / Fly 6L SYSTEMS ARE
ALLOWED FOR GROUND STACKING.

Fly Series User Manual rev 1.21
14
[e-mail] Tel./Fax: [phone] www.mag-audio.com
Fly 6L and Fly Sub 12L
built-in power amplifier:
1
2
5
10
78
9
12
13 14
5.2. Amplifiers
Fly 6 and Fly Sub 12
built-in power amplifier:
1
2
3
4
5
6
9
10
11
12
13 14
LIMIT
TEMP
SIGNAL
READY
PRESET4
PRESET3
PRESET2
PRESET1
PRESET
SELECT

Fly Series User Manual rev 1.21
15
[e-mail] Tel./Fax: [phone] www.mag-audio.com
Fly Sub 15 and Fly Sub 18
built-in power amplifier:
1
2
3
4
5
9
12
6
10
11
13 14
1. VOLUME KNOB. Used for adjusting the volume of the system.
Remember to turn the volume dowm before connecting/
disconnecting INPUT or LINK connectors.
2. LIMIT LED. Is lit when limiter is operational, indicating excessive
signal through the system.
3. TEMP LED. Is lit when tempreture protection is in place,
indicating overheating.
4. SIGNAL LED. Is lit when signal is present on the INPUT
connector.
5. READY LED. Is lit when system is fully operational.
6. PRESET LEDS. Indicate the currently selected system preset.
For preset description, refer to the “4.4 System Operation -
Configurations” section of this manual, page 13.
7. PRESET SWITCHES. (Fly 6 only). Used for preset selection.
8. PRESET REFERENCE TABLE. (Fly 6 only). Shows preset
switches combinations.
9. LINK CONNECTOR. Used for linking additional compactible
system to same signal source.
10. INPUT CONNECTOR. Used for connecting the system to the
signal source (mixing console etc.)
11. PRESET SELECT BUTTON. Used for switching currently
selected system preset.
12. HEAT SINK. Large heat sink for eective heat dissipation.
13. PowerCon A CONNECTOR. Used for connecting mains
supply to the system.
14. PowerCon B CONNECTOR. Used for feeding the mains
supply to the additional system.
LIMIT
TEMP
SIGNAL
READY
PRESET4
PRESET3
PRESET2
PRESET1
PRESET
SELECT

Fly Series User Manual rev 1.21
16
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.3.1. Mains connection.
Fly Series systems are supplied with CN-0010 PowerCon-E/F CEE 7/7 mains cable (part number 00-
00005561). Use only original or supplied by manufacturer mains cables!.
Fly Series systems are equipped with PowerCon B mains power outlets for mains link to additional Fly
system. For linking several Fly 6 / Fly 6L full-range systems CN-0011 PowerCon link cable may be used.
(Part number 00-00005562, not supplied with the system).
Fly Series systems nominal mains power specifications: AC 220V, 50/60 Hz.
Nominal voltage tolerance: 100 - 250 V.
To power the system up, connect the mains cable to the system, then to the power outlet.
To completely power down the system, disconnect the mains cable from the power outlet.
5.3.2. Maximum number of Fly Series systems for power linking.
Do not exceed the number of power linked system listed below:
Fly 6 - no more than 5 pcs.
Fly 6L - no more than 5 pcs.
Fly Sub 12 - no more than 4 pcs.
Fly Sub 12L - no more than 4 pcs.
Fly Sub 15 - no more than 2 pcs.
Fly Sub 18 - no more than 2 pcs.
Fly 6/6L Fly 6/6L Fly 6/6L Fly 6/6L Fly 6/6L Fly 6/6L
Fly Sub 12 /
Fly Sub 12L
Fly Sub 12 /
Fly Sub 12L
Fly Sub 12 /
Fly Sub 12L
Fly Sub 12 /
Fly Sub 12L
Fly Sub 12 /
Fly Sub 12L
Fly Sub 15 Fly Sub 15 Fly Sub 15 Fly Sub 18 Fly Sub 18 Fly Sub 18
Fly Series power linking
Mains
Mains
Mains
Mains
5.3. Powered speaker connection

