Mainstays MSW-10000 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2019-06-03 Rev. 0001-A
Media Fireplace with 2 shelves and remote control
Stock # MSW-10000
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Media Fireplace with 2 shelves and remote control
MODEL # MSW-10000
MADE IN CHINA
MAXIMUM RECOMMENDED WEIGHT LOADS
PLACE TV BEHIND THE STOPPER
FITS UP TO MOST 139.7 cm / 55”
DIAGONAL FLAT PANEL TVs
MAXIMUM LOAD 45.3 kg / 100 lb
MAXIMUM LOAD 22.7 kg / 50 lb
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT
PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT
LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR
EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTER OF THE UNIT; THE
BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE
UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR
FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND
WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.
FOR USE WITH TELEVISIONS WEIGHING 100LBS (45.3 KG) OR LESS. USE WITH HEAVIER
TELEVISIONS MAY RESULT IN INSTABILITY CAUSING TIP OVER RESULTING IN DEATH OR
SERIOUS INJURY.

3
Important
Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-
abrasive surface. You will need the parts identified on page 4 of this instruction manual.
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED
OFF WITH DAMP CLOTH.
Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.
You are now ready to assemble the fireplace.
XXFINAL
1 2 43

4
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Top Panel (Qty. 1) B- Top Front Stretcher (Qty. 1) C- Top Back Stretcher (Qty. 1)
D- Left Side Frame (Qty. 1) E- Right Side Frame (Qty. 1) F- Bottom Panel (Qty. 1)
G- Bottom Front Stretcher (Qty. 1) H- Partition Panel (Qty. 1) I- Middle Stile (Qty. 1)
J- Adjustable Shelf (Qty. 1) K- Center Support w/Leveler (Qty. 1) L- Stop Rail (Qty. 1)
Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1)
(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M4 x 50 mm Screw
(Qty. 26+1 extra) (Qty. 26+1 extra) (Qty. 21+1 extra) (Qty. 2+1 extra)
(5) Shelf Support (6) Cam Lock Cover Glue Touch-up Pen Tipping Restraint Hardware Kit
(Qty. 4+1 extra) (Qty. 2+1 extra) (Qty. 1) (Qty. 1) (Qty. 2)(Included in plastic bag)
Tools required: Phillips screwdriver and rubber mallet (not provided).

5
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A) and Bottom
Panel (F) using a Phillips screwdriver.
A
F
2
②x 16

6
Assembly Instructions
3. Securely screw the Cam Bolts (2) into the designated small holes on the Side Frames (D and E),
Partition Panel (H) and Middle Stile (I) using a Phillips screwdriver.
②x 10
2
D
EH
I

7
Assembly Instructions
4. Glue the Wood Dowels (3) into side holes of the Partition Panel (H) and Middle Stile (I).
③x 8
H
I
33
3
3
3
3
3
3
3
3

8
Assembly Instructions
5. Align and attach the Middle Stile (I) to the Partition Panel (H) by engaging two Cam Locks (1) (Refer to
page 3 on Cam Lock system operation supplement).
H
I
1
1
①x 2

9
Assembly Instructions
6. Glue the Wood Dowels (3) into side holes of the Bottom Front Stretcher (G) and Bottom Panel (F).
F
G
3
3
3
3
3
3
33
③x 6

10
Assembly Instructions
7. Attach the Bottom Front Stretcher (G) to the Bottom Panel (F) by engaging four Cam Locks (1).
F
G
1
1
1
1
①x 4

11
Assembly Instructions
8. Align and attach the Partition Panel assembly to the Bottom Panel (F) with two 50 mm Screws (4).
④x 2
4
4
F
H

12
Assembly Instructions
9. Attach the Top Front Stretcher (B) to the Middle Stile (I).
H
B
F

13
Assembly Instructions
10. Attach Right Side Frame (E) to Bottom Panel (F) and Top Front Stretcher (B) by engaging three Cam
Locks (1).
①x 3
1
1
1
BF
E

14
Assembly Instructions
11. Attach the Top Back Stretcher (C) to the Partition Panel (H) by engaging one Cam Lock (1).
1
C
H

15
Assembly Instructions
12. Repeat the same procedure to attach the Left Side Frame (D) at the opposite end.
①x 4
1
1
1
1D
C
F

16
Assembly Instructions
13. Remove the plastic cap from the hanger bolt of the Center Support (K). Securely screw the Center
Support (K) into the threaded insert on the Bottom Panel (F) and set the attached floor leveler on the
center support to the correct height.
F
K

17
Assembly Instructions
14. Ask for assistance to stand the assembled unit upright.
15. Glue seven Wood Dowels (3) into top inner holes of the previous assembly.
B
E
CD
3
3
3
3
3
3
3
3
3
③x 7

18
Assembly Instructions
16. Position the Top Panel (A) onto the inserted Wood Dowels (3) and fasten it in place by engaging the
Cam Locks (1).
A
1
E
B
CD
H
①x 12

19
Assembly Instructions
17. Unpack the fireplace insert from the inner box and follow the instructions to install the Top Trim and
Side Trims to the fireplace insert.
18. Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening.
DO NOT drag the insert across the Bottom Panel (F) as it may scratch the unit.
19. Fasten the fireplace insert to the mantel with six insert screws as shown.
A
⑱ x 6

20
Assembly Instructions
20. Plug the Cam Lock Covers (6) onto the visible Cams Locks to conceal the Cams.
21. Insert the Shelf Supports (5) into the desired holes in the side of the compartment. Make sure you place
the four Shelf Supports in the same level so the shelf is not tilted. Tilt and rest the Adjustable Shelf (J)
onto the Shelf Supports (5).
5J
6
DH
J
5
⑥x 2
⑤x 4