Magiline iMAGI+ Premium User manual

Premium & Sérénité USER MANUAL
iMAGI+ v.201808

CONTENT
I. iMAGI Interface.....................................................................................................................................................................................5
II.Turning on the cabinet..........................................................................................................................................................................5
III. Main Menu.............................................................................................................................................................................................6
1. Ergonomics of the main menu .....................................................................................................................................................6
2. iMAGI control panel action icon .................................................................................................................................................6
3. Menu P1/3.........................................................................................................................................................................................7
4. Menu P2/3.........................................................................................................................................................................................7
5. Menu P3/3.........................................................................................................................................................................................7
IV. Filtration ...............................................................................................................................................................................................8
1. Manual mode...................................................................................................................................................................................8
2. Automatic mode.............................................................................................................................................................................8
3.Adjustable mode (can be set by user)........................................................................................................................................9
V. Heating ................................................................................................................................................................................................. 10
1. Choice of heating mode ............................................................................................................................................................. 10
a. OFF mode ................................................................................................................................................................................ 10
b. Swim mode.............................................................................................................................................................................. 10
c. Eco mode ................................................................................................................................................................................. 10
d.Auto mode............................................................................................................................................................................... 10
2. Choice of heating operation mode.......................................................................................................................................... 11
VI. Neolight Projector & Accessories 1, 2, 3, 4 ................................................................................................................................ 12
1. manual mode................................................................................................................................................................................. 12
2. Mode automatique....................................................................................................................................................................... 12
VII. MAGIsport2 (optional) .................................................................................................................................................................. 12
VII. bathing ............................................................................................................................................................................................... 13
IX. Filling................................................................................................................................................................................................... 13
X. Internet (if enabled).......................................................................................................................................................................... 14
XI. roller Shutter (optional)................................................................................................................................................................. 14
XII. Overwintering (if enabled) ........................................................................................................................................................... 15
XIII. pH sensor (iMAGI PREMIUM+)................................................................................................................................................. 16
1. pH sensor ...................................................................................................................................................................................... 16
2.Winterizing pH & ORP sensors (if installed) ......................................................................................................................... 16
3. Procedure to follow .................................................................................................................................................................... 16
XIV.Treatments (iMAGI Serenity)....................................................................................................................................................... 17
XV.The different treatments................................................................................................................................................................ 18
1. REDOX Serenity: pH and Liquid Chlorine Treatment ......................................................................................................... 18
2. SEL Serenity: pH Treatment and Electrolyser......................................................................................................................... 20
3. Serenity O² : pH and active oxygen treatment...................................................................................................................... 21
4. Serenity pro + : pH and Liquid Chlorine Treatment............................................................................................................. 23
5. Interpretation of the different treatment states................................................................................................................... 25
6.Treatment maintenance............................................................................................................................................................... 25
XVI. System.............................................................................................................................................................................................. 26
1. Date................................................................................................................................................................................................. 26
2.Time................................................................................................................................................................................................. 26
3. Screen setup menu ...................................................................................................................................................................... 27
XVII. Installer........................................................................................................................................................................................... 27
XVIII. easyMAGI remote control........................................................................................................................................................ 28
1. Features of the different keys.................................................................................................................................................... 28
2. Reminder........................................................................................................................................................................................ 29
3. Changing the batteries................................................................................................................................................................ 29
a. Identication and insertion................................................................................................................................................... 29
b. Lid removal.............................................................................................................................................................................. 29
c. Removing and replacing used batteries............................................................................................................................. 30
XIX. Changing the batteries iMAGI Radio case .............................................................................................................................. 31
XX. Problems & Solutions.................................................................................................................................................................... 32
Notes........................................................................................................................................................................................................ 33

User manual
4v.201808www.magiline.fr
Dear customer,
You have trusted Piscines MAGILINE for your iMAGI Premium+ or Sérénité+ pool and we thank you for this.
Your iMAGI pool is equipped as standard with the iMAGI box which allows you to control your pool with your
ngertips wherever you are in the world.
So that you can benet from all the advantages offered by iMAGI, we invite you to discover below the full descriptions
of each function.
WARNING
Any modication related to the congured Magiline installer values (default values) of the device can in certain
circumstances lead to risks for people. Any modication must therefore be carried out by qualied technical personnel.
The plant operator is responsible for any improper use or changes in values.

