Magic Control Technology MWS9940 User manual

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
1
M ULTI P OINT USB OVER LAN Workstation MWS9940
MWS9940 USER MANUAL

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
2
Contents
INTRODUCTION -------------------------------------------------------------3
MINIMUM SYSTEM REQUIREMENTS---------------------------------4
FEATURES---------------------------------------------------------------------5
CONNECTIONS AND MOUNTING KITS-------------------------------6
CONNECTIONS --------------------------------------------------------------6
OPTIONAL USB CONNECTIONS----------------------------------------6
VESA MOUNTS --------------------------------------------------------------7
OPERATING SYSTEMS SUPPORTED---------------------------------8
FOR OPTIMUM VIDEO DISPLAY ----------------------------------------8
REGULATORY COMPLIANCE--------------------------------------------8
PACKAGE CONTENTS -----------------------------------------------------8
SUPPORTED DISPLAY RESOLUTIONS -------------------------------9
DEVICE INSTALLATION - SOFTWARE---------------------------------10
THE STATIONS ASSIGNMENT--------------------------------------------16
QUICK SET WORKSTATIONS---------------------------------------------25
VERIFYING THE MWS9940 CONNECTION---------------------------29
ADJUSTING THE SCREEN RESOLUTION ----------------------------32
DEVICE DRIVER UN-INSTALLATION -----------------------------------35
SPECIFICATIONS -------------------------------------------------------------38
REGULATORY COMPLIANCE---------------------------------------------39
KNOW FACTORS & NOTE--------------------------------------------------39
TROUBLESHOOTING TIPS ------------------------------------------------40
DRIVER RELESE NOTED --------------------------------------------------40

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
3
INTRODUCTION
1. Two High-Speed USB Ports
2. Audio and Microphone Ports
3. AC Power Jack
4. Reset Port
5. VGA Port
6. Giga LAN Port
PACKAGE CONTENTS
•MWS9940
•VESA MOUTING KITS
•LAN CABLE
•3A/5V AC POWER ADAPTER
•DRIVER CD
•UER MANUAL
MCT’s Multipoint USB over LAN WorkStation MWS9940 leverage new Microsoft Windows
Server 2011 technology, providing Plug-and-Play USB and GIGA-LAN Solution that
transforms single computers into Multiuser Workstation, and turn it into a distance free Zero
Client device.
MWS9940 powers MultiPoint Workstation 2011 system in full features allowing one
computer to server up to 10 workstations (Figure 1) without adding 2nd system or any excess
graphic card, great for cost saving!
MWS9940 simply connect it to Gigabit Ethernet Port on the server and attach a monitor,
keyboard, and mouse to add a new workstation. The MWS9940
features two high-speed USB 2.0 ports, audio and microphone ports, a VGA port that
supports resolutions up to 1600 x 1200
The MWS9940 provides an inexpensive and reliable way to expand your Windows
MultiPoint Server 2011 for school and office running “office application"
“Home Entertainment” and “Full Screen Movie Playback” are not recommended.
© 2011 Microsoft. All rights reserved.
Microsoft, Active Directory, MultiPoint Server, Office, .NET Framework, Windows, and Windows Server are trademarks of
the Microsoft group of companies. All other trademarks are property of their respective owners.

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
4
MINIMUM SYSTEM REQUIREMENTS
•Available Gigabit Ethernet port or Gigabit Ethernet extension card.
•CPU –One of the following:
x64-based Intel Pentium, Intel quad core (i7, i5).
•Compatible processor (MultiPoint Server supports up to four core & eight core CPUs on
one server)
Note:
1)AMD Opteron / Athlon, AMD Embed chipset is not recommend due to unstable
keyboard/mouse operation which may not recognize under USB1.1 device.
2)Intel Itanium Processor is not supported.
RAM – The required RAM depends on the number of MultiPoint USB OVEN LAN
Workstation MWS9940s that are connected to the computer:
•DRAM 2GB for 4 stations
•DRAM 4GB for 6 stations
•DRAM 8GB for 10 stations
Multi-core processor support
• Support up to 4 & 8 multi-core processors; dual-core is less powered and therefore
only 2 to 3 workstation can be supported.
Minimum disk space for setup
• 32 GB

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
5
Figure 1 10-Seat Implementation of Windows MultiPoint Server2011 with using MWS9940
FEATURES
Ethernet connection the host server with distance free
Simple plug and play setup
Eliminates the need for internal video card installation
Designed for Microsoft Windows MultiPoint Server 2011
Simplified administration
Up to 10 WorkStations per Server PC
Average of 95% power reduction compared to a conventional PC
Ideal for education, call centers, computer labs and home offices as well as SMB and
government

