MAJORITY FITZWILLIAM Manual

FTZ-ADT-SIL
Instructions Guide
FITZWILLIAM
INTERNET & DIGITAL RADIO SYSTEM

What’s in the Box?..................................................... 1
Controls And Funcons..............................................2
Support .................................................................... 6
Instrucons Guide .....................................................7
Navigaon Sengs ��������������������������������������������������� 7
Basic Operaon �������������������������������������������������������� 8
Connecng to WiFi ��������������������������������������������������10
Addional WiFi Connecon Sengs ������������������������11
Internet Radio ���������������������������������������������������������� 12
Spofy Connect (in applicable models) ������������������� 16
Music Player ������������������������������������������������������������ 17
DAB/DAB+ Radio ����������������������������������������������������� 19
FM Radio �����������������������������������������������������������������24
Bluetooth Mode ������������������������������������������������������28
AUX In Mode ������������������������������������������������������������29
Dual Alarm Seng �������������������������������������������������� 30
Sleep Timer Sengs ������������������������������������������������32
System Sengs �������������������������������������������������������33
Remote Control App ������������������������������������������������ 37
Troubleshoong ...................................................... 38
Specicaons .......................................................... 39
Warranty ................................................................. 39
Safety Informaon...................................................40
Contents
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
3YEAR
WARRANTY

1
What’s in the Box?
Box Contents
1. Majority Fitzwilliam
2. Remote Control
3. Power Adapter
4. Instructions Guide

2
Controls And Funcons
1. USB port 5V 1A
2. Headphone jack
3. Navigation/OK dial
4. Mode button
5. Memory button
6. Menu button
7. Back button
8. Display screen
9. Play/Pause button
10. Rewind button
11. Fastforward button
12. Info button
13. Power button/Volume dial
14. Remote control sensor
Front View (Control Panel)
MemoryMode Menu Back
Vol +
_
Info
Navigation
5V 1A
1
2
3 4
5 6
7 8 9 10 11 12 13
14

3
Controls And Funcons
Back View (Ports)
15. DC power input
16. W-LAN
17. Audio output
18. Analog audio input/output
19. Optical & Coaxial Output
20. LAN input
21. DAB/FM antenna
22. Bluetooth antenna
W-LAN
R
L
OUTPUT
AUDIO
OUTPUT
AUDIO DAB/FM
BLUETOOTH
ANALOG
AUDIO
DC IN
analog
input output
optical coaxial
LAN INPUT ANTENNA
ANTENNA
5.9V 2A
15 16 17 18 19 20 21 22

4
Controls And Funcons
Remote Control
Mode
Alarm Sleep
Menu
INFO
EQ Dimmer
VOL+
FAV
VOL-
ABC DEF
JKLGHI MNO
TUV
1
2
3
5
4
6
7
8
19
9
11
12
13
21
15
14
16
17
20
PQRSPQRS WXYZWXYZ
18
10 22

5
Controls and Funcons
1. Power/Standby
Press to switch between power
and standby mode
2. Dimmer button
Press repeatedly to switch
between four dimmer options
3. Equaliser button
4. Forward step button
In Bluetooth mode, use to go
forward a track.
5. Back step button
In Bluetooth mode, use to go
back a track.
6. Menu button
When on a mode, press button
to open menu settings
7. Up button
Navigate up
8. Left button
Navigate left
9. Vol - button
10. FAV button
Press and hold to open Preset
Store. Press button to open
Preset Recall.
11. Mute button
Switch between muting and
unmuting sound
12. Alarm button
Select to set an alarm on the
unit.
13. Sleep button
Press to set a sleep timer for
standby mode
14. Mode button
Select to open main menu
screen with available modes
15. Play/Pause button
Play and Pause media on
Bluetooth mode.
16. Back Step button
Use to go back a step in modes
and settings.
17. Right button
Navigate right
18. OK button
Press to conrm selections and
settings.
19. Down button
Navigate down
20. Vol+ button
21. 0-9 Number Selection
Use to navigate through presets
22. Info button
Press to view station information
in DAB and FM mode

6
Support
Support
Thank you for your purchase of the Majority Fitzwilliam.
Please follow the guidance of the manual to set up the
product and begin enjoying its features.
If you require further assistance with your new purchase,
please contact our support team on the Majority website:
https://www.majorityradios.co.uk/support