User manual
5v.201808 www.magiline.fr
I. iMAGI Interface
Your iMAGI control panel is equipped with a colour touch screen
that will allow you to interact with the various menus.
To access a setup menu, simply press the icon corresponding to
the function.
II.TURNING ON THE CABINET
To turn on your iMAGI control box, arm the differential switch and the power circuit breaker.
For perfect safety, your iMAGI control panel is equipped with a 30mA differential switch that will protect
the installation.
It is strongly recommended to check the operation of this differential switch at least once at the
beginning of each season.
Simply press the T» test button. The differential switch should then open and turn off the power to your
cabinet.»
Touch screen
display
Filtration pump manual
on button
(in case of electronics
malfunction)
Auxiliary pump circuit
breaker (option)
NCC pump circuit breaker (option)
Filtration
pump circuit
breaker
Power circuit
breaker
Differential
switch
Differential switch
test button

User manual
6v.201808www.magiline.fr
III. MAIN MENU
1. ERGONOMICS OF THE MAIN MENU
The iMAGI main menu consists of 3 pages described below.
2. iMAGI control panel action icon
In all the menus of your iMAGI control panel, you will nd the following 3 keys :
Pressing this key returns you to the home page.
Pressing this key allows you to cancel changes that have not yet been validated and return to the
previous menu.
Pressing this key allows you to validate changes made in a menu and takes you back to the top level
menu.
Icons and settings
Water temperature
Air temperature
Back to home page
Change of page
Conrmation key
Alarm
When there is one or more errors
concerning iMAGI, it will result in the
appearance of a red triangle.
Pressing this key allows you to know the
nature of the error.
Touch the grey area under the
alarm to reset it.

User manual
7v.201808 www.magiline.fr
1. ERGONOMICS OF THE MAIN MENU
2. iMAGI control panel action icon
3. MENU P1/3
4. MENU P2/3
5. MENU P3/3
Filtration
(see p8)
Spotlight
(see p12)
Heating
(see p10)
MAGIsport2
(see p12)
Accessory 1
(see p12)
Bathing
(see p13)
Filling up
(see p13)
Roller Shutter
(see p14)
Internet
(see p14)
Accessory2
(see p12)
System
(see p26)
Installer
(acces with code)
(see p27)
Accessory 3 and Accessory 4
(not available when a treatment system is declared in your iMAGI control
panel but the WaterTreatment» icon appears)
(see p17)
Wintering
(see p15)

User manual
8v.201808www.magiline.fr
IV. FILTRATION
1. MANUAL MODE
The ltration menu allows you to congure your FX Line ltration operations
To activate this menu, press the MANUAL key.
This menu allows you to turn your ltration on or off.
- The ON key is used to switch the ltration on.
- The OFF button turns off the ltration.
2. AUTOMATIC MODE
To activate this menu, press the AUTO key.
The automatic mode offers the choice between two factory-set
modes (MODE 1 AND MODE 2) and a congurable mode
(adjustable mode).
Automatic modes set at the factory (cannot be modied)
When you are in automatic mode, press the MODE 1 OR MODE 2 button to select a factory-set mode that cannot
be changed, the two modes are identical in ltration time but at different times.
As the ltration needs differ according to the water temperature, automatic modes 1 and 2 have 2 different settings
depending on whether the water temperature is above or below 24°C. Press the info key to nd out the conguration
of the activated mode.
Mode 1 setting Mode 2 setting
Water temperature below 24 °C Water temperature below 24 °C
First filtration cycle
Start time: 9H00
End: 12H00
3h
Second filtration cycle
Start time: 14h30
End: 17h30
3h
First filtration cycle
Start time: 10H00
End: 13h30
3h30
Second filtration cycle
Start time: 14h30
End: 17H00
2h30
Total : 6h Total : 6h
Water temperature above 24 °C Water temperature above 24 °C
First ltration cycle
Start time: 9H00
End: 12H00
3h
Second ltration cycle
Start time: 14h30
End: 18h30
4h
First ltration cycle
Start time: 10H00
End: 13h00
3h
Second ltration cycle
Start time: 14h30
End: 18h30
5h
Total : 7h Total : 8h
In manual mode the ltration remains
activated until the OFF key is pressed.
MODE 1
INFO
MODE 2
REGLABLE
ON OFF

