Manhattan 179089 User manual

HI-SPEED
USB 2.0 TO
SATA 150
ADAPTER
WITH POWER SUPPLY
USER
MANUAL
Model 179089
MAN-179089-UM-0208-03

Thank you for purchasing the MANHATTAN
®
Hi-Speed USB 2.0 to SATA
150 Adapter with Power Supply, Model 179089.
This convenient device connects external SATA storage devices to
desktop and notebook computers using a USB port so that backing up
les or storing large le archives on external drives is faster and easier
to accomplish.
Installation of the adapter is quick and simple, so you’ll soon be enjoying
the benets of these features:
• Supports data transfer SATA 150 speeds up to 1.5 Gbps and Hi-Speed
USB 2.0 speeds up to 480 Mbps
• Supports 48-bit LBA for drives up to 750 GB
• Fits SATA 150 and CD/DVD drives up to 5.25”
• Plug and Play; hot-swappable; Windows, Mac and Linux compatible
• Lifetime Warranty
INSTALLATION
NOTE: Do not store or operate this device in conditions of excessive heat
or humidity. If the initial installation attempt fails, go to My Computer →
Control Panel →System Properties → Device Manager and remove any
items tagged with a question mark (?) or exclamation point (!).
1. Plug in the power supply and connect it to the SATA device with the
4-pin/15-pin cable.
2. Connect the Hi-Speed USB 2.0 to SATA 150 Adapter to the SATA
device using the SATA data cable, then plug the adapter into the
computer’s USB port.
3. Windows will detect a new device and automatically install the driver
(no added software is needed).
• To verify the connection, go to My Computer → Control Panel →
System Properties → Device Manager. Open “Hard disk controllers”
to display the newly added hard disk drive.
• If connecting to a brand new hard disk drive, use “Fdisk” to set its
capacity. NOTE: This will destroy any data on the HDD. Back up any
data on the drive rst if it needs to be saved.
2

• Format the HDD using standard procedures. If its icon appears on the
desktop but you can’t nd it listed, check/conrm that: the HDD has
been properly installed; the correct driver for this HDD is installed.
SPECIFICATIONS
Standards and Certications
• Hi-Speed USB 2.0
• USB 1.1
• SATA 1.0a
• FCC
• CE
General
• Hi-Speed USB 2.0 type A male; eSATA connection 7-pin female ports
• Hi-Speed USB 2.0 transfer interface
• 480 Mbps maximum transfer rate
• Supports SATA and external SATA drives
• Chipset: SPIF215A
Power Supply
• Input 100 – 250 V AC; 50/60 Hz maximum, 0.5 A
• Output: 5 V / 2 A; 12 V / 2 A
Physical
• 4.8 x 2.7 x 1.25 cm (1.9 x 1.1 x 0.5 in.)
• Cables: eSATA, 20 cm (8 in.); power, 1.7 m (67 in.)
• Weight: 275 g (9.7 oz.) with power supply
System Requirements
• Windows 2000/XP/Vista, Mac OS 10, Linux
Package Contents
• Hi-Speed USB 2.0 to SATA 150 Adapter with Power Supply
• eSATA cable
• User manual
3

Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at