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
6
CONNECTIONS AND MOUNTING KITS
Power jack – 5V/3A DC in
Reset Function port (Recall Firmware Default)
1 VGA Port (Resolutions up to 1600 x 1200 (1600 x 900 system recommend)
1 Gigabit Ethernet Port
Stereo Audio Output (Speaker/Headphone) and Mono audio input (Mic)
2 USB 2.0 Ports for Keyboard and Mouse / Plug-and-Play compliant
Optional usage for USB connection:
Select one USB port for Wireless Keyboard and mouse, therefore,
The second USB connector can be used for flash drive or External USB Storage
CONNECTIONS
OPTIONAL USB CONNECTIONS

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
7
Monitor
MWS9940 Unit
BACK VIEW
100x100mm VESA HOLES
ON MONITOR
VESA mounting
VESA mounting
3A
DC5V RESET
VESA MOUNTS
Follow up the picture illustration below:

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
8
OPERATING SYSTEMS SUPPORTED
For optimal multimedia performance, we recommend the following CPUs:
Dual-core processor: support up to 3 stations under low processing application.
Quad-core processor: support up to 6 stations under low processing application.
Core-i5 processor: support up to 6 stations under low processing application.
Core-i7 processor: support up to 6 or 10 stations under low processing application.
Windows MultiPoint Server 2011
FOR OPTIMUM VIDEO DISPLAY
Full screen video display is not recommended, user may try one station for full screen
video play back under 720P periodically. a higher system may required for full screen
video play back, please refer to following specification:
-i7 processor
-Intel Sandy bridge chipset
Note: Extended video display at full screen is not recommended; it often exhausts CPU and
force system with much lower performance.
REGULATORY COMPLIANCE
FCC / CE / C-tick / VCCI
Tested to comply with FCC Standards.
PACKAGE CONTENTS
• MW9940
• Mounting kits
• Ethernet Cable
•3A/5V AC Power Adapter
• CD (Driver and User’s Manual)
• Quick Install Guide

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
9
SUPPORTED DISPLAY RESOLUTIONS
NOTE
Always prepare devices as how many stations as the user plan to build up. Then classify
into the Mac addresses for different servers. In order to better organize for different locations,
the table as below is strongly recommended to use for pasting the Mac address while in the
build-up process. This is also as a reference for users so as to move or add additional
WorkStation if needed

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
10
.
Table 1

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
11
Table 2

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
12
DEVICE INSTALLATION - SOFTWARE
Installing the device driver enables Windows MutliPoint Server 2011 to recognize the
MWS300UV2. Please make sure the MWS300UV2 is unplugged from your server
before executing the setup program.
Step 1
Insert the Driver installation CD into the CD-ROM drive. The installer should start
automatically. If it does not, double click Setup.exe to start the Installation Wizard.
Step 2
Driver Installation Wizard, click Next to continue

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
13
Step 3
License Agreement; review it and check I accept the terms of the license agreement Click
Next to accept the License Agreement.

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
14
Step 4
Setup is searching for installed features... *You may notice the screen flashes during
hardware installation. It is part of the normal process. .

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
15
Step 5
Driver Installation Wizard, click Finish to continue and restart the computer.

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
16
THE STATIONS ASSIGNMENT
BUILDING WORKSTATION ON SINGLE SERVER ONLY
Step 1
The “MultiPoint Manager” page will be auto-displayed in a
minute after system boot-up and administrator log-in.
NOTE: If this page did not pop out automatically, please follow the illustrate below: 1. Start
-> 2. All Programs -> 3. MultiPoint Manager

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
17
Step 2
Click “Network Stations” as showed:
Step 2-1
When there is 3 workstation HUB is connected,
It shows 3 stations on the screen which are free / waiting for
assignment inside the “status” column indicating as “not
connected”.

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
18
Step 3
Click the block “□” to select one of the stations under the
column on the left side of the “client Name” and then click
“Assign to this server” at the right column as illustrated.
Step 3-1
If all of the stations need to be selected, simply
click “Select All” at the right column under “Device Task Item”.
After that, you will find all of the stations are selected as the
blocks “□”. Then, click “Assign to this server”.

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
19

MULTIPOINT USB OVER LAN WORKSTATION M WS9940
20
Step 4
Click “Yes” to complete the station assignment.
Repeat the same process of step3 – 4 for the any
other one of the station you desire to select for station assignment.
Step 5
The status column will show “Connected” workstation at lower
section of the screen.