User manual
9v.201808 www.magiline.fr
1. MANUAL MODE
2. AUTOMATIC MODE
3. ADJUSTABLE MODE (can be set by user)
When you are in automatic mode, press the SET button to select this mode and by pressing INFO you can access the
settings.
The adjustable mode also has the possibility of having 2 different settings according to the water temperature to adapt
to the ltration needs of your pool. In this mode, the water temperature can be set by the user.
STEP 1
Set the set temperature to switch between the 2 time
calendars by pressing the’’+’’ or’’-’’ keys.
STEP 2
Select the time schedule according to the set temperature by
pressing the upper button.
Set the time slots according to the water temperature
STEP 3
Adjust the lter periods by pressing and selecting the
hours and minutes of each period start and end.
It is preferable that both time periods be set to the
same start time for the morning.
After setting the exact time, press the execute button to conrm your choice or press the cancel button to
cancel and return to the previous menu.
ON OFF

User manual
10 v.201808www.magiline.fr
V. HEATING
This menu allows you to dene the water temperature of your pool so that it is managed by your iMAGI control panel.
This box allows you to choose between several conguration modes. To do this, press the button next to «Heating
operation» several times:
If you have chosen the OFF mode: you do not heat your pool. Use when winter mode is active.
b. SWIM MODE
If you have chosen swimming mode, you must set the desired water temperature:
Bathing temperature: + 26,0°C -
- Press the + button to increase the bathing temperature
- Press the - button to lower the bathing temperature
c. ECO MODE
If you have chosen eco mode, you dene a temperature lower than the swimming temperature when you are not using
your pool.This mode allows you to save money by limiting heating energy consumption.
NB: If your box is connected to the internet, this mode is not useful.
If you have chosen auto mode, your heating system will automatically switch to eco mode during pre-programmed
periods.To program schedules, press the key to select the period or periods you can modify.
a. OFF MODE
1. CHOICE OF HEATING MODE
d. AUTO MODE
Heater Operation: OFF
Heater Operation: BATHING
Heater Operation: ECO
Heater Operation: AUTO

User manual
11v.201808 www.magiline.fr
b. SWIM MODE
c. ECO MODE
• Select the period you want to set
• Select the start date of the period by pressing the key
From: Days Month and conrm with the conrm key
• Select the end date of the period by pressing the key
To : Days Month and conrm by pressing the conrm key
• Then select whether the period active or inactive
• Then press the conrm button to conrm your settings and return to the previous menu, which will allow you
to choose the set temperatures for the auto mode in addition to the swimming mode.
2. CHOICE OF HEATING OPERATION MODE
There are two alternatives to heating operation depending on the choice of heating mode:
• Filtration mode
The heating priority is not active and the heating only works during lter hours.
• Adjustable mode :
This mode makes heating priority active and allows the user to set the heating operating times.
If the times set in this mode are greater than those set in the lter menu, this mode will keep the lter pump and heating
in operation until the water temperature set point is reached and stop everything at the end time set in the adjustable
heating menu.
The default value is January 1 to February 28
It is possible that this mode will trigger the ltration pump 4 minutes every hour to control the
pond temperature and will stop at set times beyond the ltration hours.
a. OFF MODE
1. CHOICE OF HEATING MODE
d. AUTO MODE
Heater schedule: FILTRATION
Heater schedule: ADJUSTABLE

