Majestic TD2220 User manual

TD2220
LCD TV with DVD Combo
LCD TV with DVD Combo

IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire or electric shock do not expose this,
equipment to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION TO AVOID THE RISK OF ELECTRIC SHOCK:,
DO NOT REMOVE COVER OR BACK().
NO USER SERVICEABLE PARTS INSIDE-.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to avoid the risk of
electric shock do not disassemble this equipment by anyone,
except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operating and maintenance instructions
in the literature accompanying the appliance.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure
Safety Instructions
TV User Guide
1

Do not place the equipment on any uneven or unstable carts,
stands tables shelves etc,, ..
The equipment may fall causing serious injuries to children or adults,
and serious damage to the equipment itself.
Use only a cart or stand recommended by the manufacturer.
This equipment and recommended cart or stand should be handled
with care Quick stops excessive force and uneven surfaces may., ,
cause the equipment and recommended cart or stand to overturn.
Do not disable the 3 wire grounding type plug The grounding pin-.
on the 3 prong plug is an important feature Removing the grounding-.
pin will increase the risk of damaging the equipment.
If you can not fit the plug into the electrical outlet contact an,
electrician to install a grounding outlet.
Always operate this equipment from the type of power source
indicated on the rear of the serial model plate/.
Never overload wall outlets and extensions.
Use and handle the power cord with care.
Do not place any heavy objects on the AC power cord.
Do not pull the AC power cord Do not handle the AC power cord.
with a wet hand.
Do not touch the power cord and antenna cable during lightning.
When the equipment has not been used for a long period of time,
unplug it from the wall outlet.
Do not place use or handle this equipment near water,.
Never expose the equipment to liquid rain or moisture,, .
Seek for service if any of the above is spilled into the equipment.
Do not expose the equipment to extreme temperatures or
to direct sunlight the equipment may overheat and can be damaged,.
Do not install the equipment near any heat sources such as
radiators heat registers stoves or any other apparatus,,,
that might produce heat.
To prevent any injuries the following safety precautions should be observed,
in the installation use servicing and maintenance of this equipment,, .
Before operating this equipment please read this manual completely,,
and keep it nearby for future reference.
IMPORTANT SAFETY INSTRUCTIONS
Safety Instructions
TV User Guide 2

Do not place or drop any other objects on top.
Do not attempt to service the equipment yourself.
Opening and removing the covers may expose you to dangerous
voltage or any other hazards and may void your warranty.
Refer service from qualified personnel.
Do not insert anything into the ventilation holes of your equipment Inserting any.
metal or flammable objects may result to fire or electric shock.
Do not place the equipment on uneven or unstable carts stands,,
tables shelves etc,..
The equipment may fall causing serious injuries to children or adults,
and serious damages to the equipment itself.
Always place the equipment on the floor or on a surface that
is sturdy level stable and strong enough to support,,
the weight of the equipment.
Do not block any ventilating openings leave an open space around the equipment,.
Never place the equipment :
on a bed sofa rug or any other similar surfaces,,, ;
too close to drapes curtains walls in a bookcase//, ,
built in cabinet or any other similar places that may cause-,
poor ventilation.
Always remove the cord from the outlet before cleaning the equipment.
Never use cleaners harsh or abrasive chemicals or solvents on the,
equipment Clean only with a dry soft lint free cloth.,,-.
IMPORTANT SAFETY INSTRUCTIONS
Safety Instructions
TV User Guide
3

CONTENT
CONTENT
TV User Guide 4

PREPARATION
PREPARATION
PREPARATION
Congratulations on the purchase of your new High Definition Compatible
Television In order to maximize the potential of this television you must use.,
it in conjunction with a High Definition Signal Source utilizing a proper High,
Definition receiving unit of ten referred to as a set top box Only true("-").""
High Definition transmit ted video will yield optimum picture quality.
Please contact your cable or satellite provider for more information on
how to receive High Definition programming.
5
1 set of Composite video input terminal
1 set of S VIDEO input terminal-
1 set of HDMI input terminal
1 set of VGA input terminal
Component Video Inputs
Offer the best video quality for DVD 480i 480p and digital set top box(/ ), --
(,) .HD1080i 720p connections
High Definition Multimedia Interface HDMI-()
This interface can accommodate a copy protected digital connection HDCP to other digital set top-()-
boxes that have compatible interface.
40
Features
Various Audio Video terminals for external equipment connection

