Magnavox 13MC3206 - Tv/dvd Combination User manual

OR
3
CABLE BOX
CABLE TV SIGNAL
RF COAXIAL
CABLE
ANTENNA or
CABLE TV SIGNAL
2
4
IN
OUT
ANT.ANT.
1Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT(enna)
jack on the rear of the TV/DVD.
3If you do have a Cable Box or Satellite Receiver, first connect the Cable TV or Satellite signal to the IN jack
on the Cable Box or Satellite Receiver. Then, use an RF coaxial cable (not supplied) to connect the OUT
jack of the Cable Box or Satellite Receiver to the ANT(enna) jack on the TV/DVD. To view any channel, set the
TV/DVD to the output channel of the Cable Box or Satellite Receiver (channel 3 or 4).Then, select channels at the Cable
Box or Satellite Receiver.
4When all connections are complete, plug the power cord of the TV/DVD into an active power outlet.
5Press STANDBY-ONyon the TV/DVD or its remote to turn on the unit.
13MC3206
There are many ways to connect your new TV/DVD to your other equipment.This Quick Start Guide shows
the easiest, most common connections for the TV/DVD.
T8201UB_QSG_EN 3/7/06 12:03 PM Page 1

Quick Start Guide (cont’d)
Quick Start Guide (cont’d)
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Watching TV
1Press STANDBY-ONyto turn on the TV/DVD.
2This unit memorizes TV channels when you connect an Antenna or
Cable TV signal as described in this Quick Start Guide.
To watch TV, use CH. ▲/▼to select memorized channels. If a channel
is skipped, use the Number buttons to select it.To update your channels
later, refer to the owner’s manual.
3Press VOL. X/Yto adjust the volume.
Playable Discs
The TV/DVD will play the following discs.
is a trademark of DVD Format/Logo Licensing Corporation.
Windows Media is a trademark of Microsoft Corporation.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
1
ALL
MODE
SELECT
PICTURE
/SLEEP
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
ENTER
123
456
STANDBY-ON OPEN/CLOSE
VOLUME 20
0
123
456
789
+10
+100
CLEAR
PREV NEXT
PLAY
STOP
RETURN
DISC SET-UP
MENU
SLOW PAUSE
TITLE
STANDBY-ON OPEN/CLOSE
ENTER
1
2
3
1
2
4
Printed in Malaysia
8239 300 47381
1EMN21732
T8201UB*****
Playing a DVD
1With the unit on, press OPEN/CLOSE A
to open the disc tray. The unit will switch to
DVD mode automatically.
2Place a disc on the tray, with the label
facing up and the shiny side facing down.
3Press PLAY B.The tray will close and
playback will begin. If playback does not start
automatically, press PLAY Bagain. If a DVD
Menu appears instead, use KLsB,ENTER or
the Number buttons to choose features or
start play from the menu.
4Press STOP Cto stop playback.
STANDBY-ON
LABEL
3
T8201UB_QSG_EN 3/7/06 12:03 PM Page 2