User manual
12 v.201808www.magiline.fr
VI. NEOLIGHT PROJECTOR & ACCESSORIES 1, 2, 3, 4
The projector menu allows you to manage the operation of your pool’s projector(s) over two periods and to hide certain
days of the week. The accessory menus are identical and allow you to congure the operation of your accessories. 230V
consuming up to 4 amperes maximum.
If a treatment is used, the 3&4 accessories will not be present
1. MANUAL MODE
This menu allows you to turn your projector(s) (or
accessories) on or off outside the automatic mode.
To activate this menu, press the MANUAL key :
• The ON key turns on your projector(s) (or accessories)
• The OFF button turns off your projector(s) (or
accessories)
In manual mode your projector(s) remains on until the OFF button is pressed.
2. MODE AUTOMATIQUE
Automatic mode allows you to automatically manage the
status of your projector(s) (or accessories).
To activate this menu, press the AUTO key
To change the automatic operating settings of your
projector(s), press the SETTINGS button and change the
various settings as desired.
After making changes in this menu press the conrm key to conrm your choice or the cancel key to cancel
and return to the previous menu.
VII. MAGIsport2 (optional)
This menu allows you to turn your MAGIsport2 Counter-Current Swim on or off.
After pressing the ON key, your MAGIsport2 Counter-Current Swim will remain in operation
until the 20-minute delay expires or the OFF key is pressed.
ON OFF
ON

User manual
13v.201808 www.magiline.fr
1. MANUAL MODE
2. MODE AUTOMATIQUE
VII. BATHING
To enable you to maintain perfect water quality, even when your pool is heavily used,Piscines MAGILINE has integrated
a timed swimming mode into your iMAGI control panel.
Swim mode allows you to easily activate your ltration and automatic treatment (if installed) during a 2H period
when ltration is paused to treat and lter your water when bathers enjoy your pool.
The ON key activates the swimming mode for 2H
The OFF button is used to deactivate the swimming mode.
If you shorten the Swim mode with the OFF key the ltration and your automatic treatment (if
installed) will stop and resume their normal operating cycle.
IX. FILLING
This menu allows you to activate or deactivate your pool
lling system.
The lling system of your pool has a congurable security.
Your iMAGI control panel will automatically stop lling
your pool if its operating time is longer than the safety time
(maximum 4H).
After making changes in this menu, press the execute key
to conrm your choice or the cancel key to cancel and
return to the previous menu.
The lling will only ll the pond with water during periods when ltration is stopped
Safety Time: 2 H 00

User manual
14 v.201808www.magiline.fr
X. INTERNET (if enabled)
This menu allows you to know the connectivity settings of your iMAGI control panel so that your Piscines MAGILINE
installer can create your customer space on www.imagi.fr.
When the connection is active and working, the two small screens at the bottom right ash
alternately green and red, and a countdown is made from 0 to 5.
If a red cross is present between the two
screens, the internet connection does not work.
XI. ROLLER SHUTTER (optional)
This menu allows you to check the status of your Magiguard security ap. The opening or closing state of your shutter
also allows the iMAGI system to control the production of your chlorinator if it has a LOW mode that reduces chlorine
production by 50%.This system prevents any degradation of your pool due to overchlorination when the shutter is
closed.
The pool safety standard NF P90-308 requires to be physically present throughout the operation
of the device and to check the absence of swimmer or foreign body in the pool before and during
the operation.

User manual
15v.201808 www.magiline.fr
XII. Overwintering (if enabled)
The Overwintering icon is only visible if enabled by your installer.
The water temperature alarm is only an alarm and has no effect on the pump.
By default, if the air temperature drops below the 0° set point, the pump will run for 15 minutes every hour.
If the air temperature drops below -10°, the pump will run for 30 minutes every hour.
Changing Default Settings
You can change the values by pressing the SETTINGS button.
Alarm if T°C Water < : + 5.0°C -
- Pressing the + key increases the setpoint.
- Press the - key to decrease the setpoint
Switching on the lter pump :Temperatures and times can be set by the user
The minimum ltration time is limited to 10 minutes at 0°C.
The minimum ltration time is limited to 20 minutes at -10°C.
If wintering is active, remember to set the heating function to OFF in the heating menu.

