Majestic Td1920usa User manual

TD1920USA

INSTRUCTION MANUAL

Unit andAccessoriesGetting StartedFront ViewRearrviewRemote Control Key FunctionsMenu OperationBasic operationPicture menu optionsAudio menu optionsSetup menu optionsFeature menu optionsParental menu options Specifications Help3445677101091213151617242312CautionSafety InformationFeature menu options in VGAFeature menu options in Y Pb PrDVD Operation Downloaded from www.Manualslib.com manuals search engine

cautionCautionThe lightening flash with arrowhead symbol, within an equilateral triangle isintended to alert the user to the presence of un-insulated "dangerous voltage"within the products enclosure that may be of sufficient magnitude to constitute arisk of electric shock to the persons.The exclamation point within an equilateral triangle is intend to alert the user tothe presence of important operating and maintenance (servicing) instructions inthe literature accompanying the appliance.Correct disposal of this ProductWaste Electrical & Electronic Equipment (WEEE)Your product is designed and manufactured with high quality materials andcomponents which can be recycled and reused.This symbol means that electrical and electronic equipment, at their end-of-life,should be disposed of separately from your household waste.Please dispose of this equipment at your local community wastecollection/recycling centre.In the European Union there are separate collection systems for used electricaland electronic products. Please help us to conserve the environment we live in!1 Downloaded from www.Manualslib.com manuals search engine

Safety InformationTo ensure reliable and safe operation of this equipment, please read carefully all theinstructions in this user guide, especially the safety information below.Electrical safetyTheTV set should only be connected to a main supply which matches that stated onthe label.To prevent overload, don't share the same main supply socket with too many otheritems of equipment.Do not place any connecting wires where: they may be stepped on or tripped over.Do not place heavy items on them, which may damage the leads.Hold the main plug, not the wires, when removing from a socket.During a thunderstorm or while leaving theTV for long periods, set the switch off.Do not allow water or moisture to enter theTV or mains adaptor. Do NOT use in wet ormoist areas, such as Bathrooms, steamy kitchens or near swimming pools.Pull the plug out immediately, and seek professional help if: the mains plug or cable isdamaged, liquid is spilt onto the set, or if it is accidentally exposed to water or moisture,anything accidentally penetrates the ventilation slots, the set doesn't work normally.Do not remove the safety covers.There are no user serviceable parts inside.You mayinvalidate the warranty.This apparatus must only be serviced by qualified personnel.To avoid battery leakage, remove exhausted batteries from the remote control, or whennot using far a long period.Do not break open or throw exhausted batteries on a fire.Physical saetyfDo not block ventilation slots in the back cover.You may place theTV in a cabinet, butensure at least 5cm (2") clearance all around.Do not tap or shake theTV screen, or you may damage the internal circuits.Take goodcare of the remote control.To clean theTV with a soft dry cloth. Do not use solvents or petrol based fluids.Do not install near any heat sources such as radiators, heat registers stoves or otherapparatus (including amplifiers) that produce heat.Do not defeat the safety purpose of the polarized or grounding-type plug.A polarizedplug has two blades with one wider than the other.A grounding type plug has twoblades and a third grounding prong, the wide blade or the third prong is provided foryour safety. If the provided plug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs.Use only attachments/accessories specified by the manufacturer.Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the appar

tus has been damaged in any way, such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus, has been exposed torain or moisture, does not operate normally or has been dropped.Please always connect an apparatus with Class I structure to a main socket with protec-tive earthing connection.Please make sure both main plug and appliance coupler work properly.2 Downloaded from www.Manualslib.com manuals search engine

Unit andAccessories and Product FeatureMain cableMain adaptor(only for 19 inches ) 3 AccessoriesASPECTPOWERMUTE1592603748P.MODES.MODESLEEPDISPLAYMENUSOURCE