PREPARATION
Package Contents
Power Cord
Remote control/
AAA batteries
Once you open the box make sure all of the following contents are included,.
If missing any items please return this product to the original place,
of purchase.
These items are all you need to set up and operate the TV
in its basic configuration.
*(,,.) .Most devices VCRs DVD player etc come with the necessary cable for connection
If you want to set up a complex system you may need to buy extra cable connector etc,,,.
9
PREPARATION 6
Instruction Manual
Instruction
Manual
TV
AC adapter
POWER
FAV CH+
PMODE
SAP
YPBPR
TV AV
HDMI
CHLIST
FAV LIS T ADD ERASE/
AUDIOLIST
SVIDEO
FAV CH-
SMODE
PC
ASPECT
FREEZE
MENU
EXIT
EPG
/
CC
EPG

PREPARATION
TV
7
PREPARATION
Front view
SOURCE
1- Selecct the input signals/Exit the menu
2- MENU/ENTER
3- Volume down adjustment
4- Volume up adjustment
5- TV channel down adjustment
6- TV channel up adjustment
7- Power On/Off
(SOURCE)
(MENU)
(VOL-)
(VOL+)
(CH-)
(CH+)
(POWER)

PREPARATION
PREPARATION 8
LCD TV
DVD
ITEM
2DVD Open Close/
1DVD PausePlay/
Front View

ITEM DESCRIPTION
2DC12VIN
1USB
Power input interface1 12V DC . ()
3 HDMI
5VGA
6 YPbPr
Connects to the composite A V output jacks on your video equipment./
Connects to the S VIDEO output jacks and Audio output jacks on
your video equipment.
-
8CVBS
Used to connect a video signal from a personal computer.
7S VIDEO-
Connects to a digital set top box or other deceives with a HDMI
interface.
-
The RF input that connects to your VHF UHF antenna or cable./
Connects to the -.sound output port of a personal computer
4 PC Audio
Earphone out interface.
9 Earphone out
10 RF 75Ω ()
LCD TV
TV
Connects the YPbPr output jacks on your video equipment.
Used to only update the programme.
1
POWER
2
3
4
5
6
7
8
EARPHONE
OUT
9
10
RF
PREPARATION
9
PREPARATION

Direct Channel selection numbers.
Press to enter a program number of multiple program channel.
Two bit TV channel select.
Press to turn TV set on or off.
MUTE
Press to mute sound press again to restore sound,.
2
09-
/ANGLE
3
SAP AUDIO/
Press to Select audio channel Select AUDIO mode in DVD mode./ ( ).
5
CC SUBTITLE/
6
Volume up down./
VOL+/-
7CH+/-
Channel up down./
8
DISPLAY
Press to display the source and channel s information’
9
Return your latest program Select DVD picture angle../
4
ENTER
10
Allows you to move select and setup the OSD options,.
1
MENU
11
EXIT EPG D SETUP//.
12
ASPECT
INPUT
13
FREEZE
14
17
20
21
15
18
SLEEP
16
19
Sets .the TV sleep time
Brings up the main menu to the screen
Remote Control
Press FAV CH to change backward Fav channel for TV Play with different speed/.+.
Press FAV CH to change forward Fav channel for TV Go to the files time preriod that you want to play./ .-
Press to open the favorite channel list DVD Play or Pause./ .
Exit from the current menu Press to display Electronic./
Programme Gudie menu Brings up DVD SETUP menu to./
the screen DVD Mode().
Press to select the aspect ratio.
Press to select various input sources.
Freezes picture press again to restore normal viewing,.
Press ADD ERASE to add or delete Favorite channel DVD Stop/./.
Press to display the closed caption To switch the dialogue at the./
bottom of the screen.
-/ +10
PREPARATION
PREPARATION 10
FAV LIST/
ADD ERASE//
FAV CH+/
FAV CH GOTO-/
2
3
5
6
8
7
9
4
10
1
11
12
13
14
17
20
21
15
18
16
19
POWER