Fly Series User Manual rev 1.21
17
[e-mail] Tel./Fax: [phone] www.mag-audio.com
1
2
3
Shield (Ground)
Plus (+)
Minus (-)
Balanced XLR Plug connections Unbalanced XLR Plug connections
Fly Series systems connection
Mains power cable
CN-0010
PowerCon - Power-
Con mains link
(optional)
XLR - XLR signal link
(optional)
XLR signal
cable
1
2
3
Shield (Ground)
Plus (+)
Shield (Ground)
5.3.3. Signal connections.
Fly Series systems are equipped with XLR INPUT an XLR LINK connectors for signal connection.
Use of balanced XLR connector cables is recommended. In case when balanced XLR connections are not
available, unbalanced XLR connection is acceptable.
For linking the additional system to the same signal bus LINK connector may be used.

Fly Series User Manual rev 1.21
18
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.4.1. Fly Series’ presets.
Fly array system’s amplifiers are storing several presets for dierent applications.
Fly Series’ presets descriptions:
System Fly 6 / Fly 6L Fly Sub 12 / Fly Sub 12L Fly Sub 15 Fly Sub 18
PRESET 1 For use of single
cabinet
3-way system, normal
cabinet
3-way system, frontal
cabinet
3-way system, frontal
cabinet
PRESET 2
For two cabinets
stack
3-way system, inverted
cabinet (cardioid stack)
3-way system, invert-
ed cabinet (cardioid
stack)
3-way system, inverted
cabinet (cardioid stack)
PRESET 3 For three cabinets
stack
4-way system, normal
cabinet
4-way system, frontal
cabinet
4-way system, frontal
cabinet
PRESET 4
For four cabinets
stack
4-way system, inverted
cabinet (cardioid stack)
4-way system, invert-
ed cabinet (cardioid
stack)
4-way system, inverted
cabinet (cardioid stack)
Fly Series are versatile speakers suitable for dierent applications and task scopes.
1x Fly 6 / Fly 6L
Fly 6 /
Fly 6L
PRESET 1
2x Fly 6 / Fly 6L
Fly 6 /
Fly 6L
PRESET 2
Fly 6 /
Fly 6L
PRESET 2
3x Fly 6 / Fly 6L
Fly 6 /
Fly 6L
PRESET 3
Fly 6 /
Fly 6L
PRESET 3
Fly 6 /
Fly 6L
PRESET 3
4x Fly 6 / Fly 6L
Fly 6 /
Fly 6L
PRESET 4
Fly 6 /
Fly 6L
PRESET 4
Fly 6 /
Fly 6L
PRESET 4
Fly 6 /
Fly 6L
PRESET 4
5.4.3. Fly Sub 12, Fly Sub 12L, Fly Sub 15 and Fly Sub 18 cardioid usage.
Fly Series subwoofer systems can be united into the cardioid low frequency arrays. For this purpose, the
inverted subwoofer system must be installed backwards, and corresponding preset must be used (PRESET
2 for 3 way system, PRESET 4 for 4 way system).
Two unit and three unit cardioid subwoofer arrays. Cardioid arrays using two or three subwoofers are
available. For dierent number of subwoofers, dierent settings should be used for best results.
For two unit subwoofer array, put the frontal subwoofer’s Volume Knob in +6dB position, and put the
inverted subwoofer’s Volume Knob in 0dB position.
For three unit subwoofer array, put the Volume Knobs of all subwoofers in +6dB position.
5.4.2. Fly 6 / Fly 6L configurations.
While creating stacks with dierent number of Fly 6 / Fly 6L, all speakers must be set to the same
corresponding preset as described below:
Two unit cardioid array
volume knobs positions
Main
subwoofer
Inverted
subwoofer
Three unit cardioid array
volume knobs positions
Main
subwoofer
Inverted
subwoofer
5.4. Configurations
0
+6
-
8
0
+6
-
8
0
+6
-
8
0
+6
-
8