7
Instrucons Guide
Navigation Settings
Power/Volume dial: This should be used to turn your system on
and into Standby. To put into standby, press and hold the dial
(Ref.13) to display the time, date and any settings set such as
alarms.
To turn o standby, press down dial to be taken to the last
function that you were using before putting into standby.
When media is playing, twist dial to change the volume.
Navigation/OK dial: Rotate the dial clockwise or anticlockwise
to scroll through choices and press down the dial to conrm
selections.
Mode button: Press the Mode button to display available
modes to browse and select.
Menu button: Select the Menu button on the unit to enter
system menu setting options.
Info button: In Internet Radio, DAB/DAB+ or FM mode, select
the Info button repeatedly to scroll through available station
information.
Play/Pause, rewind and fastforward buttons: Use in particular
modes to skip backwards and forwards through media, as well
as pausing and playing.

8
Basic Operation
Instrucons Guide
Please note that the instructions within this manual will refer to the
system button number e.g (Ref.*X*) in accordance to the diagrams on
pages 2-3 or the remote (Rem.*X*) on pages 4-5.
Starting up your radio
Plug the adaptor connector into the back of the system labelled
‘DC in’ (Ref.) and turn the power on from the mains. The
system will begin to power up and display a ‘MAJORITY’ screen.
Ensure that the WLAN antenna and DAB/FM antennas are
screwed onto the unit via the WLAN port (Ref.) and DAB/FM
port (Ref.)
After this, a‘Setup Wizard’ will display with information. Press
down the ‘Navigation/OK’ dial (Ref.) or the OK button on the
remote (Rem.18) to conrm you have read the information.
Once conrmed, the screen will display “Start now?” Followed
by “Yes”or “No”. Highlight “Yes” with the Navigation dial or the
remote, and conrm start by pressing down the dial or the OK
button on the remote.
After this, conrm whether you would like the clock display
to be 12 or 24 hours. Highlight your chosen option with the
Navigation dial or the remote, and conrm choice by pressing
down the dial or the OK button on the remote.
Auto Update options will now display. This will give you the
choice for the clock to update through one of the available
modes: DAB, FM and Network, or no update. Highlight your
chosen option with the Navigation dial or the remote, and
conrm choice by pressing down the dial or the OK button on
the remote.

9
Instrucons Guide
“Set timezone” options will now display, so that the correct
time to your region will show on the unit. Scroll through the
available options with the Navigation dial or the remote, and
conrm choice by pressing down the dial or the OK button on
the remote.
Now choose between having Daylight savings switched on or
o. Highlight your chosen option with the Navigation dial or the
remote, and conrm choice by pressing down the dial or the OK
button on the remote.
Now select whether you would like to keep the network
connected, with Yes or No displaying as options. We would
advise selecting the “Yes” option for ease of use. Highlight your
chosen option with the Navigation dial or the remote, and
conrm choice by pressing down the dial or the OK button on
the remote.
The “Wlan Region” options will now display on the screen, with
options between ‘Europe’ and‘Australia’. Highlight your chosen
option with the Navigation dial or the remote, and conrm
choice by pressing down the dial or the OK button on the
remote.
The unit will now begin scanning for available networks. Once
scanned, the available networks will display for view. Scroll
through the available options with the Navigation dial or the
remote, and conrm your WiFi network by pressing down the
dial or the OK button on the remote. Follow the next page for
continued guidance on connecting to WiFi.
There are also options for “Rescan”, “Wired”or “Manual Cong”
that can be found on page 11.

10
Connecting to WiFi
Once the available networks display for view, scroll through the
available options with the Navigation dial (Ref.) or the remote,
and conrm your WiFi network by pressing down the dial or the
OK button on the remote (Rem.18).
Once on your chosen network, three options should display:
Push Button, PIN or Skip WPS.
WPS/PIN Setup:
If “Push Button” is selected, this will initiate a WPS search
connection to the WiFi. Whilst the Fitzwilliam is searching, select
the “WPS”button on your WiFi modem. This will connect your
WiFi to your radio without manually writing in the postcode.
If “PIN” is selected, a pin will display on the Fitzwilliam screen. If
your WiFi is capable of inserting a PIN, enter the code into your
WiFi network.
Manual Setup:
If “Skip WPS” is selected, you can manually enter in the WiFi
password on the Fitzwilliam with the Navigation dial or using
the navigation buttons on the remote control. Once your chosen
letter or number is displayed, conrm digit by pressing down the
dial or press the ‘OK’ button on the remote. Continue this process
until the WiFi password is displayed and conrm password by
navigating and selecting the “OK” option on the display screen.
To go back a digit, navigate and select the ‘BKSP’option.
Once connected, the screen will display “Connected”, followed
by displaying the available modes/settings in a list.
Instrucons Guide

