Manutti Torsa User manual

instruction manual
(high) dining table 264 x 118

2
x 1 top frame
x 12 KD Bolt M6 x 25 mm (a)
x 8 Phillips screw 4 x 30 mm (b)
x 12 washer M6 (c)
x 2 leg
x 1 hex key 4 (d)
Torsa is the epitome of sophistication: slender and light. The sculpted wooden base is
combined with a table top made of faux marble or monochrome ceramic. A relaxing
coffee break, a festive banquet or jolly aperitif: Torsa turns any occasion into a moment
to remember. Thanks to its understated size, Torsa is apt for small or large spaces and
is multi-functional.
Here is how to stat your outdoor moments of peace and connection under the sun.
How to assemble the support
Parts

3
Installation
Before assembly, make sure to cover the floor to prevent damage to the table suppot.
Place the legs on the L-shape of the metal frame.
Fasten the legs using the hex key, the KD bolts and the washers.
Turn the table and fasten the legs on the top side of the metal frame using the Phillips
screws and screwdriver (not provided).
C
D
A
B

4
Installation
x 1 suppot x 1 table top
Place the table top on the suppot with at least 4 persons.
Parts
How to assemble the table top

5
Check with a spirit level if your table is level. If not, you can level the table by (un)screwing
the adjustable feetcaps.
Adjust feet.

6
WARNING:
Do not use a high pressure cleaner to clean your furniture base.
This may damage your furniture.
IMPORTANT:
Do not sit or lean on the edges of the table!
Safety
IMPORTANT:
Lift the table with at least 4 persons. Tables need to be kept
horizontal while lifted. Do not drag the table across the floor.

7
Maintenance
Go to manutti.com/maintenance

200615
Contact the Manutti customer service anytime and
get all your questions answered at suppo[email protected]
Need more assistance?
manutti.com