Marantz VS3003 User manual
Confirming the accessories 3
Inserting the batteries 5
Operating range of the remote control unit 6
Part names and functions 7
Front panel 7
Rear panel 8
Side panel 9
Remote control unit 10
Connections
Connections 11
Basic connections 11
Connecting an external control device 14
Operations
Operations 15
Operating with the HDMI control (CEC) function 15
Operating with the remote control unit 16
Operating with the AVR control function 17
Troubleshooting
Troubleshooting 20
Appendix
Trademark information 23
Specifications
Specifications 24
Contents Connections Operations Troubleshooting Appendix Specifications
2
Front panel Rear panel Side panel Remote
Thank you for purchasing this Marantz product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Confirming the accessories
Check that the following parts are supplied with the product.
.
AC adapter AC adapter plugs
(5 types)
Power supply cable
(USB type,
approx. 4’10”/1.5 m)
HDMI cable
(40 Gpbs,
approx. 4’10”/1.5 m)
Mounting screws
(4 pieces)
Battery
(CR2032)
Remote control unit
(RC046SR)
Cautions on Using BatteriesSafety InstructionsQuick Start Guide
Wall-mount bracket
Contents Connections Operations Troubleshooting Appendix Specifications
3
Front panel Rear panel Side panel Remote
Inserting the batteries
1Insert a coin or other item into the slot on the battery
cover, turn counterclockwise, and remove the battery
cover.
.
Coin etc.
Battery cover
2Confirm that the direction of the battery is correct and
then insert the battery.
.
Battery (CR2032)
3While pressing down on the battery cover from above,
turn the coin or other item clockwise.
.
NOTE
0If the battery should have a leakage, immediately replace and dispose of the
battery. In this case, there is a risk of burn when the liquid comes in contact with
skins or clothes, so a great care should be taken. If the liquid accidentally comes in
contact, wash with tap water and consult a doctor.
0Remove the batteries from the remote control unit if it will not be in use for long
periods.
Contents Connections Operations Troubleshooting Appendix Specifications
5
Front panel Rear panel Side panel Remote
Part names and functions
Front panel
.
qw e
ARemote control sensor
This receives signals from the remote control unit. (v p. 6)
Point the remote control unit at this sensor when operating it.
BHDMI input indicators (HDMI INPUT 1 - 3)
The number of the HDMI input that is currently selected is lit.
This is lit as follows according to the power status of this unit:
0Power on: Blue
0Standby: Red
0The power of this unit is linked to the power status of the HDMI devices
connected to HDMI connectors 1 to 3 and automatically turns on.
0When the HDMI CONTROL switch is OFF:
Links to the power of the device that is connected to the currently selected
HDMI input.
0When the HDMI CONTROL switch is ON:
Links to the power of the devices that are connected to HDMI connectors 1
to 3.
CInput switching button (INPUT)
This selects the HDMI input.
When the button is pressed, the HDMI input switches.
Contents Connections Operations Troubleshooting Appendix Specifications
7
Front panel Rear panel Side panel Remote
Rear panel
.
HDMI IN HDMI OUT
5V/1A
DC IN
IN
IR
REMOTE CONTROL
(FLASHER)
wqer
ARemote control jack (REMOTE CONTROL (FLASHER) IN)
This jack can be used to connect and control this unit externally with a
separately sold IR repeater when this unit is positioned where the
remote control signal cannot reach.
Refer to “Connecting an external control device” (v p. 14) for how to
connect.
NOTE
0This will disable remote sensor reception of this unit.
BHDMI input connectors (HDMI IN 1 - 3)
These connect game consoles, media players, or other HDMI source
devices.
CHDMI output connector (HDMI OUT)
This outputs the selected HDMI input signal.
DDC input connector (DC IN)
This connects the supplied AC adapter.
Using an AC adapter other than the one supplied may cause fault.
Contents Connections Operations Troubleshooting Appendix Specifications
8
Front panel Rear panel Side panel Remote
Side panel
.
qw
AAVR control switch (AVR CONTROL)
You can use the remote control unit for your Marantz AV receiver/AV
amplifier to switch the HDMI input of this unit.
If using the HDMI control (CEC) function or the supplied remote control
unit to change the HDMI input of this unit, keep this switch turned OFF.
If using the AVR control function, it is necessary to change the settings
and connections from the AV receiver/AV amplifier in advance. Refer to
“Operating with the AVR control function” (v p. 17) for more
information.
BHDMI control switch (HDMI CONTROL)
If using the HDMI control (CEC) function, turn this ON. This links to
devices compatible with HDMI control (CEC) and changes the HDMI
input of this unit.
Refer to “Operating with the HDMI control (CEC) function” (v p. 15)
for how to operate using the HDMI control (CEC) function.
Contents Connections Operations Troubleshooting Appendix Specifications
9
Front panel Rear panel Side panel Remote
Table of contents
Other Marantz Switch manuals
