Magnavox MDR161V User manual

Owner’s Manual
Read your Owner’s Manual first for
quick tips that make using your
Magnavox product more enjoyable.
If you have read assistance,
you may access our online help at
www.magnavox.com/support
or call
1-866-341-3738
while with your product
(and Model / Serial number)
Lea primero el Manual del Propietario,
en donde encontrará consejos que
le ayudarán a disfrutar plenamente
de su producto Magnavox.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
asistencia en línea en
www.magnavox.com/support
o llame al teléfono
1-866-341-3738
y tenga a mano el producto
(y número de model / serial)
© 2015 Funai Electric Co., Ltd.
MDR161V
DVD Recorder/
VCR with Line-in Recording (NO TUNER)
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Español
Français
English
–2 –EN
Safety Instruction
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference. Serial No.:
Model No.:
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED
TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
The symbol for CLASS ll (Double Insulation)
The important note and rating are located on the rear or
bottom of the cabinet.

English
Français
Español
EN –3 –Continued on next page.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt
to service this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy
protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing
on it. A falling unit can cause serious injury or even death.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on
your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to
them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours
until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance
with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com.
Click on
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of picture problems with 525(480) progressive scan output, it is recommended that the
user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with
this 525p(480p) DVD player, please contact our customer service center.

Español
Français
English
Introduction
Safety Instruction ................................................................. 2
Supplied Accessories......................................................................6
Maintenance.........................................................................................6
Trademark Information.................................................................7
Features.................................................................................. 8
Symbols Used in This User Manual.......................................9
Functional Overview.........................................................10
Front Panel ........................................................................................10
Rear Panel..........................................................................................11
Remote Control.............................................................................12
Using the Remote Control......................................................12
Front Panel Display.......................................................................14
Connection
Connection..........................................................................15
Connecting to an External Tuner........................................15
TV Connection Overview........................................................15
Connecting to a TV with an HDMI™ Compatible
Port ...................................................................................................16
Connecting to a TV with Component Video Input
Jacks...................................................................................................16
Connecting to a TV with an S-Video Input Jack.........17
Connecting to a TV with Audio / Video Input
Jacks...................................................................................................17
Connecting to a TV without Audio / Video Input
Jacks...................................................................................................18
Digital Audio Connection.........................................................19
2 Channel Analog Audio Connection ..............................19
Basic Setup
Before You Start................................................................20
Finding the Viewing Channel on Your TV......................20
On-screen Display / Menu.......................................................21
Main Menu.........................................................................................22
Switching DVD / VCR Mode.................................................23
How to Insert a Disc / Cassette Tape..............................23
Initial Setting........................................................................24
Clock Setting.......................................................................24
Recording
Information on DVD Recording ....................................24
Before Recording...............................................................25
Auto Chapter Setting..................................................................25
Recording Audio Select (XP).................................................25
Setting Aspect Ratio for Video Mode Recording.......26
Basic Recording & One-touch Timer Recording ............. 26
Timer Recording................................................................27
Hints for Timer Recording.......................................................30
Satellite Link........................................................................31
Settings for an External Device......................................32
Connection to an External Device .....................................32
Setting the Video Input..............................................................32
Recording from an External Device...................................33
Bi-directional Dubbing......................................................33
Protecting a Disc................................................................34
Make a Disc Playable on Other DVD Players ............35
Finalizing a Disc...............................................................................35
Auto Finalizing .................................................................................35
Playback
Information on Playback...................................................36
Basic Playback .....................................................................37
Direct Playback ...............................................................................37
Playback from the Title List.....................................................37
Playing an Audio CD, Viewing JEPG files on
CD-RW/R or DVD-RW/-R................................................38
Using the Title / Disc Menu....................................................38
Pause.....................................................................................................38
Special Playback..................................................................39
Resume Playback ...........................................................................39
Fast Forward / Fast Reverse Playback...............................39
Skipping TV Commercials during Playback ....................39
Rapid Playback.................................................................................39
Step by Step Playback.................................................................40
Slow Forward / Slow Reverse Playback...........................40
Zoom....................................................................................................40
Marker Setting .................................................................................41
Repeat Playback..............................................................................41
Random Playback ..........................................................................42
Slide Show.........................................................................................42
Program Playback ..........................................................................42
Search ...................................................................................43
Time Search......................................................................................43
Selecting Audio/Video Format........................................44
Switching Subtitles.........................................................................44
Switching Audio Sound Track................................................44
Switching Camera Angles.........................................................45
Reducing Block Noise.................................................................45
–4 –EN
Contents

