Man & Machine Very Cool User manual

Part functions: (See gure A.)
1 Keyboard lock
2 Quick disconnect cable: Keyboard cable can be removed from the
USB extension cable port to disconnect the keyboard.
Installation: (See gure B.)
No software required for installation. Quick disconnect cable can be
positioned in 4 directions (left, right, back and hang straight down).
(See gure C.) Optional extension cable included.
Cleaning Instructions
Press the Fn key and F11 key simultaneously to lock the keyboard. The
three LED’s blink when the keyboard is in lock mode. Clean keyboard
with approved cleaning method and approved disinfectant or soap and
water. After cleaning is done, press Fn key and F11 key simultaneously
again to unlock the keyboard.
Approved cleaning methods keyboard
• You can wipe the keyboard with a soft cloth that is non-abrasive like
a microber cloth, a disinfecting wipe, a soft brush similar to a paint
brush in bristle stiffness or a sponge, but not a scourer of any sort.
• You can spray the keyboard with soap and water or an approved
disinfectant.
• You can rinse the keyboard with soap and water or an approved
disinfectant.
Approved cleaning methods drape
• You can wipe, spray or rinse the drape as described under
“Approved cleaning methods keyboard“.
• You can immerse the product in soap and water or an approved
disinfectant.
• You can expose the drape to Hydrogen Peroxide Vapour (HPV).
• You can sterilize the drape in an autoclave or thermo disinfector (up
to 134 ºC, tested 200 cycles).
Approved disinfectants
• Chlorine based, up to 100,000 ppm (10%) bleach content
• Alcohol based
• Glutaraldehyde based
• Phenol based
• Formaldehyde based, up to 370,000 ppm (37%) formaldehyde content
• Oxidizing, such as Hydrogen Peroxide, up to 30,000 (3%) ppm content
• Quaternary Ammonium, up to 20,000 ppm (2%) content.
Restrictions
• Only clean using the cleaning methods and disinfectants described
under cleaning instructions in this manual.
• Please note that the keyboard must not be immersed in liquid and
the USB connector must not be exposed to any liquid.
• Always follow the instructions provided by the cleaning product
manufacturer.
• Do not use petroleum based cleaning uids, Acetone or abrasive
cleaning aids and products.
• Do not use temperature or pressure sterilization on the keyboard.
.................................................................................
PS/2
USB
B A
Very Cool Flat
(Replacement drapes sold separately)
Very Cool FlatVery Cool
• Operating Manual
Very Cool
2
C
VENDOR:
SCALE : Not TOLERANCE : N/A UNIT : PAGE: 1 OF 1
PART NUMBER : DRAPE/VC/USINT
DESCRIPTIONS :
DOC NO.: Very Cool US International Top Layout
DRAWN/MODIFIED BY CHECKED & APPROVED BY DATE REV
T.R. T. R.
Very Cool Keyboard US International Top Layout 03/06/19 A
VENDOR P/N
C
C
1 2

Man & Machine, Inc. (“Manufacturer”) warrants to the original
purchaser (the “Customer”) that the products it manufactures
(“Product”) shall be free from defects in materials and workmanship
at the time of shipment. Manufacturer’s sole obligation under this
Warranty shall be limited to repairing or replacing with the same or
comparable item, at its option, free of charge, any product returned to
Manufacturer freight prepaid that is deemed to have failed under
Manufacturer’s warranty. Manufacturer shall have no obligation under
this Warranty or otherwise if (1) the Product has been damaged by
abuse, negligence, accident, mishandling, lightning or ood, or other
natural disasters, (2) the Product has been affected by normal wear
and tear, (3) the Product has not been operated in accordance with
its operating instructions, (4) the Product has been altered or repaired
by anyone outside Manufacturer (5) adaptations or accessories have
been made or attached to the Product which, in Manufacturer’s sole
determination, have adversely affected its performance, safety or
reliability. If a Product should malfunction or fail during the warranty
period, contact the original place of purchase for return options.
If purchased directly from Man & Machine, Inc., please submit a
Return Material Authorization (RMA). This form can be located on our
website at http://www.man-machine.com/returnsreplacements/.
Please complete requested information and provide a detailed
description of the problem. Returned Products must include the RMA
number clearly marked on the outside of the package. Manufacturer
will not be responsible for any unnecessary items included with any
returned Product.
.................................................................................
This warranty is the exclusive warranty for any product. Manufacturer
specically disclaims any and all other warranties of any kind, express
or implied, including any warranties of tness for a particular purpose or
of merchantability. Manufacturer shall not be liable in tort, including
negligence or strict liability, and shall have no liability at all for injury
to persons or property. Manufacturer’s liability for failure to fulll its
obligation under this limited warranty or any other liability in connection
with a product shall be limited to the amount of the purchase price received
by manufacturer for the product. The remedies stated in this limited
warranty are the customer’s exclusive remedies against manufacturer
regarding any product. Under no circumstances shall manufacturer be
liable for any indirect, incidental, special or consequential damages,
including lost prots and revenues, inconvenience or interruptions in
operations, or any other commercial or economic losses of any kind.
These limitations and disclaimers are not made by manufacturer where
prohibited by law. Some states prohibit limitations of warranties and the
customer may have additional rights in those states.
.................................................................................
All items returned for warranty repair/replacement must be sent
freight prepaid and insured to either the original place of purchase
or to the Manufacturer, referencing a valid RMA number:
USA & OTHER COUNTRIES EUROPE
Man & Machine, Inc. Man & Machine Europe
3706 West Street Tappersweg 10c
Landover, MD 20785 2031 ET Haarlem
All warranty repairs or replacements will be returned freight prepaid by
ground service to any destination within the Continental United States
and Europe. Charges for repairs/replacements shipped back outside
this region are the responsibility of the end user.
Products must be cleaned/sanitized before returning. Returns will not
be accepted that have not been disinfected.
USA & OTHER COUNTRIES EUROPE
1 Year limited warranty 1 Year limited warranty
For current warranty information, visit our website at
http://www.man-machine.com/warranty-statement/
• Product warranty statement
USA:
[email protected]
[phone]
Europe:
[email protected]
[phone]
UK:
[email protected]
[phone]
www.man-machine.com
The Windows logo is a trademark or registered
trademark of Microsoft Corporation in the
United States and/or other countries.
Copyright Man & Machine, Inc. 2018
rev. 1.1
THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED TO ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT. MAN & MACHINE, INC.
OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY QUESTIONS, PLEASE CONTACT PLACE OF
PURCHASE OR MMI PRIOR TO CLEANING.