Manutti Torsa User manual

instruction manual
coffee table Ø148 cm

2
Torsa is the epitome of sophistication: slender and light. The sculpted wooden base is
combined with a table top made of faux marble or monochrome ceramic. A relaxing
coffee break, a festive banquet or jolly aperitif: Torsa turns any occasion into a moment
to remember. Thanks to its understated size, Torsa is apt for small or large spaces and
is multi-functional.
Here is how to stat your outdoor moments of peace and connection under the sun.
Installation
x 1 top frame
x 3 KD bolt M6 x 60 mm (a)
x 3 washer Ø12 x 2 (b)
x 3 leg
Before assembly, make sure to cover the floor to prevent damage to the table suppot.
Inset the legs of the table in the provided recess. Match the number on the leg with the
number on the suppot.
x 1 Hex key 4 (c)
1
1
3
3
2
2
1
1
How to assemble the support
Parts

3
Fasten the legs using the hexagonal key, the hexagonal screws and the washers.
C
A
B

4
Installation
x 1 suppot
x 3 bolt M5 x 3 washer
x 1 table top
Fixate
Parts
How to assemble the table top
Place the suppot onto the table top. Make sure to match the pre-made holes of the suppot
with the provided recess in the table top.

5
Adjust feet
Check with a spirit level if your table is level. If not, you can level the table by (un)screwing
the adjustable feetcaps.

6
WARNING:
Do not use a high pressure cleaner to clean your furniture base.
This may damage your furniture.
IMPORTANT:
Do not sit or lean on the edges of the table!
Safety
IMPORTANT:
Lift the table with at least 4 persons. Tables need to be kept
horizontal while lifted. Do not drag the table across the floor.

7
Maintenance
Go to manutti.com/maintenance

200615
Contact the Manutti customer service anytime and
get all your questions answered at suppo[email protected]
Need more assistance?
manutti.com