English
Français
Español
Editing
Information on Disc Editing ............................................46
Title List...............................................................................................46
Editing Discs......................................................................................46
Formatting a Disc ..............................................................47
Choosing the Recording Format of a Brand-new
DVD-RW ......................................................................................47
Reformatting a Disc Manually.................................................47
Creating/Deleting a Playlist..............................................48
Adding Titles to a Playlist..........................................................48
Deleting All Playlists.....................................................................48
Deleting Titles ....................................................................49
Editing Discs........................................................................49
Deleting Part of a Title...............................................................49
Putting Names on Titles............................................................50
Setting Chapter Marks................................................................51
Setting or Clearing All Chapter Marks at Once..........52
Dividing a Title................................................................................52
Combining Titles............................................................................53
Setting or Releasing the Title Protection.........................53
Function Setup
List of Settings ....................................................................54
Setups ...................................................................................56
Playback...............................................................................................56
Display..................................................................................................58
Video.....................................................................................................58
HDMI....................................................................................................59
Reset All..............................................................................................60
VCR Functions
VCR Functions....................................................................60
Playback...............................................................................................60
Recording ...........................................................................................61
One-touch Timer Recording (OTR) .................................61
Index Search.....................................................................................62
Time Search......................................................................................62
Other Operations.........................................................................63
Others
Troubleshooting.................................................................64
Language Code ...................................................................68
Glossary ...............................................................................69
Specifications.......................................................................70
Español
Español .................................................................................71
Discos Reproducibles..................................................................71
Códigos de Región.......................................................................71
Disco Grabable...............................................................................71
Disco no Grabable .......................................................................71
Conexión Básica.............................................................................72
Conexión a un Televisor con un Puerto
Compatible con HDMI™....................................................72
Modo HDMI y señales efectivas de salida......................72
Configuración Inicial .....................................................................73
Grabación Básica............................................................................73
Grabación con Temporizador ...............................................74
Reproducción...................................................................................74
Limited Warranty
Limited Warranty ..............................................Back cover
EN –5 –Continued on next page.

Español
Français
English
–6 –EN
Supplied Accessories
Remote Control (NB887UH) with Batteries (AA, 1.5V x 2)
TITLE
OPEN/
CLOSESOURCE
STANDBY-ON
RCA Audio/Video Cables
Owner’s Manual
ŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
ŴŴŴ
ŴŴŴŴŴ
ŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴŴ
Quick Start Guide
Maintenance
Servicing
• Please refer to relevant topics on “Troubleshooting”
(p.64-67) before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn the unit to the standby mode, unplug the
power plug and please call our help line mentioned on the
front page to locate an Authorized Service Center.
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit. Such
chemicals may discolor the surface or damage the unit.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to “Troubleshooting” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
Auto head cleaning
• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on the
video heads after a long period of use, or the usage of rental
or worn tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your unit
may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem, please
consult your dealer or an Authorized Service Center.
Note(s)
• Remember to read the instructions along with the video
head cleaner before use.
•
Clean video heads only when problems occur.
IR signal check
If the remote control does not work properly, you can test if
the remote control sends out the infrared signal using a digital
camera (including the built-in camera of a cellular phone). It will
help to define the cause of malfunction.
Using a digital camera (including the built-in
camera of a cellular phone):
Direct a digital camera to the remote control,
press and hold a button on the remote control. If
infrared light appears on the digital camera screen,
the remote control is working.
Note(s)
• Some cameras have an IR Filter and will not display the IR
signal.

