Manhattan 100007 User manual

UNIVERSAL
POWER PLUG
ADAPTER
QUICK
INSTALL GUIDE
MODEL 100007
Thank you for purchasing the
MANHATTAN®Universal Power
Plug Adapter, Model 100007.
Safe, reliable and easy to use, its
all-in-one design adapts plugs for
use in most international power
outlets, eliminating the annoyance
of tangled cords and loose adapters
that are easily lost when traveling.
MH-100007-QIG-0809-01
See reverse
for Selector
instructions
Selector slides
easily to the
proper local
setting (as
shown on back
of this sheet)
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
MANHATTAN®offers a complete line of PC Components, Peripherals, Cables and
Accessories. Ask your local computer dealer for more information or visit us online at
www.manhattan-products.com
SPECIFICATIONS
Electrical
• Power rating: 15 A 125 VAC /
10 A 250 VAC (does not
convert voltage)
• Surge protection: 150 Joules
• Max. clamping voltage: 775 V
• Max. spike: 6000 V / 4500 A
Standards & Certications
• CE, EMC
Connections
• Europe, North & South America,
Australia, U.K. power plugs
(male)
• Universal power plug (female)
Physical
• Plastic housing
• LED surge indicator
• 8 x 4.5 x 4.0 cm (3 x 1.7 x 1.5 in.)
• 105 g (3.7 oz.)
Suitable for most consumer electronics.
Does not reduce or convert electrical voltage;
not recommended for use with high-wattage
devices. Check device specs before use.
•Built-in over-temperature,
overload, short-circuit
and surge protection
•Rated to handle both 110-
and 220–240-volt standards
•Lifetime Warranty
Safety switches lock the
retractable plugs in place
for use and travel

To use the Universal Power Plug Adapter, you rst need to set
the adapter’s plug to the proper setting for the region in which
you are using the adapter. The adapter’s safety feature then
temporarily locks out the alternate plug settings.
To set the adapter, hold it with the center selection switch facing
you so you can read the settings. Then, move the switch to the
proper position for your region, as indicated by the diagrams
below. After setting the adapter, you can plug it into an available
power outlet and connect your device to the adapter.
North & South America (USA / AUS / NZ setting):
Slide the selector to the left, then move the safety
switch on the right toward you so the UK/European
plugs will be locked out by the safety feature.
Australia & New Zealand (USA / AUS / NZ setting):
Slide the selector to the left, then move the safety switch
on the right toward you and swivel the pins so the UK/
European plugs will be locked out by the safety feature.
United Kingdom (UK setting):
Slide the selector to the right, then move the safety
switch on the left toward you so the US/European
plugs will be locked out by the safety feature. Pull
out the ground prong as shown.
Europe (EUROPE setting):
Slide the selector to the center, then rotate the plug
out so the US/UK plugs will be locked out by the
safety feature.