POPCORN
Defrosting B WT Function
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
1)
2)
3)
1)
2)
3)
4)
1)
(2)
(3)
(4)
(5)
Time Defrost Function
a) Defau t mode
b) Cooking-time adjustab e mode
Note: Each press on " START/+30SEC" can increase
the cooking by 30 seconds for the icrowave and
Auto enu cooking. However, the operation will not
work under "Weight Defrost" operation.
Press " WEIGHT DEFROST ", LED will display
"dEF1"; when at the sa e ti e " ", " "
indicators will be lighted.
Press nu erical pads to input weight to be
defrosted. "Oz" indicator will be lighted.
Input the weight ranged between 4~100 Oz.
If the weight input is not within 4~100, the input
will be invalid. No "beep" will be sound and the
icrowave will not work until valid nu bers are
input .
Press " START/+30SEC. " to start defrosting and
the re ained cooking ti e will be displayed. ":",
" " and " " indicators will be flashing
and the "Oz" indicator will go out.
Press " TIME DEFROST ", LED will display
"dEF2". At the sa e ti e, " ", " " indicators
will be lighted.
Press nu ber pads to input defrosting ti e. The
effective ti e range is 00:01~99:99.
If the ti e input is not within 00:01~99:99, no
"beep" will be sound and the icrowave will not
work until valid nu bers are input.
The default icrowave power is power level 3.
If you want to change the power level, press "
POWER " once, and the LED will display "PL 3",
then press the nu ber pad of the power level
you wanted.
Press " START/+30SEC. " to start defrosting. The
re ained cooking ti e will be displayed. ":",
" " and " " indicators will be flashing.
Press " POPCORN " to select popcorn ode,
" "," " and "Oz" are light. "1.75","3.0","3.5"
appears in the display.
Press " START/+30SEC. " to start cooking, the
buzzer will ring once, "Oz" will go out, " ",
" " will flash.
When the cooking is over, the buzzer will ring 5
ti es, LED will display "0:00".
If the clock be setted(12-hour syste ), LED will
display the currently ti e.
Press " POPCORN " to select popcorn ode,
" "," " and "Oz" are light. "1.75","3.0","3.5"
appears in the display.
Press " MEMORY " , LED will display the cooking
ti e of the weight, the inute figure is flashing.
Press the nu ber keys and enter the ti e.
Press " MEMORY " to save the setting.If straight
press " START/+30 SEC. ", the oven will to cook
ith the a ended cooking ti e. " "," "
will flash.
Users can change the cooking ti e
e.g.: Users set " POPCORN " ti e for 3 inutes
and 15 seconds.
Press" POPCORN " button once or twice when
the oven is on call ( the screen will display "1.75"
for once press and "3.0" for twice), then press
"MEMORY" button, LED screen will display the
default cooking ti e of current food weight ( which
is not 0:00 ), for exa ple 1'30''. on the screen the
first nu ber 1 glints, press ne ber button to input
3; the second nu ber 3 glints, press nu ber
button to input 1; the third nu ber 0 glints, press
nu ber button to input 5.and then the first nu ber
3 glints again (It is si ilar as clock setting ).
Press "MEMORY" again to save current setting.
If press "START/+30SEC." to begin cooking
directly, the progra will save the latest setting
of cooking ti e auto atically.
To change the set cooking ti e, repeat step 1),
the screen will firstly display the saving ti e
( 3:15 for exa ple ), press nu ber button to reset
cooking ti e, and the follow step 2).
When co pleted, whenever press " POPCORN
" button, screen displays food weight 1.75 , 3.0
or 3.5, only cooking ti e follows the saved ti e
setting.
To go back to initialization, press " POPCORN "
button for ore than three seconds, the buzzer
will sound, then go back to initial setting.
9