English
Français
Español
EN –7 –Continued on next page.
Trademark Information
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Dolby Digital Stereo Creator
“Dolby®Digital Stereo Creator enables consumers to create
stereo DVD-Videos with stunning Dolby Digital sound tracks at
home. The technology, when utilized instead of PCM recording,
also saves recordable disc space, allowing for higher video
resolution or extended recording time on each DVD. DVDs
mastered using Dolby Digital Stereo Creator will play back on
all DVD-Video players.”
Note(s)
• This is true when the players are compatible with actual
recordable DVD discs.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
is a trademark of DVD Format/Logo Licensing
Corporation.
© 2015 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or
stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore,
any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without
the obligation to notify any person or organization of such changes.
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd.
and Funai Corporation, Inc. under license from Philips Electronics North America.

Español
Français
English
–8 –EN
Features
This unit not only plays DVD, CD and VCR but also offers
features for you to record and then edit on DVD.
Recording
This unit is compatible with recording on DVD-RW which is
recordable repeatedly and DVD-R which accept the additional
recordings until the disc becomes full but not overwritable.
You can choose either one for your convenience.
Also, this unit allows you to record to the cassette tape.
Up to 12 program recording:
You can program the unit to record up to 12 programs within
a one-month period. Daily or weekly program recordings are
also available.
One-touch timer recording (OTR):
You can easily extend a recording time. Every time [REC] is
pressed during recording, the recording time will be increased
by 30 minutes up to 8 hours. The recording automatically
stops when the recording time ends or the disc is full.
Dubbing mode:
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the DVD
or a cassette tape is not copy protected. You cannot record
on a cassette tape when its erase-protection tab is removed.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title menu making:
The unit creates a title menu automatically when finalizing
discs for video mode recording.
Automatic playlist making:
The unit creates a playlist automatically after recording VR
mode DVD-RW.
Automatic title finalizing:
For video mode DVD-RW/-R recording, you can finalize discs
automatically after finishing all timer recordings or at the end
of the disc space if you set this in the main menu.
Playback
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can experience
the theater surround sound from discs with surround sound
system.
Quick search for what you would like to watch:
You can easily find the part you would like to watch using the
search function. Search for a desired point on a disc by title,
chapter or time.
Viewing JPEG files:
You can view JPEG files which are recorded on CD-RW/-R
and DVD-RW/-R.
Quick search for what you would like to watch:
You can easily find the part you would like to watch using the
index search/time search functions. An index mark will be
assigned at the beginning of each recording you make.
For time search function, you can go to a specific point on a
cassette tape by entering the exact amount of time you would
like to skip.
Editing
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Dividing or combining titles (VR mode DVD-RW only):
You can divide or combine a playlist title.
Deleting parts of titles (VR mode DVD-RW only):
You can delete a specific part of a title.
Compatibility
Available for playing discs on a regular DVD player:
Recorded discs can be played on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. For DVD-RW/-R, you need to finalize the recorded
discs to play on other DVD players.
Others
Progressive scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher resolution
than that of traditional television signals.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.

English
Français
Español
EN –9 –Continued on next page.
Symbols Used in This User Manual
To specify which disc type each function is for, we put the
following symbols at the beginning of each item to operate.
Note(s)
• DVD-RW recorded in the non compatible recording format is
not recordable.
• DVD-R recorded in VR mode is not recordable on this unit.
Symbol Description
For Recording, Playing, and Editing
Description refers to DVD-RW (VR mode)
Description refers to DVD-RW (Video mode)
Description refers to DVD-R (Video mode)
For Recording and Playing
Description refers to VHS tapes
Use only cassettes marked VHS ( )
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to CD-RW/-R and DVD-
RW/-R with JPEG files.
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.

