Magellan 159109 User manual

10 ft x10 ft SCREEN HOUSE
159109
Please keep this instruction manual for future reference
Assembly Instructions
Customer Service: [phone]
7:00 am to 12:00 am CST (daily)
Live Chat at: www.academy.com
Email: [e-mail]
Made In Bangladesh

Table of Contents
Note: Before beginning assembly of product, make sure
all parts are present. Compare parts with package content
list and hardware contents. If any part is missing or
damaged do not attempt to assemble the unit. Contact
customer service for replacement parts.
Warnings………………………………………………………….. …… 2
Parts List…………………………………………………………………3
Assembly Instructions……………………………………… ……… 4-5
Care and Maintenance…………………………………………………6
Warranty Information...…………………………………………………7
Page 1 of 7

Page 2 of 7
Warnings
WARNING
•KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS SCREEN HOUSE FABRIC.This fabric is
not fireproof. It is made with flame resistant fabric, which meets CPAI-84 specifications. The fabric may burn
if left in continuous contact with any flame source. The application of any foreign substance to the fabric
may render the flame-resistant properties ineffective.
•Do not erect this product near an open flame.
•Never use any fuel burning, oxygen consuming devices, or any device that produces fumes
(including, but not limited to cooking stoves, lanterns, candles, hibachis, or heaters) in or around
your product. Inhalation of fumes may result in carbon monoxide poisoning, injury and/or death.
•Our recreational products are constructed to rigid specifications. They are not made, however, for
extreme weather, climates, or environments. Modification, abuse and extreme weather are some
conditions that may adversely affect the structural integrity.
•Additional precautions may be necessary during inclement or “surprise” weather conditions. Here
are some tips that may help during these times.
Use guy lines to help secure your structure during periods of heavy winds.
Storms or steady rains may collect in water pockets on the roof. This will add weight, which can
weaken the overall structure causing the uprights to collapse. Maintain a watchful eye and remove
any water accumulation that may occur.
IMPORTANT SAFETY AND TIP INFORMATION
TO MAXIMIZE THE ENJOYMENT OF YOUR PRODUCT PLEASE ASSEMBLE AND USE YOUR PRODUCT
AS SAFELY AS POSSIBLE.
THE PURPOSE OF THE SAFETY ALERT SYMBOLS TO CALL YOUR ATTENTION TO POSSIBLE
HAZARDS RELATING TO THE USE AND ASSEMBLY OF YOUR PRODUCT.
THE PURPOSE OF THE TIP SYMBOL IS TO CALL YOUR ATTENTION TO SUGGESTIONS THAT WILL
ASSIST YOU IN THE ASSEMBLY/DISASSEMBLY PROCESS AND ENHANCE YOUR CAMPING EXPERI-
ENCE. WHEN YOU SEE THESE SYMBOLS, PLEASE CLOSELY FOLLOW THE INFORMATION PROVIDED.

Parts List
A Fiberglass pole with pre-bend 2
B Screen house body 1
C Guy rope 4
D Stakes 8
Page 3 of 7

Assembly Instructions
Verify Parts
1. Refer to the parts list and verify all the
parts are included and undamaged.
Assembling the Screen House
1. On a level surface, unfold the screen
house so all the corners are visible.
2. Assemble both fiberglass poles (A).
3. Insert the fiberglass poles (A) through
pole sleeves, located on the top of the
screen house. Refer to image 1.
4. Insert the pin into the fiberglass pole
ferrule at the pin & ring, located at the
bottom of each corner of the screen
house. Refer to image 2.
Page 4 of 7
Step 1:
Step 2:
Tip: Do this at home prior to your first
use of the product.

Page 5 of 7
Assembly Instructions
1. Now the screen house is standing.
Secure it to the ground with a stake
through the ring on the corner. Refer
to image 1.
2. Attach the screen house to pole with
hook-and-loop tape. Refer to Image 2.
Step 3:
Step 4:
1. To secure the guy ropes, locate the
plastic slider
and look for the portion
of the guy
rope
opposite the knot.
Pull this
portion, forming a loop(works
slip knot). Extend the guy rope to
the desired distance from the screen
house and secure the stake into the
ground. Refer to Image 1.
like a

Page 6 of 7
Care and Maintenance
•ruoyegamadotsyawtseisaeehtfoenO.yrdderotsebtsumtcudorpruoY
prod atrohssatcudorptewagnirotS.tewsitielihwtignirotssitcu 24 hours
in warm weather is likely to cause mildew on the fabric coatings and are not
covered by the limited warranty.
•If you must close camp in the rain, open your product and set it up to allow it
to dry as soon as possible. Even when your product appears to be dry after
use, it is always best to unfold and assure it is completely dry before storing.
Try hanging it outside or even leaving loosely clumped in your house for a few
days. Turning it inside and out to assure it has dried everywhere, can help
prevent damage.
•Do not leave your screen house set up for weeks at a time. Exposure to
ultraviolet rays from the sun can damage and/or discolor the material.
•Clean the screen house, when it is set up, using a mild soap and lukewarm
gnihsaw,tnegretedesutonoD.yletelpmocyrddnaesniR.noitulosretaw
machines, or dryers because they can damage the screen house’s
protective coating and seams.
•Clean the poles with a cloth and lubricate them with a silicone spray to help
tnatropmiyllaicepsesisihT.yttirggniebmorfpeekdnanoisorroctneverp
after using the screen house around the salt water.
•Store the stakes in a separate storage bag. Do not pack the stakes inside
the screen house.
This product is not waterproof.
Your product is water repellent, however, during heavy rain some leakage may
occur. Keep objects from touching the inside, as objects may cause leakage at
the point of contact.
To prevent seam leakage (floor seams in particular), a seam sealer compound
must be applied to the seams. Use recommended water repellent compounds
on our product. Read the label on any product before using. Questions? Call
our customer Service number.
Do not spray or apply insecticide or pesticide on your product. It may damage
UV resistant and/or water repellent properties of our product. Any damage
caused by applying insecticide or pesticide on your product is not covered by
the limited warranty.
•
•
•
•

Warranty Information
Page 7 of 7
This product has been manufactured under the highest
standards of quality and workmanship. We warrant to the
original consumer purchaser that all aspects of this product will
be free of defects in material and workmanship for one year
from the date of purchase. A replacement for any defective
part will be supplied free of charge for installation by the
consumer. Defects or damage caused by the use of other than
genuine parts are not covered by this warranty. This warranty
shall be effective from the date of purchase as shown in the
purchaser receipt.
This warranty is valid for the original consumer purchaser only
and excludes industrial, commercial or business use of the
product, product damage due to shipment or failure which
results from alteration, product abuse, or product misuse,
whether performed by a contractor , service company , or
consumer. We will not be responsible for labor charges and/or
damage incurred in installation, repair or replacement nor for
incidental or consequential damage.