11
Instrucons Guide
Additional WiFi Connection Settings
When available networks display on the unit, “Rescan”, “Wired” or
“Manual Cong” will also display as additional options for WiFi
connectivity.
Rescan
Select this option with the Navigation/OK dial (Ref.) or the OK
button on the remote (Rem.18) to initiate a rescan for available
WiFi networks.
Wired
Connect a LAN cable into your WiFi modem and connect into
the Fitzwilliam LAN socket (Ref.). This creates a direct network
connection to the unit.
Manual Conguration
The following options are available:
Wired (LAN) - DHCP Enable: Select Wired > DHCP Enable.
Wired (LAN) - DHCP Disable: Select Wired > DHCP Disable >
Enter network information such as IP address, subnet mask,
gateway address and DNS.
Wireless (WLAN) - DHCP Enable: Select Wireless > DHCP enable
> Enter SSID (network name). A network key may need to be
added.
Wireless (WLAN) - DHCP Disable: Assumes DHCP server is
active but network information such as IP address, subnet mask,
gateway address and DNS will need to be entered.

12
Internet Radio
Instrucons Guide
On rst setting up, a list of available modes will display. Select
“Internet Radio”from this list using the Navigation/OK dial
(Ref.) or the OK button (Rem.18). Alternatively, press the ‘Mode’
button on the unit (Ref.) or on the remote (Rem.14) repeatedly
to scroll through to Internet Radio mode.
Once on the ‘Internet Radio’mode, the following options will
display:
Last Listened
If internet radio has been accessed and listened to previously, a
list of previously listened to stations will display.
Station List
Select this option to browse through a range of internet radio
category options: My Favourites, Local United Kingdom, BBC,
Stations, Podcasts, My Added Stations and Help.
My Favourites - Stations can be added as a‘Favourite’via the
website www.wiradio-frontier.com. More information can be
found on this under the‘Help’ information on Page 13.
Local United Kingdom (or Chosen Location) - Depending on
the location set during the “Set Timezone”option on set up,
stations for that location will display and are seperated by genre.
There is also the option to explore All Stations.
BBC - Select this option to scroll through all available BBC
stations, including national and region specic stations.

13
Stations - Select option to access all available stations on the
radio and narrow down by Location, Genre, Popular Stations or
New Stations. You can also search for stations via this menu:
Search Stations - Manually type in a station with the
Navigation dial or using the navigation buttons on the remote.
Once your chosen letter or number is displayed, conrm
digit by pressing down the dial or press the ‘OK’ button on
the remote. Continue this process until the station name is
displayed and conrm by navigating and selecting the“OK”
option on the display screen.
Podcasts - Browse through a variety of podcasts by Location and
Genre. Search for a podcast by manually typing in the podcast
name.
My Added Stations - View information regarding Access Codes
below. Add stations manually to the unit via the website.
Help - Select this option for additional options such as getting
an access code and viewing frequently asked questions.
Access code - An access code is generated by the radio and
can be inputted into www.wiradio-frontier.com to register
your radio to the system. Once registered, create favourites
lists, manage favourites and add stations manually only to the
database if it is not available.
System Settings
Select this option to open System Settings for the unit. For
information on this, please refer from page 33 in the manual.
Main Menu
Press to view all available modes and setting options.
Instrucons Guide

