S
S
Sl
l
li
i
im
m
m
C
C
Co
o
oo
o
ol
l
l
K
K
Ke
e
ey
y
yb
b
bo
o
oa
a
ar
r
rd
d
d
The Slim Cool is a 12-inch wide waterproof and contaminant proof
keyboard with tactile feedback keys. The sealed and rigid surface is
ideal for industrial, marine, and medical use, as well as other
applications where moisture, cleaning, and durability are a
consideration. Because the Slim Cool is also uieter than "standard"
keyboards, they are great for applications where noise generated from
“key-clicks” is a problem. The Slim Cool is compatible with standard
keyboard layouts and drivers are not needed.
Weight:
600 g (1.3 lb.)
Dimensions:
295.0 mm x 140.0 mm x 15.0 mm
11.6” x 5.5” x 0.6”
Cable length:
1.83 m (6’)
Storage temperature:
-20 °C - 70 °C
-4 ° F - 158 °F
Operating temperature:
0 °C - 70 °C
32 °F – 158 ° F
Voltage:
5 Volt
Current input:
26 mA
Composition:
100% Silicone Rubber
PVC Cable
100% Latex free
System requirements:
USB interface
PS/2 interface
(USB to PS/2 Adapter Not Included)
Number of keys:
86 US Layout keys. This keyboard
does not have a keypad.
Warranty period:
Limited lifetime warranty
Specifications subject to change
without notice
Installing our Slim Cool Keyboard
USB: Attach the keyboard cable to a USB computer port. (You do not have to
turn off your computer. There is no software to install.)
PS2: Turn off your computer before attaching devices. If you have another
keyboard attached, disconnect it. Attach the PS2 keyboard Adapter (sold
separately) to USB cable connector. Attach cable to the keyboard port.
Turn on your computer to activate the keyboard. (There is no software to
install.)
You can email us at: info@mmimd.com
or call us at: (301) 341-4900
In Europe, contact +31-23-5450185
www.man-machine.com
Cleaning Instructions for Waterproof Keyboards and Mice:
1
1.
.
Clean the surface of the product by wiping, brushing, spraying or
dipping it. Use only rags, sponges or soft bristle brushes.
DO NOT place the USB or PS/2 connector into the fluid.
2
2.
.
Either wipe with dry cloth or allow to air dry.
Disinfectants recommended by Man & Machine, Inc.:
• Chlorine based (max 10% solution) – Chlorox, Novalsan, etc.
• Formaldehyde based - Formaldehyde Solution 37%, Vinco
Formaldegen, etc.
• Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc.
• Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc.
•
Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc.
• Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc.
• Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc.
• Soap and water
DO NOT USE:
• Petroleum based cleaning fluids, such as Gasoline
• Acetone
• Over 10% bleach solutions
• Temperature or pressure sterilization
•
Buffing pads or scrubbing pads
THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED TO
ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT. MAN &
MACHINE, INC. OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY
RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY
QUESTIONS, PLEASE CONTACT PLACE OF PURCHASE OR MMI PRIOR TO
CLEANING.
Copyright Man & Machine, Inc. 2007