PREPARATION
11
PREPARATION
LCD TV
Remote Control
PMODE
22
30
35
Select picture mode.
EPG/
SMODE
TITLE
PROG
REPEAT
D MENU.
INTRO
AB-
23
24
25
26
31
27
32
28
33
29
34
Select sound mode.
DVD Forward.
DVD Backward.
Bring up the DVD menu to the screen.
Change the display effect edit the playing order/.
Select repeat mode.
Bring up the DVD menu to the screen.
If you play CD it will scan program with 3s,.
Repeat from A to B.
Press to display Electronic Programme Guide menu
directly when your TV set is in digita TV mode.
/.DVD OPEN
Open the channel list of all received channels
/.DVD Previous
Press to display a audio program list menu.
/.DVD Next
TV AV SVIDEO PC YPBPR HDMI DVD// // / /
Just Hotkeys for INPUT sources
Press TV to select TV input sources.
Press AV to select AV input sources.
Press SVIDEO to select S VIDEO input sources-.
Press PC to select PC input sources.
Press YPBPR to select YPBPR input sources.
Press HDMI to select HDMI input sources.
Press DVD to select DVD input sources.
.
CHLIST/
AUDIOLIST/
22
22
23
24 26
25
27
33
28
31
32
35
34
29
30

Remote Control
Effective range
Note :
Installing the batteries in your remote control
Do not use caustic cleaners porcelain stainless steel toilet or oven cleaner etc( , , , , ...).
You may cause damage to your remote control.
Your remote control can be activated from up to the TV 5m away if pointed directly,
in front of the device.
1
2
3
Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.
Insert two AAA size batteries.
Make sure to match the and ends of(+) (-)
the batteries with the and ends indicated(+) (-)
in the battery compartment.
Align the lower tabs of the back cover to the
remote control and snap the cover into place.
PREPARATION
PREPARATION 12
5M
O
30
O
30

If the TV does not display any picture please check all the connections,.
Press the button to turn your TV on.POWER
Press the button to enter TV mode.INPUT
Press the button to change channel number+- ,
or use the buttons to select a channel.
CH /
09-&
–
Press the button to alternate back and forth
between the current and previous channel.
Press the button to adjust the volume.
Press the button to turn the sound off.
Press again to turn the sound on.
VOL +/-
MUTE
Press the button th display the information such
as the channel and channel label.
DISPLAY
1
2
3
4
5
6
Using the Features
13
USING THE FEATURES
USING THE FEATURES
USING THE FEATURES
13
5
2
1
3
6
3
5
4
Note:Select the menu language before operating the TV
(, ).see page 14 MENU LANGUAGE

First Time Installation
NOTE If this is the first time you run the LCD TV
the Initial Setup Menu will appear in the picture
and the items of this menu also exist in other
menus so you are able to change the values arter
you set them up
:,
,
,
.
Tuning Band
Init ial Se tup Menu
Auto Channel Search
Air
Menu Language English
To Move To Exit To S e l e c t
EN TE R MUEN
Menu language
Menu Operation
Basic operation
Initial Setup Menu
Tuning Band
Auto Channel Search
Press button then press botton to select the OSD language,.to select this item
Select mode Available tuning band mode()
If sets Air the range of channel is 2 69 and if sets Cable the range of channel is 1 135--
.:,
,,, .
Tuning Band Air cable
Note The OSD On Screen Display function enables you to adjust the screen status()
conveniently since it provides graphical presentation
:
.
Press button then press botton to enter the Auto
Channel Search Program.
,to select this item
ENTER
ENTER
15
USING THE FEATURES
USING THE FEATURES 12
14