Español
Français
English
–10 –EN
Functional Overview
Front Panel
12*3
45678*9101112131418 17 15161920212223
(*) The unit can also be turned On by pressing these buttons or inserting a cassette tape.
1. Cassette compartment (VCR)
Insert a cassette tape here.
2.
Abutton (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
Place a disc when it is open.
4. AUDIO input jacks (L2) (DVD/VCR)
Use to connect an external device with an RCA
audio cable.
5. VIDEO input jack (L2) (DVD/VCR)
Use to connect an external device with an RCA
video cable.
6. S-VIDEO input jack (L2) (DVD/VCR)
Use to connect the S-video output of an external
device with an S-video cable.
7.
IREC button (DVD)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
8.
Bbutton (DVD)*
Press to start or resume playback.
9.
Cbutton (DVD)
• Press to stop playback or recording.
• Press to stop the proceeding timer recording for
DVD.
10. DVD indicator
Lights up when the DVD output mode is selected.
11. SOURCE button (DVD/VCR)
Press to select the component you would like to
operate.
12. VCR indicator
Lights up when the VCR output mode is selected.
13. D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR)
duplication which you set in the main menu.
14. TRACKING
L/ Kbuttons (VCR)
• Press to adjust the tracking during cassette tape
playback or slow motion.
• While playback is in still mode, you can adjust the
picture to remove vertical blur.
15. Display (DVD/VCR)
Refer to “Front Panel Display” (p.14).
16. Infrared sensor window (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
17.
I REC button (VCR)
Press once to start a recording. Press repeatedly to
start the one-touch timer recording.
18.
B button (VCR)
Press to start playback.
19.
C A button (VCR)
• Press to remove the cassette tape from the
cassette compartment.
• Press to stop cassette tape playback or recording.
• Press to stop the proceeding timer recording for
VCR.
20.
Dbutton (VCR)
Press to rapidly advance the cassette tape or view
the picture rapidly during playback (forward search).
21.
Ebutton (VCR)
Press to rewind the cassette tape or to view the
picture rapidly in reverse during playback (rewind
search).
22.
ybutton (DVD/VCR)
Press to turn On the unit or to switch the unit to
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
23. POWER-ON indicator (DVD/VCR)
Red LED lights up when power is On.

English
Français
Español
EN –11 –Continued on next page.
Rear Panel
12
37910 8 6 453
1. AC Power Cord
• Connect to a standard AC outlet to supply power
to this unit.
• Unplug this cord from the AC outlet to
completely shut down the unit.
2. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
3. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
4. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
5. VIDEO IN jack (L1)
Use to connect an external device with an RCA
video cable.
6. AUDIO IN jacks (L1)
Use to connect an external device with an RCA
audio cable.
7. S-VIDEO IN jack (L1)
Use to connect the S-video output of an external
device with an S-video cable.
8. COMPONENT VIDEO OUT jacks
Use to connect the component video inputs of a TV
monitor with a component video cable.
9. S-VIDEO OUT jack
Use to connect the S-video input of a TV monitor,
AV receiver or other device with an S-video cable.
10. COAXIAL DIGITAL AUDIO OUT jack
Use to connect the digital audio coaxial input of an
AV receiver, Dolby Digital decoder, or other device
with a digital audio coaxial cable.
Note(s)
• Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to
the unit.
• This unit does not have an RF modulator.
Caution when using S-video, component, or HDMI
connection for VCR:
• Only video/audio playback is available with these
connections.