D.Setup

EXIT

D.MENU

D.TITLE

GOTO

D.DISP

PROG

INTROREPEATAUDIOANGLEZOOMA-BVOL+CH+CH-VOL-

SUBTITLE

CCMTSENTERFAVFAV+FAV-EPG

Getting StartedGetting Started(IR) Infrared Receiver: Receives IR signals from the remote control.(Power on/Standby) LED Indicator: PressPOWER to turn on and off,Indicator on(Red) Standby modeIndicator on(Green) Power on mode4 1.VOL+/VOL- Adjust the volume and move cursor left/right.2.CH+/CH- Select channels or move cursor up/down.3.MENU Display the on-screen menu.4. SOURCE Display input source.5.POWER6.Remote SensorSet your TV to power on or standby mode.612345Downloaded from www.Manualslib.com manuals search engine

Getting StartedName Function DescriptionPOWER (DCIN)VGA INHDMI INVGA signal from computer outputYPbPrConnect to the composite terminal of your DVD/VCRS-ideo INVS-Video signal inputVideo INVideo signal input(AL/RUDIO)Audio signal input for AVPC Audio inPC audio inputEarphoneConnect it to your head phone or other audio equipmentConnect to antenna or cable sourceConnect to Mains AdapterConnect to HDMI of DVD or other equipmentANT 75Ω5DC 11V-24V

Remote Control Key Functions6SLEEP: Select amount of time before TV turn off automatically.S.MODE: Press to cycle through the different sound settings P.MODE:Press to cycle through the different picture settings MTS: Press to select the audio mode,you can select stereo,Mono,or SAP(second audio program).Set or cancel current channel to be a favourite channel.D.MENUD.TITLEINTROA-BD.DISPCH +/- : Press to scan through or to select a channel.V +/-: Press to increase / decrease the sound level.During the playback,press this button to repeat playback of a specific section on a disc.ASPECTASPECTPOWERMUTE1592603748P.MODES.MODESLEEPDISPLAYMENUSOURCE

D.Setup

EXIT

D.MENU

D.TITLE

GOTO

D.DISP

PROG

INTROREPEATAUDIOANGLEZOOMA-BVOL+CH+CH-VOL-

SUBTITLE

CCMTSENTERFAVFAV+FAV-EPGD.SETUPIf you play CD,it will scan program with 3S.Downloaded from www.Manualslib.com manuals search engine

Menu Operation Menu OperationBasic operation

Intitial Setup Menu

NOTE: If this is the first time you run the LCD TV, the Initial Setup Menu will appear in the picture, and the items of this menu also exist in other menus, so you are able to change the values after you set them up.

Tuning BandInitial Setup MenuMenu LanguageAuto Ch SearchEnglishAir

To MoveTo SelectTo ExitEnterMenu

Menu Language Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.Auto Ch SearchPress ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.Tuning BandSelect Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.

Choosing a TV channel

1. Press CH+/CH- button on the front panel or on the remote control. Press CH+ button for the next channel Press CH - button for the previous channel.2. Press 0-9 buttons and -/-- button. You can select the channel by pressing 0 to 9 buttons directly for the channel you want.3. Example: To select 1-digit channel (e.g. Channel 5): Press the 5 and ENTER button. To select 2-digit channel (e.g. Channel 20): Press the 2 and 0 buttonts,then press ENTER button. To select 3-digit channel (e.g. Channel 103): Press the 1 and 0 and 3 buttons,then press ENTER button. Note: After select the digit button, the digit will be memorized.Press the button to enter a program number for digital program channel.-/--To select a program number for multiple program channel (e.g. Channel 2-1):Press the 2 button, then press -/-- and 1 button,then press ENTER button. 7

Menu Operation

Volume adjustment

1. Press VOL+/- to adjust the volume.button 2. Press MUTE( ) button to mute the TV, Press MUTE( ) button again or VOL+/- button to cancel the mute function.