Fly Series User Manual rev 1.21
19
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5.4.5. Fly Sub 15 and Fly Sub 18 configurations.
Fly Sub 15 and Fly Sub 18 are main low-frequency reinforcement systems in the Fly Series. They can be
used in 3- or 4-way sets, and be assembled into cardioid arrays.
Fly Sub 15 and Fly Sub 18 preset usage reference:
3-way system
3-way
cardioid system
Fly 6 /
Fly 6L
Stack
Fly 6 /
Fly 6L
Stack
Fly 6 /
Fly 6L
Stack
Fly 6 /
Fly 6L
Stack
4-way system
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 15
or
Fly Sub 18
PRESET 3
4-way cardioid system
Fly Sub 15
or
Fly Sub 18
PRESET 3
Fly Sub 15 (inv)
or
Fly Sub 18 (inv)
PRESET 4
Fly Sub 15
or
Fly Sub 18
PRESET 3
Fly Sub 15
or
Fly Sub 18
PRESET 1
Fly Sub 15
or
Fly Sub 18
PRESET 1
Fly Sub 15 (inv)
or
Fly Sub 18 (inv)
PRESET 2
Fly Sub 15
or
Fly Sub 18
PRESET 1
3-way system
Fly Sub 12 /
Fly Sub 12L
PRESET 1
Fly Sub 12 /
Fly Sub 12L
PRESET 1
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 12 /
Fly Sub 12L
PRESET 1
Fly Sub 12
Fly Sub 12L
PRESET 3
Fly Sub 12 (inv)
Fly Sub 12L (inv)
PRESET 1
Fly Sub 12 (inv) /
Fly Sub 12L (inv)
PRESET 4
Fly Sub 12 /
Fly Sub 12L
PRESET 1
3-way cardioid system
Fly 6 / Fly 6L
Stack
Fly 6 / Fly 6L
Stack
Fly 6 / Fly 6L
Stack
Fly 6 / Fly 6L
Stack
4-way system
Fly Sub 15
or
Fly Sub 18
PRESET 3
4-way cardioid system
Fly Sub 15 or
Fly Sub 18
PRESET 3
Fly Sub 15 or
Fly Sub 18 (inv)
PRESET 4
Fly Sub 15 or
Fly Sub 18
PRESET 3
5.4.4. Fly Sub 12 and Fly Sub 12L configurations.
Fly Sub 12 and Fly Sub 12L are low frequency supplements in the Fly Series and are used primarily for
4-way systems or situations where ground stacked subwoofers are not an option.
Fly Sub 12 and Fly Sub 12L preset usage reference:
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 12 /
Fly Sub 12L
PRESET 3
Fly Sub 12 (inv) /
Fly Sub 12L (inv)
PRESET 4

Fly Series User Manual rev 1.21
20
[e-mail] Tel./Fax: [phone] www.mag-audio.com
6. Standard contents
Please check complete complement of your Fly Series system upon receiving the package.
Standard contents of Fly Series systems:
System Fly 6 Fly 6L Fly Sub 12 Fly Sub 12L
1 pcs - Fly 6 - powered
fixed array module
4 pcs - VA-0010 quick
lock pin
1 pcs - CN-0010 -
PowerCon mains cable
1 pcs - Fly Series User
Manual
1 pcs - Polyethylene
bag
1 pcs - Carton Box
1 pcs - Fly 6L -
powered fixed array
module
4 pcs - VA-0010 quick
lock pin
1 pcs - CN-0010 -
PowerCon mains cable
1 pcs - Fly Series User
Manual
1 pcs - Polyethylene
bag
1 pcs - Carton Box
1 pcs - Fly Sub 12
- powered array
subwoofer
8 pcs - VA-0010 quick
lock pin
1 pcs - CN-0010 -
PowerCon mains cable
1 pcs - Fly Series User
Manual
1 pcs - Polyethylene
bag
1 pcs - Carton Box
1 pcs - Fly Sub 12L
- powered array
subwoofer
8 pcs - VA-0010 quick
lock pin
1 pcs - CN-0010 -
PowerCon mains cable
1 pcs - Fly Series User
Manual
1 pcs - Polyethylene
bag
1 pcs - Carton Box
System Fly Sub 15 Fly Sub 18
1 pcs - Fly Sub 15 - powered array subwoofer
1 pcs - CN-0010 - PowerCon mains cable
1 pcs - Fly Series User Manual
1 pcs - Polyethylene bag
1 pcs - Carton Box
1 pcs - Fly Sub 18 - powered array subwoofer
1 pcs - CN-0010 - PowerCon mains cable
1 pcs - Fly Series User Manual
1 pcs - Polyethylene bag
1 pcs - Carton Box