User manual
16 v.201808www.magiline.fr
XIII. pH sensor (iMAGI PREMIUM+)
Setting a read-only pH probe is available on page 3 of the touch panel
This probe does not automatically treat the pH of your pool.
1. PH SENSOR
This menu allows you to calibrate the pH probe (pH reading)
To perform this calibration you need:
- Of distilled water
- The current pH7 and pH4 solution (date at the bottom left of the bottle label)
To calibrate your probe, press the PROBE CALIBRATION key and follow the on-screen instructions.
2.Winterizing pH & ORP sensors (if installed)
In the case of an active wintering of your pool, you can leave your probes installed on the hydraulic loop located in
your technical room, protected from frost.
In the case of passive wintering, you must remove your probes from the hydraulic loop, after having completely
drained your pipes.Your probes must be prepared for wintering.
3. PROCEDURE TO FOLLOW
When you winterize your pool, you must clean the probe :
• Soak the probe for 1 hour in 10% hydrochloric acid (Commercial) descaling effect
• Rinse the probe well with clean water, it is important
• Soak the probe in 2.6% (commercial) bleach for 1 hour to remove organic matter.
• Rinse the probe well with clean water
• Store it in its case, with saturated potassium chloride (KCL).
A few ml is enough (Pharmacy) Regenerates your probe

User manual
17v.201808 www.magiline.fr
1. PH SENSOR
2.Winterizing pH & ORP sensors (if installed)
3. PROCEDURE TO FOLLOW
XIV.TREATMENTS (IMAGI SERENITY)
iMAGI Serenity is an automated processing system that must be installed and adjusted by your distributor.
The only settings that can be adjusted by you on the advice of your distributor are the pH and Chlorine treatment
instructions, accessible via the treatment icon on page 2.
• The pH set point adjustment on the left must be adjusted with the + or - keys.
• The setting of the chlorine set point in ppm on the right must be adjusted with the + or - keys.
Commissioning of treatments
To turn on the treatments (pH and Chlorine) you must press the adjustment button for each treatment and
press OFF to activate the treatment.
If the key is ON in green the treatment is active.
Each canister is equipped with a level rod that
must be set approximately 10 cm above the
bottom of the canister to warn the user of
the low level of reactive product. (See table on
page 25)
Information: Lack of water treatment
If you see this information it is because there is a lack of water
ow in the analysis chamber.
Possible causes are:
• Switching off the lter pump
• Incorrect adjustment of the oat in the analysis chamber
• The wrong by-pass setting
• Clogged cartridge
• Suction strainer clogged

User manual
18 v.201808www.magiline.fr
XV.THE DIFFERENT TREATMENTS
The list of treatments is as follows:
• SÉRÉNITÉ REDOX
• SÉRÉNITÉ SEL
• SÉRÉNITÉ O2
• SÉRÉNITÉ PRO +
• PREMIUM +
Analysis chamber
Redox Probe
Treatment box
pH sensor
1. REDOX SERENITY: PH AND LIQUID CHLORINE TREATMENT
Dosing pump
(peristaltic)
Dosing pump
(peristaltic)
New version of the analysis chamber
from 2018.

User manual
19v.201808 www.magiline.fr
• Press left to adjust The pH treatment
• Press right to adjust The Chlorine treatment
• The treatments must be in ON mode for The whole thing to work (but everything is already set atThe factory)
• To calibrate The probes go to PROBE CALIBRATION and follow The steps requested.
1. REDOX SERENITY: PH AND LIQUID CHLORINE TREATMENT
Possible settings for a REDOX Serenity treatment
• Go to page 2
• Enter WATER TREATMENT
Chlorine treatment set
point adjustment
pH treatment set point
adjustment
settings pH and Chlorine

User manual
20 v.201808www.magiline.fr
2. SEL SERENITY: PH TREATMENT AND ELECTROLYSER
The possible settings for a SEL Serenity treatment are the same as for the REDOX Serenity treatment..
Treatment box
Redox Probe
pH sensor
Electrolyser
Analysis chamber
Dosing pump
(peristaltic)