14
Internet Radio: Preset Stations
Presetting a Radio Station
When you have found your desired station, hold down the
Memory button on the unit (Ref.) or the ‘FAV’ button on the
remote (Rem.10) for 2-3 seconds to go to the‘Save to Preset’
screen. Alternatively, if you want to save to preset number
1-10, press and hold the corresponding number on the remote
control for 2-3 seconds.
With the Navigation/OK dial (Ref.) or the remote, scroll through
the available preset numbers you can save the station to - ones
that have not got a station saved to them will display “[Not Set]”.
Once the preset number has been located that you wish to save
to, conrm your choice by pressing down the dial or the OK
button on the remote (Rem.18).
Once a station has been saved, the screen will display “Preset
Stored”to show that it has been stored successfully.
Recalling a Preset Radio Station
To view your preset favourite stations, press the ‘Memory’
button on the unit (Ref.) or the ‘FAV’ button on the remote
(Rem.10) to open ‘Recall from Preset’ settings. Do not hold
down the button as this will open preset store rather than preset
recall. Alternatively, recall preset numbers 1-10 by pressing the
corresponding number on the remote (do not hold).
When the ‘Recall from Preset’ options open, use the Navigation/
OK dial (Ref.) or the remote to scroll through the preset stations
saved. Once the chosen station you wish to play has been found,
conrm your choice by pressing down the dial or the OK button
on the remote (Rem.18).
Instrucons Guide

15
Internet Radio: Station Information
Instrucons Guide
Station information can be displayed by the station broadcaster
which is able to be viewed when listening to particular stations.
If the station is broadcasting information, the‘Info’ button on
the unit (Ref.) or on the remote (Rem.22) can be pressed
repeatedly to scroll through the following information:
Programme Information - Displays artist and song currently
being played on the station.
Description - Shows the type and description of the programme
provided by the station.
Genre and Show Country - Genre of the station and where it is
available.
Reliability - Reliability of signal strength
Bit Rate, Codec and Sampling Rate - The data rate which the
signal is being transmitted.
Playback Buer - Displays the speed of station buering
Today’s Date - Displays the date information provided by the
broadcaster.

16
Spotify Connect (in applicable models)
Please note that this is only compatible in applicable
models.
Listen out loud with Spotify Connect
1. Connect your Majority Fitzwilliam to your wi network
2. Open up the Spotify app on your phone, tablet or laptop using
the same wi network
3. Play a song and select Devices Available.
4. Select your Majority Fitzwilliam and start listening.
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses.
Instrucons Guide

17
Music Player
Press the ‘Mode’button on the unit (Ref.) or on the remote (Rem.)
repeatedly to scroll through to Music Player mode.
USB Playback:
Select USB mode and plug in a USB stick (Ref.) with les.
Conrm the device and highlight the desired folder/song with
the Navigation/OK dial (Ref.) or the navigation buttons on the
remote and select the OK button (Rem.) for your chosen song to
play.
Please ensure that the USB stick is formatted as FAT16 or FAT32.
Shared Media:
Universal Plug and Play allows you to connect to other devices
to play your music such as personal computers (Windows media
player), mobile (GooglePlay) and other devices.
Go to your computer or mobile and connect to the Fitzwilliam.
Go to Control Panel > Network and Internet > View network
computers and devices. Choose the Fitwilliam from your chosen
device.
Go to the Fitzwilliam and select the device (home server, PC etc)
that you wish to connect to and press the OK button to open
shared folders on that device.
Both your device and the Fitzwilliam system will need to be
connected to the same WiFi network.
If you have set up folders on your device that is being shared you
can use the Navigation/OK dial to scroll through your choices
and conrm your selection by pressing down the OK button.
Instrucons Guide

18
Instrucons Guide
My Playlist:
You can create local playlist on the radio from ’Shared Media’and
the ‘USB Playback’ settings.
On ‘Shared Media’or ‘USB Playback’ settings, choose the le to be
added to the playlist. Press and hold the Navigation/OK dial or
OK button on the remote for approximately 3seconds until the
display shows“Added to Playlist”.
You can also use playlists that were created on your windows PC.
To remove les from the playlist, choose the le and then press
and hold down the Navigation/OK dial for 3 seconds. The screen
will then display “Delete from My Playlist?”and conrm the
delete by selecting “YES”.
Repeat Play:
Select multiple times to switch between ON and OFF for
repetition of the playlist.
Shue Play:
Select multiple times to switch between ON and OFF for shue
of your playlist.
Clear My Playlist:
Select this option to clear the whole playlist saved in“My Playlist”
Prune Servers:
Reset the list of servers connected to by selecting “YES” in these
settings.