Man & Machine EasyConnect GPS User manual

For safety and regulatory information, see page 2 of this guide.
EasyConnect GPS
GPS/USB/Ethernet Module
for Motion®C5 and F5 Tablet PCs
Installation and User’s Guide
IMPORTANT: Safety and Regulatory Information
¡ Tu Sitio de Automatización !

Safety and Regulatory information
Operational Ratings of this device is recommended at temperature ranges
of:
Operational temperature: 5 - 40˚ C
Non-operational temperature (storage): -20 - 60˚ C
Operational relative humidity: 20 - 80%
Non-operational relative humidity (storage): 10 - 90%
Operational air pressure: 697 - 1060 hPa
Non-operational air pressure: 187 - 1060 hPa
Product safety information
This device is designed to optimize safety, minimize strain, and withstand the
rigors of portability. However, to further reduce the risk of personal injury or
damage to the unit, certain precautions should be observed.
 Do not operate this device near water, for example, near a bathtub, kitchen
sink or laundry tub, in a wet basement, by a swimming pool, or in the rain. This
device oered by Man & Machine, Inc. is not designed to be to be water
resistant nor water tight.
 Do not connect or disconnect any cables or perform maintenance or
reconguration of this product during an electrical storm.
 Avoid using the wired LAN during an electrical storm, as a remote risk of
electrical shock from lightning exists.
Comfort and Health
HEALTH WARNING: Long term use of any electronic device may be
linked to serious injuries or disorders. For further information, visit the
My Clinic website at www.myoclinic.org. You may help prevent the
occasional discomfort in your hands, arms, shoulders, neck, and other parts of
your body by:
 Taking frequent breaks to stretch and change your working position.
 Resting your hands and wrists frequently so they have time to recover from
repetitive movements. Use a wrist pad.
 DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED
HEALTH PROFESSIONAL.
United States - Federal Communications Commission Notice
Electromagnetic Interference (EMI) is any electromagnetic disturbance
that interrupts, obstructs, or otherwise degrades or limits the eective
performance of electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with authorized electronic
emissions, which may include television, AM/FM broadcasts, cellular services,
radar, air-trac control, and pagers.
 Class A is for business or industrial environments.
 Class B is for residential environments.
This device complies with Part 15 of the Federal Communications Commission
(FCC) Rules. Operation is subject to the following two conditions:
 This device may not cause harmful interference.
 This device must accept any interference received, including interference
that may cause undesired operation.
Class A Equipment: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual,
may cause interference with radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which
case you will be required to correct the interference at your own expense.
Class B Equipment: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
notinstalled and used in accordance with the manufacturer’s instruction manual,
may cause interference with radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, you are
encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna
 Increase the separation between the equipment and the receiver
 Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
 Consult the dealer or an experienced radio/television technician
for help
This device meets the following Technical and Safety Standards for the United
States:
 FCC Part 15 Subpart B, Class B - Limits and Methods of Measurement of
Radio Interference Characteristics of Information Technology
 UL. 60950-1 - Safety of Information Technology Equipment
The following information is provided on the device or devices covered in this
document in compliance with FCC regulations:
 Model Number: USBAR Module
 Company name: Man & Machine, Inc.
 Address: 3706 West Street
 State: Landover, MD 20785
 Phone: [phone]
IC Notice (Canada Only)
Unintentional Emitter per ICES-003
This device is classied by the Industry Canada as (IC) Interference-Causing
Equipment Standard #3 (ICES-003) as Class B digital devices. This classication is
located on the label on the back of the device. Look for a statement on the label
similar to the following: Canada ICES-003, Class/Classe B.
This Class B (or Class A, if so indicated on the registration label) digital apparatus
meets the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette
d’enregistration) respecte toutes les exigences du Règlement sur le Matériel
Brouilleur du Canada.
This device meets the following Technical and Safety Standards for the Industry
Canada:
 ICES-003, Class/Classe B - Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
 CSA C22.2 No. 60950-1 - Safety of Information Technology Equipment
Conformité Européne (CE) (European Union)
Unintentional Emitter
The (Conformité Européne) symbol found on the device indicates
compliance to the EMC Directive and the Low Voltage Directive of the
European Union.
This means that the device meets the following technical standards:
 EN 55022 (CISPR22) — Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
 EN 55024 (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8, 4-11) — Information
Technology Equipment-Immunity Characteristics - Limits and Methods of
Measurement
 EN 61000 3-2 (IEC 61000 3-2) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 2: Limitations for harmonic current emissions (Equipment input
current up to and including 16 A per phase)
 EN 61000 3-3 (IEC 61000 3-3) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 3: Limitations of voltage uctuations and icker in low-voltage
supply systems for equipment with rated current up to and including 16 A
 IEC/EN 60950-1 — Safety of Information Technology Equipment
Australia Radio Communications (C-Tick) Statement
The C-Tick symbol found on the device indicates compliance to the
technical and safety standards set forth by the Australian Communica
tions and Media Authority (ACMA).
This symbol indicates the device meets compliance to the technical and safety
standards set forth by the Australian Communications and Media Authority
(ACMA).
This device meets the following Technical and Safety Standards for the
Australian / New Zealand regions:
 AS/NZS 3548 Class B - Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
 AS/NZS 60950-1 – Safety of Information Technology and Electronic Business
Machines
 CISPR 22 – Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment
 CISPR 24 – Limits and Methods of Measurement Characteristics of
Information Technology Equipment
Canada ICES-003, Class/Classe B
Page 2
¡ Tu Sitio de Automatización !

Installing USB devices
Installing the EasyConnect GPS Module
Align the two pins on the module with the
pin holes on the tablet.
2a
1
Insert the connector end of the USB device into the
USB port on the module.
Removing the EasyConnect GPS Module
Installing USB devices
Installing Ethernet Cable
Gently push the module onto the tablet until
the module snaps into the docked position.
2b
Module in the docked position.
Place your nger behind the top edge of the module
and pull the module away from the tablet.
Page 3
Install the GPS driver
Go to www.man-machine.com/GPS.htm and
download and install the GPS Driver.
Identify the COM port used by the GPS
To indentify the COM Port, go to the Device
Manager, expand Ports (COM & LPT), and nd the
COM Port number assigned to Prolic USB-to-Serial
GPS Port.
(To nd Device Manager, go to Start, right click on
My Computer, click Properties, select the Hardware
tab and click Device Manager.)
Launch the GPS Software
Run the GPS software application. Change the
COM port to the assigned port number and use
Baudrate 38400.
Insert the Ethernet cable connector into
the Ehternet port on the module.
Using the GPS