MAGNER 211 Operation Manual V1.3
Page 9 of 16
Modes shift:
Under main interface, press Key to switch the counting mode,
from MIX-COUNT to SDC-COUNT, which means mixed counting and
single denomination counting. The display interface is as below:
Under MIX-COUNT mode, all the genuine coins will go to pocket 1;
under SDC mode, press Key to choose the single denomination
you want to sort, for example €2.00，0.50，1.00，0.20，0.05，0.10，
0.02，0.01. Based on the denomination you choose, the genuine coins
with the same denomination will go to pocket 1, the other coins will go
to reject pocket.
Data Clear:
·Under main modes interface, press CLR key to clear all counted data.
·Under main modes interface, press ESC key to clear rejected coin
record.
Data Memory:
·Under main interface,press M+Key to save the quantity and amount
for genuine coins.It saves the accumulated data of the counting
results 。Under main interface, when the counting quantity and
amount for genuine coins is 0, you can press M+ key to clear the
saved data.
Data Memory Read:
·Under main modes interface, press MR key to read stored data;
·Under self-learning interface, press M+ Key to read the original
self-learning data, this function is only available for maintenance
people.
