Alarm Lock T3 User manual

T3 Keypad Programming – Cheat Sheet
Factory Code = 123456
1. Enter Program Mode(wait for Green light, before pressing AL button)
1 2 3 4 5 6 AL
All programming functions are performed while the lock is in program mode.
2. Change Factory Code to New Master Code (Must be 6 digits)
AL1 ALAL*
(Enter Master Code) (Re Enter Master Code)
3. Enter DTM Door Address
AL59 AL*
(Door # 1-48)
4. Enter DTM User Code
AL2 AL299 AL*
(Enter User code 3–6 digits)
5. Enter Date
AL38 AL*
(Enter Month Day Year- Use MMDDYY)
6. Enter Time
AL39 AL*
(Enter Military Time)
7. Enter Day of Week
AL40 AL*
(Enter 1 – 7, 1 = Sun, 7 = Sat)
8. Add New Users
AL2 ALAL*
(User ID #) (Enter User code 3–6 digits)
9. User Enable with Timeout
AL5 ALAL*
(User ID #) (1-999 hours)
10. Passage Mode
AL45 *
11. Re-Lock Mode
AL46 *
12. Business Quick Schedule (7am – 5pm, Mon-Fri)
AL84 AL*
13. Day Quick Schedule (7am – 5pm,All Days)
AL85 AL*
14. Evening Quick Schedule (3pm – 11pm,All days)
AL84 AL*
15. Night Quick Schedule (11pm – 9am, All days)
AL84 AL*
(Group #)
16. Print Audit Trail IR1
AL55 *