MAKS MAKS KEYPAD MINI User manual

Keypad usage
Enter the user code and select an action by clicking the appropriate
button: (Arming), (Disarming) or (Partially arming).
After the first digit of the code is pressed, LED indicators will be activated.
Erroneous digits can be reset with the ("Cancel") button.
To change your code, press and hold the OK button it until beep.
Press key 4 and enter your current code and then enter the new code twice.
To view the indication press OK key to activate the keypad.
ISM wireless interface, up to 2000 m 868.0... 868.6 MHz
secure two-way communication
key - 256 bits
Power
(alkaline batteries included)
two AAA batteries
(LR03) 1.5V
consumption in standby mode
not more than 30 µA
consumption in active mode
not more than 35 µA
service life of battery
up to 2 years
For more information on setting up and operating the
device, please visit www.maks.systems
The wireless keypad is designed for arming and disarming, displaying
alarms and device status, as well as interaction with the user of the alarm
system.
The keypad has the reader of contactless active identifiers MAKS TAG
which allows authorization in the hands-free mode near the keypad.
Radio communication
Keypad transceiver operates in several channels of 868.0 ... 868.6 MHz
band for redundancy.
Secure two-way radio communication.
Distance - up to 2000 m in the open space.
Three grades of power, maximum - up to 20 mW.
WIRELESS MINI KEYPAD
• ergonomic miniature keypad
• elegant design, slim profile
• available in two colors
• security modes management
• hands-free identification
• numeric keys
• 868,0 ... 868.6MHz, several channels for redundancy,
range up to 2000 m
• two AAA batteries (LR03)
• up to two years’ service life
• easy and fast installation
Characteristics
Setting
The keypad operates only with the MAKS PRO wireless
security center, connection to other systems is not provided.
The keypad connects to the security center and
is configured using the MAKS SETUP mobile application.
Case color
white, black
84.5 x 84.5 x 14.6 mm
Weight
75 grams
Operating temperature range
from -10°C to +55°C
Dimensions
To arm: go to the keypad with the MAKS TAG. Activate the keypad
by pressing the "OK" button, the user will be authorized.
Then select an action by pressing the corresponding button: (Arming)
or (Partial arming).
To disarm: after entering the door equipped with MAKS WDC, the keypad
will be activated automatically, otherwise activate the keypad by pressing
the "OK" button.
The user who approaches the keypad with the MAKS TAG will be
authorized.
Just press the “Disarm” button to disarm the device.
Using MAKS TAG
Batteries
Alkaline batteries (LR03, alkaline)
Salt batteries (R03)
Do not use!
Lithium batteries (FR03)
Usage allowed
Included
The device uses AAA batteries

Functional parts of the device
WWW.MAKS.SYSTEMS
1. Keyboard case
2. Numeric keypad
3. Keyboard case, rear view
4. Tamper contact
5. Batteries
6. On/Off switch
7. Keypad plate
8. " Partial Arming" button ("Stay"
or "Night Mode")
Selecting the installation location
Carefully select the installation location for the MAKS Keypad mini.
The device cannot be placed:
1. Outdoors or in areas with unacceptable humidity and temperature
2. In places with a high level of radio interference
3. Near objects that can cause radio signal attenuation or shield-
ing (metal, mirrors, etc.)
4. At a distance of less than 1 m from the security center
Installation and connection
1. Use a plastic card to remove
the device from the plate
2. Insert the card into the slot
3. Press down on the fixation
elements with the card
4. Move the keypad up
5. Remove the MAKS Keypad mini
from the back plate
6. Fit the rear plate 7using the
supplied screws and wall plugs.
7. Place the device on the rear plate 7
and slide it down to fix it and lock
the tamper contact 4. Flashes on indicator 15
will confirm that the tamper is locked
Registration and setup
1. Place the detector at a distance of no more than 2 m from the MAKS
PRO security center. Registration is run at on lowest possible power to
avoid the influence of neighboring systems, which can be being set up
nearby
2. Run the MAKS SETUP application
3. Follow the instructions of the application to connect to the MAKS PRO
and start the registration of MAKS wireless devices
4. Turn on the MAKS Keypad mini, after 10-20 seconds it will be registered
5. Set up a new device in your mobile application
Switching on and off
Set switch 6to "ON" to turn on the device. If the device is registered in
MAKS PRO, it switches to standby mode. If the device has not been
registered, it will go into sleep mode after 30 seconds.
To turn off the device, set switch 6to "OFF"
Before installing the MAKS Keypad mini, register it with MAKS PRO and
test the keyboard signal level using the MAKS SETUP app.
We recommend to install the keypad in the following order:
1. Selecting the installation location with the best signal
2. Installation of the back plate
3. Keypad installation
Keypad installation
Battery replacement
1. Use a plastic card to remove the device from the mount
2. Pull out and replace the batteries
3. Place the keypad on the back plate and slide it down until it locks
9. "Partial Arming" LED indicator
10. "Arming" button
11. "Arming" indicator
12. “Disarming” button
13. "Ready" LED indicator
14. "Info" button with reprogramming capability
15 "Info" LED indicator
16. "Cancel" button
17. "OK" button - additional actions
Indication
Disarmed - "Arming" and "Partial Arming" indicators are
switched off
“Stay” armed - “Partial Arming” indicator is red
Arming - "Arming" indicator is on
Entry delay - "Ready" indicator flashes green, keypad emits short
beeps
Not ready for arming - "Ready" indicator is orange
Ready for arming - "Ready" indicator is green
Exit delay - "Ready" indicator flashes green, keypad emits short beeps
Alarm - "Arming" and "Partial Arming" indicators flash red
User is authorized, there are troubles - "Info" indicator is yellow
User not authorized yet - "Info" indicator flashes yellow
1
3
8
9
10
11
12
13
14
15 16 17
7
5 64
2