MANOR BROOK MB 98264 User manual

USE AND CARE GUIDE
TWIGS 1 LIGHT WALL SCONCE
Questions, problems, missing parts? Before returning to the store,
call Manor Brook Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
904-642-4340
THANK YOU
We appreciate the trust and confidence you have placed in Manor Brook through the purchase of this light fixture. We strive to continually create
quality products designed to enhance your home.
Thank you for choosing us!
Model # MB 98264

Table of Contents
Safety Information .................................................... 2 Assembly ..................................................................... 5
Warranty ................................................................... 2 Installation ................................................................... 5, 6
Pre-Installation .......................................................... 3 Care and Cleaning ....................................................... 7
Planning Installation ............................................ 3 Troubleshooting ........................................................... 7
Tools Required ..................................................... 3
Hardware Included ............................................... 3
Package Contents ................................................. 4
Safety Information
Consult a qualified electrician with any
electrical questions you may have.
Warranty
1-YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in the materials and workmanship for a period
of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use. If this product is found to be defective, the manufacturer's only obligation, and your
exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
This warranty shall not apply to any product that is found to have been improperly installed, assembled, or used in
any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure
of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure
not relating to faulty material or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the finish on any portion of the product due to weathering, as this is considered
normal wear. The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or
implied, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not
be liable for any consequential or incidental loss or damage, including but not limited to, any labor or expense costs
involved in the replacement or repair of the product.
Contact the Customer Service Team at 904-642-4340.
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
continue the assembly process. Please call our Customer
Service Team at 904-642-4340.
2

Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or
cardboard. Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
3
Part
AA
BB
CC
DD
Description
Cross bar
Wire nut
Outlet box screw
Ground screw
Quantity
3
1
2
1
Safety
goggles
Wire
strippers Wire cutters
Flathead
screwdriver
Phillips
screwdriver
Ladder Electrical
tape
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD
Pliers
NOTE: This light fixture requires the use of one 120V,
60HZ, 100-Watt max, medium-base type A bulb (not
included). Do not exceed the recommended wattage.
EE Lock nut 1
FF Nipple 1
Please contact 904-642-4340 for further assistance.
EE FF GG
GG Finial 1

4
Pre-Installation (continued)
PACKAGE CONTENTS
Part
A
B
Description Quantity
1
1
C
Glass Shade
1
Fixture body
Backplate
D1Cup

Assembly
1 Assembling the light fixture
Carefully unpack the fixture and lay out all
parts on clean surface.
5Please contact 904-642-4340 for further assistance.
Installation
1Installing the mounting plate
Turn off the switch at the wall.
Turn the power off at the main fuse box.
Screw the nipple (FF) into the hole in the
cross bar (BB) and secure with a lock nut (EE).
Attach the cross bar (BB) to the wall outlet
box using the outlet box screws (CC).
2Connecting the wires
Install the fixture bare copper ground wire (1)
under the ground screw (DD) on the cross bar
(BB).
Connect the fixture ground wire (1) to the
supply ground wires (2) in the outlet box using a
wire nut (AA).
Connect the white fixture wire (3) to the white
supply wire (4) in the outlet box using a wire nut
(AA).
Connect the black fixture wire (5) to the black
supply wire (6) in the outlet box using a wire nut
(AA).
CAUTION: Ensure the power is off at the
main fuse box prior to beginning installation.

6
Installation (continued)
3 Hanging the light fixture
Push all excess wires into the outlet box.
Line up the hole of backplate (C) with the
nipple (FF), and then secure the fixture body (B)
to the wall with the finial (GG).
5Installing the bulb
Prior to installing the bulb, inspect socket for
silica packet. If packet is present, then remove
and throw away. Do not expose it to children or
pets.
Install the 120V, 60HZ, 100-watt max.
medium-base type A bulb (not included) in the
socket of the light fixture.
Please contact 904-642-4340 for further assistance.
4Assembling the glass shade
Slide the glass shade (A) into fixture body (B)
to let it sits on cup (D).

Care and Cleaning
Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Possible Cause
The bulb is burned out.
The power is off.
There is a faulty wire connection.
The circuit breaker is off.
There is an exposed wire.
There are too many items on
one circuit.
Discontinue use of the light
fixture.
Contact a qualified electrician or
call the Customer Service Team at
904-642-4340.
Unplug other items on the circuit.
Ensure that the circuit breaker
is set in the on position.
Check the wiring.
Ensure that the power supply is
turned on.
Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
7Please contact 904-642-4340 for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Manor Brook Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
904-642-4340
Retain this manual for future use.