Español
Français
English
–12 –EN
Remote Control
Installing the Batteries in the Remote Control
Install the batteries (AA 1.5V × 2) matching the polarity
indicated inside the battery compartment of the remote
control.
123
Note(s)
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Lithium or ni-cad and ni-mh rechargeable batteries are not
recommended for use in the remote control.
• Do not mix different types of batteries such as alkaline and
standard (carbon-zinc).
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together. Although they
may look similar, different batteries may have different voltages.
• Make sure that the + and - ends of each battery match the
indications in the battery compartment.
• Remove batteries from the battery compartment that are not
going to be used for a month or more.
• When disposing of used batteries, please comply with
governmental regulations or environmental public instruction’s
rules that apply in your country or area.
• Do not recharge, short-circuit, heat, burn or disassemble
batteries.
Using the Remote Control
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote controls for different devices can interfere with
each other. Avoid using remote controls for other devices
located close to the unit.
• Replace the batteries when you notice a fall-off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
-Line of sight: approx. 23 feet (7m)
-Either side of the center: approx. 16 feet (5m) within
30°
-Above: approx. 16 feet (5m) within 15°
-Below: approx. 10 feet (3m) within 30
16 feet (5m)
30˚
16 feet (5m)
30˚
23 feet (7m)
TITLE
OPEN/
CLOSESOURCE
STANDBY-ON
15
19
20
21
24
27
31
1
2
4
6
8
10 9
13
3
25
17
16
12 11
14
29
7
22
23
26
28
30
32
18
5
1. STANDBY-ONybutton (DVD/VCR)
• Press to turn On the unit or to switch the unit to
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
2. Number/Character buttons (DVD/VCR)
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main
menu.
• Press to enter title names.
• Press to start the index/time search in VCR mode.
3. DISPLAY button (DVD/VCR)
• Press to display the display menu On or Off.
4. DISC MENU button (DVD)
• Press to display the disc menu.
5. OK button (DVD/VCR)
• Press to confirm or select menu items.
6. SETUP button (DVD/VCR)
• Press to display the main menu.
7. VCR button (DVD/VCR)
• Press to select the VCR output mode.
8.
H(previous) button (DVD)
• During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is in pause, press repeatedly to reverse
the playback step by step.
• During playback, press twice in quick succession to
skip to the previous chapter or track.

English
Français
Español
EN –13 –Continued on next page.
9.
E(reverse) button (DVD/VCR)
DVD mode:
• During playback, press to fast reverse playback.
• When playback is paused, press to slow reverse
playback.
VCR mode:
• During playback, press to rewind the cassette tape or
to view the picture rapidly in reverse.
• Press to fast reverse the cassette tape in stop mode.
10. CM SKIP button (DVD)
• During playback, press to skip 30 seconds.
11.
F(pause) button (DVD/VCR)
• Press to pause playback or recording.
12. D.DUBBING button (DVD/VCR)
• Press to start VCR to DVD (DVD to VCR) duplication,
which you set in the main menu.
13. REC MODE button
• Press repeatedly to switch the recording mode.
14. SOURCE button (DVD/VCR)
• Press to select the appropriate input.
15. OPEN/CLOSE
Abutton (DVD/VCR)
DVD mode:
• Press to open or close the disc tray.
VCR mode:
• Press to remove the cassette tape from the cassette
compartment.
16. TRACKING + /-buttons (VCR)
• Press to adjust the tracking during playback or in slow
motion of the cassette tape.
• While playback is in still mode, you can adjust the
picture to remove vertical blur.
17. HDMI button (DVD)
• Press to set the HDMI connector’s video signal output
mode.
18. CLEAR button (DVD/VCR)
DVD mode:
• Press to clear the password you are entering, to cancel
the programming for CD, to clear the selected marker
number, etc.
VCR mode:
• Press to reset the tape counter.
19. AUDIO button (DVD/VCR)
DVD mode:
• Press to display the audio menu during playback.
VCR mode:
• During playback of a Hi-Fi videotape, press to change
the audio out setting.
20. TIMER button (DVD/VCR)
• Press to display the timer programming list.
21. TITLE button (DVD)
• Press to display the title list.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode to
the interlace mode.
22. Cursor
K/L/0/ 1 buttons (DVD/VCR)
• Press to select items or settings.
23. RETURN button (DVD/VCR)
• Press to return to the previously displayed menu
screen.
24. DVD button
• Press to select the DVD output mode.
25.
B(play) button (DVD/VCR)
• Press to start playback or resume playback.
26.
G(next) button (DVD)
• During playback, press to skip to the next chapter,
track or file.
• When playback is paused, press repeatedly to forward
the playback step by step.
27.
C(stop) button (DVD/VCR)
• Press to stop playback or recording.
DVD mode:
• Press to exit from the title list.
28.
D(forward) button (DVD/VCR)
DVD mode:
• During playback, press to fast forward playback.
• When playback is paused, press to slow forward
playback.
VCR mode:
• During playback, press to rapidly advance the cassette
tape or view the picture rapidly in forward.
• When playback is paused, press to view the cassette
tape in slow motion.
• Press to fast forward the cassette tape in stop mode.
29. RAPID PLAY button (DVD)
• During playback, press to play in a slightly faster/slower
mode while keeping the sound output.
30. SEARCH button (VCR)
• Press to call up the index or time search menu.
31. TIMER SET button (DVD/VCR)
• Press to set the unit in the timer standby mode. In the
timer standby mode, press to cancel the mode and to
turn the unit On.
32.
I REC button (DVD/VCR)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
Note(s)
• When the unit is in standby mode, press [C
A] on the unit as
[A]on the remote control is not available.