TV Menu
Volume 50
Pi ct u re
So und
Chan n els
Se t ti ng s
Brightness
Sharpness
Contrast
Tint
Color
Picture Mode User
Advanced Video
50
50
50
50
50
Move
Picture
Menu E xi t
To Move To ExitTo S e l e ct
ENTER MUEN
Picture
Sound
Channels
Settings
Time Set
Closed Caption
Input Labels
Menu Setting
Parenta l Control Menu
Move
Set ti n g s
Menu Exit
Reset
To Move To ExitTo S e l e c t
ENTER MUEN
Picture
Sound
Channels
Settings
Balanc e
Audio Language 1
Advanced Audio
Audio Ch annel
5 Band Equalizer Mode User-
Audio Language 2
32
En gli sh
Stereo
Mo ve
Sound
Menu Exit
En gli sh
To Move To ExitTo Select
EN TE R M UEN
Picture
Sound
Channels
Settings
Aut o Channel Search
Channel Labels
Tuning Band Cable
Move
Channel
Menu Exit
Manual Add Channel
Manual Channel Set
Favorite Channels
To Move To ExitTo Select
ENTER MUEN
Volume adjustment
OSD Adjustment
OSD Adjustment
1 Press VOL button adjust the volume+/-..to
-Press MENU button display the main menu.to
Note The OSD On Screen Display in this document may be different from your TV s()
because this is just an reference for your product
:',
.
You can select the input sourse by pressing input button on
the remote conteol or on the front panel display the main
menu
.
.
to
-Press button select the available menus/.to
2 Press button mute the TVMUTE.,
.
to Press button again or button to
cancel the mute function
MUTE VOL+/-
Source List
CompLosite 1()AV
S video 2-()AV
Component AV3()
VGA PC AV4/( )
HDMI DVI A/(V5)
TV
To Move To Se lectEN TE R
USING THE FEATURES
USING THE FEATURES
15

TV Menu
PICTURE menu options
Press button on the front panel or the remote control to display
the main menu.
MENU
-
MENU EXIT/
.,
.
Press button repeatedly to adjust the
value After finishing your adjustment press
button to save and return back to the
previous
-button to selectPress menu
button to enter
PICTURE then
press
,
.
-button to
.
Press select the item you want to
adjust
Picture Mode
Select picture mode in menu Available picture mode Standard vivid bright user.( : , .)
You should set the picture mode to user first if you want to change the value of Contrast/
Brightness Colour Tint///
PICTURE ,,
""
.Sharpness
TIPS:
Contrast
Brightness
Color
Sharpness
Advanced Video
Gradient enable
3D Y C/
Noise reduction
Color Temperature
Tint
Press button and then use to adjust the contrast of the picture▲/▼ .to select this item,
Press button to select this item and then use to adjust the brightness of the picture.,
Press button and then use to adjust the colour .to select this item,
Press button and then press botton to adjust .,to select this item
Press button and then press botton to adjust .,to select this item
Press button and then press botton to enter .,to select this item
Press button and then press botton to,to select this item select on or off .
Press button and then press botton to,to select this item select on or off .
Press button and then press botton to select
(///).available noise reduction off low medium high
,,
:
to select this item
Press button and then press botton to select cool/
normal warm/.
,
.
to select this item
USING THE FEATURES
12
16
Picture
So un d
Channels
Settings
Brightn ess
Sharpness
Contrast
Tint
Color
Picture Mode Standard
Advanced Video
50
50
50
50
50
Move
Picture
OK Menu Exit
To Move To Exit
To S e l e c t
ENTER MUEN
You can select the picture mode directly by pressing button repeatedly.PMODE
Aspect Ratio
Press button and then
press botton to select available.(
aspect ratio normal zoom wide cinema )
,
:,,, .
to select this item
Picture
So un d
Channels
Settings
Move
Picture AdvancedVideo
OK Menu Exit
Color Temperature
3D Y C/
Noise Reduction
Aspect Ratio Normal
Gradient Enable
Blue Screen On
Norm al
On
Off
Off
To Move To ExitTo S e l e c t
ENTER MUEN
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Blue screen
Press button and then
press botton to select on or off .
,to select this item
ENTER
ENTER
ENTER