Volume40

OSD Adjustment

- Press MENU button to display the main menu. - Press buttons to select the available menus. ◄/►/▲/▼

PictureAudioSetupFeatureTo MoveTo SelectTo ExitEnterPicture ModeMenuContrast 50Brightness 50Sharpness 50Color 50Tint 50Aspect RatioStandardFull screenAudioSetupFeatureAudio ModeAudio LanguageBass 50Treble 50Balance 0VoicePictureEnglishAudioSetupFeatureTuning BandSignal LevelAuto Channel SearchAdd On SearchChannelManual SetChannelChannel LabelsAirPictureMenu LanguageEnglishAudioSetupFeatureTime SetSleep TimerAdvanced Video MenuParental ControlPictureOffClosed CaptionResetTo MoveTo SelectTo ExitEnterMenuTo MoveTo SelectTo ExitEnterMenuTo MoveTo SelectTo ExitEnterMenu

The OSD ( On Screen Display) in this document may be different from your TV’s, because this is just anreference for your product.8

Menu OperationPicture menu optionsContrastPress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the contrast of the picture.BrightnessPress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the brightness of the picture.SharpnessColorPress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the color saturation of the picture.Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the sharpness of the picture.Select Picture Mode in PICTURE menu. (Available picture mode: Standard, Vivid, Bright, User.)You should set the Picture Mode to “User” first if you want to change the value of Contrast/Brightness/Sharpness/Color/Tint,TIPS: you can select the picture mode directly by pressing PMODE button repeatedly. Picture ModeTintPress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the tint of the picture.Aspect RatioPress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the aspect ratio of the picture.(Available aspect ratio: FullScreen, Normal, Zoom, Wide, Cinema, Waterglass.)NOTE: The Tint item is not available but in NTSC color system. Press MENU button on the front panel or the remote control todisplay the main menu.Press ▲/▼ button to select the PICTURE menu, then press► button for the submenu. Press ▲/▼ button to select the item you want to adjust.Press ENTER/► button repeatedly to adjust the value.When you are satisfied with your choice, press ◄ button to goto the previous menu, or press MENU/EXIT button to exit.

PictureAudio

SetupFeatureTo MoveTo SelectTo ExitEnterPicture ModeMenuContrast 50Brightness 50Sharpness 50Color 50Tint 50Aspect RatioStandardFull ScreenContrast50

Selecting input source

You can select the input source by pressing input button on the remote control or on the front panel.9DVD

Menu OperationAudio LanguageBassTrebleBalancePress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the sound balance.Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the bass value.Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the Treble value.Setup menu optionsAudio ModeTuning Band

Audio

SetupFeatureAudio ModeAudio LanguageBass 50Treble 50Balance 0VoicePictureEnglishTo MoveTo SelectTo ExitEnterMenu

AUDIO menu optionsPress MENU button on the front panel or the remote control todisplay the main menu.Press ▲/▼ button to select the AUDIO menu, then press► button for the submenu. Press ▲/▼ button to select the item you want to adjust.Press ENTER/► button repeatedly to adjust the value.When you are satisfied with your choice, press ◄ button to goto the previous menu, or press MENU/EXIT button to exit.Select Audio Mode in AUDIO menu. (Available audio mode: .)You should set the Picture Mode to “User” first if you want to change the value of Bass/Treble.TIPS: you can select the picture mode directly by pressing SMODE button repeatedly.User/Voice/Concert/JazzPress ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the audio language.NOTE: This item will be unavailable if the program system does not provide several audio languages.Press MENU button on the front panel or the remote control todisplay the main menu.Press ▲/▼ button to select the SETUP menu, then press► button for the submenu. Press ▲/▼ button to select the item you want to adjust.Press ENTER/► button repeatedly to adjust the value.When you are satisfied with your choice, press ◄ button to goto the previous menu, or press MENU/EXIT button to exit.Select Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.

AudioSetupFeatureTuning BandSignal LevelAuto Channel SearchAdd On SearchChannelManual SetChannelChannel LabelsAirPictureMenu LanguageEnglishResetTo MoveTo SelectTo ExitEnterMenu

Menu OperationAuto Channel SearchPress ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.Add On Channel SearchPress ▼ / ▲ button to select this item, then press ENTER/► button to enter the Add On Channel Search Program.Manual Channel SetPress ENTER button to display a channel list that you can select channel as below:

To MoveTo ChangeTo SelectEnterManual Channel Set MenuCh 42 -1 ATSCdmo ViewableCh 2 -0 ViewableCh 11 -0 ViewableCh 22 -0 ViewableCh 31 -0 ViewableCh 52 -0 ViewableCh 54 -0 ViewableCh 66 -0 ViewableCh 68 -0 ViewableChannel labels Allows you to name the channel selected. press ◄/► button to select the position of letter, press ▲/▼ button to set the name.Channel Labels MenuTo ExitExitCh 42-1ATSC dmoAnalog FoundAuto Ch Search - AirPerforming First PassDigital FoundScanningProgress(%) 1220

To ExitExit

To MoveTo ChangeSignal LevelIn DTV mode, you can refer the strength of the current channel ,and you can tune manually and adjust the angle, orienta-tion of the antenna etc.

Contrast80Weak Normal Good

Analog FoundAdd On Ch Search - AirPerforming First PassDigital FoundScanningProgress(%) 1220

To ExitExit

This function will add the channels not found before, and will not delete the channels unavailable at present.Menu Language Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.11

Menu OperationFeature menu optionsTime SetPress ▼ / ▲ button to select this item, then press ENTER/► button for Time Set Menu.

Time ZoneTime Set MenuTime Set ModeYearDateTimeAutoPacificMar 2910:00 AM2008Time Set ModePress ENTER/► button to select the time set mode from AUTO and MANUAL.You should set the Time Set Mode to “Manual” first if you want to change the value of Time Zone/Year/Date/Time.Time ZonePress ▼ / ▲ button to select this item, then press ENTER/► button to select the time zone for your TV.Sleep TimerSelect the sleep time to put automatically the TV in standby mode. Timer can be selected 60min/90 min/120 min/180 min/240 min/Off. Also you can select the sleep time by pressing SLEEP button repeatedly.as 5min/10min/15min/30min/45min/Advanced Video MenuPress ▼ / ▲ button to select this item, then press ENTER/► button for Advanced Video Menu.Advanced Video MenuNoise ReductionMediumNormalOnPress MENU button on the front panel or the remote control todisplay the main menu.Press ▲/▼ button to select the FEATURE menu, then press► button for the submenu. Press ▲/▼ button to select the item you want to adjust.Press ENTER/► button repeatedly to adjust the value.When you are satisfied with your choice, press ◄ button to goto the previous menu, or press MENU/EXIT button to exit.

AudioSetupFeatureTime SetSleep TimerAdvanced Video MenuParental ControlPictureOffClosed CaptionTo MoveTo SelectTo ExitEnterMenu

To MoveTo ExitExitTo SelectEnterColor Temperature3D Y/CAdaptive ContrastGradient EnableBlue ScreenAudio OnlyOnOnOnTo MoveTo ExitExitTo SelectEnterResetPress to reset all items to the default value. ENTER/► buttonOKCancelReset ALL?12

Menu Operationare unrated program.Adaptive ContrastPress ENTER/◄/► button to set the Adaptive Contrast on or off.Gradient EnableBlue ScreenAudio onlyPress ENTER/◄/► button to set the Gradient Enable on or off.Press ENTER/◄/► button to set the Blue Screen on or off.

Enter Password*Parental ControlParental ControlYou need to enter the password for the submenu. And the original password is 0000(Note:supper password is 1470 for parental control).To MoveTo SelectTo ExitEnterExitParental Control Menu

Password SetMaster LockUnrated lockUS RatingsCanadian RatingAdvanced RatingOnOn

Password SetYou need to enter the correct old password before setting a new password, and after set the new password, you need to enter it again to confirm it.Master LockPress ENTER/► button to set the Master Lock on/off, if you set this function on, all the parental control lock will beunavailable and it can play all kinds of programs.Enter Old Password*Enter New Password*Confirm New Password*Noise ReductionPress ENTER/◄/► button to select the level of noise reduction from Off/Low/Medium/High.Color TemperaturePress ENTER/◄/► button to select the color temperature from Cool/Normal/Warm.3D/YCPress ENTER/◄/► button to set the 3D/YC on or off.Unrated LockPress ENTER/► button to set the Unrated Lock on/off, if you set this function on, all the programs will be locked even they