Español
Français
English
–14 –EN
Front Panel Display
PM
BS CS DR CD
VCR
HDDDB
DVD
4
231
1.
PM
• Appears in the afternoon with the clock display.
2. Title / track / file and chapter mark
• Appears when indicating a title / track / file number.
• Appears when indicating a chapter number.
3. Current status of the unit
• Appears when playback is in pause or in step by
step playback.
• Appears when playing a disc or a cassette tape.
• Appears during slow forward / reverse playback.
• Appears when the timer programming or OTR has
been set or is proceeding.
• Flashes when all timer recordings have been
finished.
• Appears during the recording process.
• Flashes when recording is paused.
• Appears when this unit is in DVD output mode
and a disc is in the unit.
• Appears during duplication process.
• Appears when this unit is in VCR output mode and
a cassette tape is in the unit.
• Appears during duplication process.
V
C
R
• Appears when this unit is in VCR output mode.
• Appears when the timer recording is proceeding
for VCR.
• Appears when VCR is in timer recording standby
mode.
• Flashes when a program cannot be performed for
some reason.
DVD
• Appears when this unit is in DVD output mode.
• Appears when the timer recording is proceeding
for DVD.
• Appears when DVD is in timer recording standby
mode.
• Flashes when a program cannot be performed for
some reason.
DB
• Appears during VCR to DVD duplication process.
• Appears during DVD to VCR duplication process.
4. Displays the following
• Elapsed playback time
• Current title / chapter / track / file number
• Recording time / remaining time
• Clock
• Selected external input position
• Remaining time for one-touch timer recording
• Selected HDMI output mode
• VCR tape counter
Display Message
DVD
• Appears when the disc tray is opening.
DVD
• Appears when the disc tray is closing.
DVD
• Appears when a disc is loaded on the disc tray.
DVD
• Appears when data is being recorded on a disc.
DVD
• Appears when HDMI output mode (480p) is selected.
DVD
• Appears when HDMI output mode (720p) is selected.
DVD
• Appears when HDMI output mode (1080i) is selected.
DVD
• Appears when HDMI output mode (1080p) is selected.