ENTER
SETUP TV Menu
SOUND menu options
Press button on the front panel or the remote control to display the main menu.MENU
USING THE FEATURES
USING THE FEATURES
USING THE FEATURES
17
Picture
Sound
Channels
Settings
Balance
Audio Language 1
Advanced Audio
Audio Channel
Equalizer Mode User
Audio Language 2
0
English
Stereo
Move
So un d
OK Menu Exit
English
To Move To ExitTo S e l e c t
ENTER MUEN
Equalizer mode
Press button and then press botton to select the sound
equalizer mode.
,to select this item
Press button and then press botton to adjust the sound balance .,.to select this item
Picture
So un d
Chann els
Settings
Sound Advanced Audio
5 Band Equalizer Set-
Audio Only
5 Band Equalizer o-n
To Move To ExitTo Select
EN TE R MUEN
Picture
So un d
Chann els
Settings
Move OK Menu Exit
5BandEqualizerSet-
120Hz
00000
500 Hz 1 5K Hz 5 KHz 10 KHz.
To Move To Exit
To Select
ENTER MUEN
5 band equalizer-
Audio only
/.press button to exitMENU EXIT
Press button adjust .to the value
Press button to adjust .to select the item you want
Press button and then press botton to enter .,to select this item
Press button then press botton to select .,to select this item
Note it only can be adjusted when the is selected:Equalizer Mode User"".
-
MENU EXIT/
.,
.
Press button repeatedly to adjust the
value After finishing your adjustment press
button to save and return back to the
previous menu
-button to selectSOUNDPress menu then
press button to enter
,
.ENTER
-/button to
.
Press select the item you want to▲▼
adjust
Audio channel
Advanced audio
Balance
Press button and then press botton to select available.(
audio channel mono stereo sap )
,
:, ,.
to select this item
Press button and then press botton to enter
.
,to select this item Advanced
audio mode.
ENTER
ENTER
ENTER
ENTER
ENTER
( )Available equalizer mode user standard movie music news:, , , , .

TV Menu
Channels menu options
Picture
So un d
Channels
Settings
Auto Channel Search
Channel Labels
Tuning Band Cable
Move
Channel
OK Menu Exit
Manual Add Channel
Manual Channel Set
Favorite Channels
To Move To Exit
To S e l e c t
ENTER MUEN
-
MENU EXIT/
.,
.
Press button repeatedly to adjust the
value After finishing your adjustment press
button to save and return back to the
previous menu
-button to select the channelsPress menu then
press button to enter
,
.ENTER
-button to
.
Press select the item you want to
adjust
Press button on the front of panel or the remote control to display the main menu.MENU
Tuning band
Auto channel search
Auto channel search
In DTV mode you can refer the strength of the
current channel and you can tune manually and
adjust the angle orientation of the antenna etc
,
,
,.
Press button then press botton to select or .Air Cable,to select this item
Press button then press botton to enter the
.
,to select this item Auto
channel scan program
Press button then press botton to enter the
.
manual
channel set
,to select this item
program
If sets air the range of channel is 2 69 and if sets cable the range of channel is 1 135--,,, .
ENTER
ENTER
ENTER
ENTER
Picture
Sound
Channels
Settings
Mo ve OK Menu Exit
Channels Auto Channel Search
0%
Digita 0 Analog 0
To Exit
MENU To E x i tMUEN
Picture
Sound
Channels
Settings
Move
Channels Manual Add Channel
OK Menu Exit
Channels Type
Signal Streng
Physical Cham
Now 0 Peak 24
2
Digital
To Move To ExitTo Sel ect
EN TE R MUEN
15
USING THE FEATURES
USING THE FEATURES 12
18

SETUP TV Menu
Manual channel set
Favorite channels
Channel labels
Channel labels
Press button then press botton to enter .,to select this item
Press button then press botton to enter the
.
,to select this item Favorite
channels program
Press button then press botton to enter,.to select this item
Press button ,.to select the position of letter then press button to set the name
Press buttonENTER .to perform your selection
Press button .to select skipped or viewable
Press button ,
,
.
to set the current channel to your favorite channel if the current
channel already be one of your favorite channel press button again will set it
to a normal channel
This function will add the channels not found before and will not delete the channels
unavallable at present
,
.
Picture
Sound
Channels
Settings
Channels List
Mo ve
Channels Manual Channel Set
OK Menu Exit
Ch 60-Viewable
Ch 71-Skipped
Ch 10 1 Viewable-
Ch 11 1 Skipped-
Ch 12 1 Viewable-
To Move To Exit To S e l e c t
ENTER MUEN
Picture
Sound
Channels
Settings
Favorite Channels
Mo ve
Channels Favorite Channels
OK Menu Exit
Ch 6 0-
Ch 7 1 KBS D--2
Ch 10 1 WCAU DT--
Ch 11 1 WPIX DT--
Ch 12 1 WPIX DT--
To Move To Exit
To S e l e c t
EN T E R MUEN
Channel Labels Menu
Ch 6 0-
To Move To Exit To Select
ENTER MUEN
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
14
USING THE FEATURES
USING THE FEATURES
19