Press ENTER/button to turn off the video picture ,listen the audio only.13

Menu Operation

Analog CCClosed CaptionCC ModeDigital CCAdvanced CC SettingsCC OffCC1CS1To MoveTo ExitExitTo SelectEnterClosed CaptionPress ▼ / ▲ button to select this item, then press ENTER/► button for Closed Caption Menu.CC ModePress ENTER/► button to select CC Mode from CC Off / CC On / CC on Mute.Analog CCDigital CCAdvanced CC SettingsPress ENTER/► button to select Analog CC Mode.Press ENTER/► button to select Digital CC Mode.Press ENTER/► button for Advanced CC Settings Menu.SizeDigital Closed CaptionStyleFontText ColorAutomaticAutomaticText OpacityBackground ColorBackground OpacityEdge EffectEdge ColorAutomaticAutomaticAutomaticAutomaticAutomaticAutomaticAutomaticCC SAMPLETo MoveTo ExitExitTo SelectEnterUS Ratings MenuMPAATV RatingNONEGPGPG-13RNC-17XCanadian Rating MenuCanadian EnglishCanadian FrenchECC8+GPG14+18+EG8 ans+13 ans+16 ans+18 ans+To MoveTo ExitExitTo SelectEnterNONETV-YTV-Y7TV-GTV-PGTV-14TV-MAALLLSVFVDTo MoveTo ExitExitTo SelectEnterUS RatingsPress ▼ / ▲ button to select this item, then press ENTER/► button for US Ratings Menu.Canadian Rating MenuPress ▼ / ▲ button to select this item, then press ENTER/► button for Conadian Rating Menu.- Style: you want to change the value of items below.- Size: Normal/Large and Small.- Font: From Font1 to Font7.- Text Color: Red/Green/Blue/Yellow/Magenta/Cyan/Black/White.Press ENTER/► button to select CC Style between Automatic and Custom, you need to set it to Custom first ifAdvanced RatingPress ▼ / ▲ button to select this item, then press ENTER/► button to set advanced rating on/off.14

Menu Operation- Text Opacity: Solid/Flashing/Transparent/Translucent.- Background Color: Black/White/Red/Green/Blue/Yellow/Magenta/Cyan. - Background Opacity: Solid/Flashing/Transparent/Translucent.- Edge Effect: None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.- Edge Color: Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.Feature menu options in VGAPress Input button to select the input source to VGA.

AudioSetupFeature

To MoveTo SelectTo ExitOKTime SetMenuSleep TimerAdvanced Video MenuPictureOffVGA Set

VGA SetPress ▼ / ▲ button to select VGA Set, then press ENTER/► button for VGA Setting Menu.

To MoveTo SelectTo ExitOKMenuVGA Setting-1024x768@60HzAuto AdjustSettingPresetH-Position 50 V-Position50 Clock50 Phase50

Phase Press ENTER/► button to adjust the phase of the picture.Clock Press ENTER/► button to adjust the clock of the picture.V-PositionPress ENTER/► button to adjust the vertical position of the pictureH-PositionPress ENTER/► button to adjust the horizontal position of the picture.Auto AdjustSetting Press ENTER/► button to auto adjust the VGA setting. Press ENTER/► button to reset the VGA setting to factory default.15

Menu Operation

AudioSetupFeature

To MoveTo SelectTo ExitOKTime SetMenuSleep TimerAdvanced Video MenuPictureOffYPbPr SetYPbPr Set

Component SetPress ▼ / ▲ button to select , then press ENTER/► button for Setting Menu.Y Pb Pr Phase Press ENTER/► button to adjust the phase of the picture.ClockThis function is unavailable in mode.Y Pb Pr V-PositionPress ENTER/► button to adjust the vertical position of the pictureH-PositionPress ENTER/► button to adjust the horizontal position of the picture.Auto AdjustSettingThis function is unavailable in Y Pb Pr mode. Press ENTER/► button to reset the Setting to factory default.Y Pb PrFeature menu options in Y Pb PrPress Input button to select the input source to .Y Pb Pr16