English
Français
Español
EN –15 –Continued on next page.
Connection
Read this first:
1. Disconnect the AC power cords of the devices from the AC outlet.
2. Make the connection as illustrated below.
3. After making all the connections, connect the AC power cords of the devices.
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to another VCR, pictures may be
distorted due to the copy protection system.
Connecting to an External Tuner
VIDEO IN
AUDIO IN
L
R
L
R
I N --- AU D IO --- OU T
IN ---VIDEO--- OU T
ANT. INANT.OUT
LR
VIDEO OUTAUDIO OUT
Rear of this unit
external tuner
RCA audio cable
RCA video cable
satellite
dish
ANT. IN
cable TV
company
RF coaxial
cable
RF coaxial
cable
or
RCA video cable
RCA audio cable
Note(s)
• Required cables and connecting methods differ depending on the external tuner. For more information, please contact your external
tuner provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the external tuner. When using the external tuner connect the
unscrambled cable signal to the external tuner and then send the output cable signal from the unit to the Cable Box. Be sure that the
external tuner is turned On.
• You cannot record one channel while watching another channel.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
TV Connection Overview
If Your TV has Refer to
Standard
Quality
Higher
Quality
If your device only has
an ANT. IN jack
COMPONENT VIDEO IN
AUDIO IN
LR
VIDEO IN
S-VIDEO IN
ANT. IN
HDMI IN page
16 page
18
page
16
page
17
page
17

Español
Français
English
–16 –EN
Connecting to a TV with an HDMI™
Compatible Port
• HDMI outputs the video / audio signals without converting
to analog signals.
• No audio connection is required.
HDMI IN
Rear of this unit
HDMI OUT
HDMI cable
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.
Cables not included.
Please purchase the necessary cables at your local store.
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The output
mode changes as follows every time [HDMI] is pressed.
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
• An HDMI mode which is not supported by the display
device will be skipped.
Copyright protection system
To play the digital video images of a DVD via an HDMI
connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright
protection system called HDCP (High-bandwidth
Digital Content Protection system). HDCP is copy
protection technology that comprises data encryption
and authentication of the connected AV device. This unit
supports HDCP. Please read the operating instructions of
your display device (or AV amplifier) for more information.
Notes for HDMI Connection
• Because HDMI is an evolving technology, it is possible that
some devices with an HDMI input may not operate properly
with this unit.
• When using an HDCP-incompatible display device, the image
will not be displayed properly.
• Among the devices that support HDMI, some devices can
control other devices via the HDMI connector; however, this
unit cannot be controlled by another device via the HDMI
connector.
• When this unit’s HDMI connector is connected to a DVI-D
compatible monitor (HDCP compatible) with an HDMI-DVI
converter cable, the signals are output in digital RGB.
• If a power failure occurs or you unplug the unit, some problems
in the HDMI setting may occur. Please check and set the HDMI
setting again.
Connecting to a TV with Component
Video Input Jacks
DVD / VCR
Y
PB
/CB
PR
/CR
COMPONENT
VIDEO OUT
Y
PB
/CB
PR
/CR
COMPONENT
VIDEO IN
AUDIO IN
L
R
RCA audio cable
L
R
AUDIO
OUT
RCA component video cable
(Green)
(Blue)
(Red)
(Green)
(Blue)
(Red)
Rear of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your
local store.

English
Français
Español
EN –17 –Continued on next page.
Connecting to a TV with an S-Video
Input Jack
AUDIO IN
L
R
S-VIDEO IN
Rear of this unit
S-VIDEO
OUT
AUDIO
OUT
L
R
RCA audio cable
S-video cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your
local store.
Connecting to a TV with Audio / Video
Input Jacks
AUDIO IN
L
R
VIDEO IN
L
R
IN ---AUDIO---OUT
IN ---VIDEO---OUT
Rear of this unit
RCA audio cable
RCA video cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1

