Magellan FSMGCT0010 User manual

Arrowhead 1 Person Tent
FSMGCT0010
Instruction Manual
Please keep this instruction manual for future reference
Customer Service: [phone]
7:00 am to 10:00 pm CST (daily)
Live Chat at: www.academy.com
Email: [email protected]
(Made in Bangladesh)

Warnings………………………………………………………………..…2
Parts List…………………………………………………………………...3
Assembly Instructions……………………………………………….....4-5
Care and Maintenance……………………………………………...……6
1
Table of Contents
Note: Before beginning assembly of product, make sure
all parts are present. Compare parts with package content
list and hardware contents. If any part is missing or
damaged do not attempt to assemble the unit. Contact
customer service for replacement parts.

Warnings
IMPORTANT SAFETY AND TIP INFORMATION
TO MAXIMIZE THE ENJOYMENT OF YOUR PRODUCT PLEASE ASSEMBLE AND USE YOUR PRODUCT
AS SAFELY AS POSSIBLE.
THE PURPOSE OF THE SAFETY ALERT SYMBOL IS TO CALL YOUR ATTENTION TO
POSSIBLE HAZARDS RELATING TO THE USE AND ASSEMBLY OF YOUR PRODUCT.
THE PURPOSE OF THE TIP SYMBOL IS TO CALL YOUR ATTENTION TO SUGGESTIONS
THAT WILL ASSIST YOU IN THE ASSEMBLY/DISASSEMBLY PROCESS AND ENHANCE YOUR
CAMPING EXPERIENCE. WHEN YOU SEE THESE SYMBOLS, PLEASE CLOSELY FOLLOW THE
INFORMATION PROVIDED.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This fabric is
not fireproof! It is made with flame resistant fabric which meets CPAI-84 specifications. The
fabric may burn if left in continuous contact with any flame source. The application of any
foreign substance to the tent fabric may render the flame resistant properties ineffective.
• Do not erect this product near an open flame.
• Never use any fuel burning, oxygen consuming devices, or any device that produces fumes
(including, but not limited to cooking stoves, lanterns, candles, hibachis, or heaters) in or
around your product. Inhalation of fumes may result in carbon monoxide poisoning, injury
or death.
• Your product is water repellent, however, during heavy rain some leakage may occur. Keep
objects from touching the inside, as objects may cause leakage at the point of contact.
• To prevent seam leakage (floor seams in particular), a seam sealer compound must be applied
to the seams. Use recommended water repellent compounds on our product. Read the label
on any product before using. Questions? Call our Customer Service number.
• Your recreational product is made from synthetic fabric that has been treated and is highly
resistant to the Sun’s Ultraviolet (UV) light. No fabric can withstand prolonged exposure to
sunlight.
• Do not spray or apply insecticide or pesticide on your product. It may damage UV resistant
or water repellent properties of this product.
• Our recreational products are constructed to rigid specifications. However, they are not made
for extreme weather, climates, or environments. Modification, abuse and extreme weather are
conditions that may adversely affect the structural integrity of the tent.
• Additional precautions may be necessary during inclement or unexpected weather conditions.
Here are some tips that may help during these times.
Use guy lines to help secure your structure during periods of heavy winds.
Storms or steady rains may cause water to collect in pockets on the roof.
This will add weight, which can weaken the overall structure, causing the tent to
collapse. Maintain a watchful eye and remove any water accumulation that may occur.
WARNING
2

Parts List
3
QtyPart Image
IMPORTANT NOTES BEFORE YOU BEGIN:
• Assemble your tent before camping to become familiar with the assembly.
• Setup is possible for one person, however two people are recommended.
• Select a clean, level area for the campsite free of debris and sharp objects, and away from a
natural watercourse.
• Use of a ground cloth is recommended to prolong the life of the tent floor and provide
additional insulation and moisture protection.
• To prevent damage to the zippers, unzip the doors and windows of the tent prior to
disassembly, allowing air to move freely.
• Seam sealing the inside stitched seams of the tent is recommended. This will improve weather
resistance. Discoloration may occur if applied to outside seams. (Seam sealer not included).
A Tent Body 1
B Fiberglass Pole Set 1
C Carry bag 1
D Pole bag 1
E Stake bag 1
F Guy rope (attached to tent body) 2
G Steel stake 11
Taffeta label

Assembly Instructions
Step 1:
1. Verify package contents
listed on Page 3 by emptying
contents of bag(s) and
confirming all parts are
undamaged.
Tip: Do this at home
prior to your first use of the
product.
2. Select a smooth, level site
to spread out your tent body
(A).
4
Step 2:
Slide the front pole (B1)
through the pole sleeve,
and put the pole end into
eyelets. (1)

Step 3:
1. Slide the ridge pole (B2) cross
the top of front pole (B1) and go
through the opening below of the
front pole sleeve located underneath
the rainfly. Place the end into
webbing pocket of the front eave.
Put the other end of the ridge pole
into eyelets of the back webbing.
2. Attach all the black G hooks to
the poles. (3)
Assembly Instructions
5
Step 4:
1. Pull the rainfly and make sure it is
at correct position. Attach the S-
hook to the ring at the back of the
tent. (4)
2. Stake the tent by inserting the
stakes (G) through the webbing
loops on base of the tent. Make sure
the base of the tent fully spread
out.(5)
3. Stake out guy lines (F) away from
the tent with lines at roughly a
45°angle to the ground. Adjust
using the plastic sliders. (6)

-Your product must be stored dry. One of the easiest ways to damage your product is storing it
while it is wet. Storing a wet tent as briefly as 24 hours in warm weather is likely to cause mildew
on the fabric coatings.
-If you must close camp in the rain, open your product and set it up to allow it to dry as soon as
possible. Allow dirt to dry on the fabric after a rainfall before lightly sweeping it off with a brush.
For tougher stains, spray the area with water and lightly wipe it off with a few strokes. Do not
use washer or dryer. DO NOT SCRUB THE FABRIC. ALWAYS MAKE SURE TENT IS COMPLETELY
DRY BEFORE REPACKING.
- Do not leave your tent set up for weeks at a time. Exposure to ultraviolet rays from the sun can
damage and/or discolor the material.
- Clean the poles with a cloth and lubricate them with a silicone spray to help prevent corrosion
and keep from becoming gritty. This is especially important after using the tent around salt water.
- Store the stakes in a separate storage bag that is included. Do not pack the stakes inside the
tent.
Care and Maintenance
6