Español
Français
English
–18 –EN
Connecting to a TV without Audio / Video Input Jacks
L
R
IN ---AUDIO---OUT
I N --- VI DE O --- OUT
If your TV only has an Antenna input
(no A/V inputs), you will need an
RF modulator
(NOT INCLUDED)
to connect this unit.
RF modulator
AUDIO IN
RL
VIDEO IN
CHANNEL
43
TO TV
TV
ANT. IN
ANT. IN
No Antenna (RF) Output!
AUDIO IN TO TVANT. IN
LR
CHANNEL
43
VIDEO IN
VIDEO OUT
LR
AUDIO OUT
ANT. IN
Rear of this unit
RCA audio cable
RCA audio cable
RCA video cable
RCA video cable
RF modulator
VHF / UHF
antenna
cable TV
company
or
Set channel 3 or 4
Set channel 3 or 4
RF coaxial cable
RF coaxial cable
RF coaxial cable
ANT. INANT.OUT
external tuner
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note(s)
• The RF modulator is not supplied with this unit. You need to purchase it at your local
store.
• The quality of the picture may become poor if this unit is connected to an RF modulator.

English
Français
Español
EN –19 –Continued on next page.
Digital Audio Connection
Coaxial Cable Connection
DIGITAL
AUDIO OUT
COAXIAL
COAXIAL
Rear of this unit
Dolby Digital decoder
digital audio
coaxial cable
digital audio
coaxial input jack
HDMI Audio Connection
HDMI OUT
HDMI IN HDMI
cable
AV receiver / amplifier with an HDMI input jack
To set up “HDMI Audio” refer to pages 55 and 59.
To set up “Dolby Digital” refer to pages 54 and 57.
Audio format
(disc)
Dolby Digital
Setting of this unit
HDMI Digital Output
Dolby Digital PCM 2channel PCM 2channel PCM
Stream Dolby Digital Dolby Digital
LPCM PCM 2channel PCM —
Stream
Actual Output
Cables not included.
Please purchase the rest of the necessary cables at your
local store.
Note(s)
• The audio source on a disc in a Dolby Digital multi channel
surround format cannot be recorded as digital sound by an MD
or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi channel surround sound
similar to movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
2 Channel Analog Audio Connection
RCA Audio Cable Connection
LR
Stereo system
Analog audio
input jacks
AUDIO IN
L
R
I N --- AU D IO --- OU T
I N --- VI DE O --- OUT
AUDIO
OUT
L
R
or
RCA audio cable
Rear of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1

Español
Français
English
–20 –EN
Before You Start
After you have completed all the connections, you must find
the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your
TV
Examples of Input Mode Names for Common TV Brands
Admiral AUX Magnavox AUX CHANNEL
Curtis Mathis
LINE1, LINE2,
00, 90, 91, 92, 93
Panasonic TV/VIDEO
GE
INPUT, TV/VCR,
00, 90, 91, 92, 93
RCA
INPUT, TV/VCR,
LINE1, LINE2,
00, 90, 91, 92, 93
Samsung TV/VIDEO
Hitachi INPUT, AUX Sanyo VIDEO
JVC
VIDEO,
VIDEO1,
VIDEO2,
VIDEO3
Sharp 00
Sony
VIDEO1,
VIDEO2,
VIDEO3
Kenwood AUX Toshiba TV/GAME
LXI-Series 00 Zenith 00
Note(s)
• Video input selection varies for different brand’s models of
TVs.
• Consult your TV manufacturer if none of the above are
successful.
1 After you have made all the necessary connections,
press [y]to turn On the unit.
2 Turn On your TV.
• If connected to your VCR, make sure it is switched Off or to
standby mode before proceeding.
3 Press on the TV’s remote control, then press
channel down button repeatedly until the “Initial Setup”
menu is displayed.
Initial Setup
Select the language for Setup display.
OSD Language
English
Français
Español
This is the correct viewing channel (external input channel) for
the recorder.
• For some TVs, there may be a button on the TV’s remote
control that accesses the external input channel. It may be
labeled “SOURCE”, “AV” or “SELECT”. In such a case, press
it repeatedly. Refer to your TV’s User Manual for details.
• If more than 10 minutes have passed since you turned On
the unit, you may see the screen saver instead of the “Initial
Setup” menu.
Screen saver:
4 Proceed to step 2in “Initial Setting” (p.24)