Marathon CL030078 User manual

| EN |
Atomic Alarm Clock
User Manual

EN
English
Table of Contents
1. Features
2. What’s in the box
3. Getting Started
4. Time and Alarm Setting
5. Thermometer
6. Backlight

Features
Time
• 12/24 hour time display selectable
• Daily Alarm function
• Radio Controlled on/off function
• Eight time zone
• DST on/off function
Temperature
• Measurable range: -9.9°C ~ +60°C
(14.1°F ~ 140°F)
• Measures °C / °F user selectable
EN

What’s in the box
Atomic Alarm Clock Front LCD Screen
A1: Radio control icon
A2: Time/Year
A3: Time Zone
A4: Alarm time
A5: Day of week
A6: Temperature
A1
A3
A5
A6
A2
A4
EN

Atomic Alarm Clock Backing
B1: SNOOZE/LIGHT button
B2: ALARM ON/OFF slide switch
B3: button
B4: -button
B5: +button
B6: button
B7: RESET button
B8: °C/°F button
B9: DST ON/OFF slide switch
B10: RCC ON/OFF slide switch
B11: Battery compartment
B8
B10B9
B11
B2
B7
B6B3 B5B1B4
EN

Getting Started
1. Open battery door.
2. Insert 2 AAA size batteries observing the
polarity marks [ +and – ].
3. Replace battery compartment cover.
4. The unit can be placed onto any at surface and
is ready for use now.
Time and Alarm Setting
Icon Turns On - Indicates signal has been
received
Icon Flashes - Indicates it is receiving
WWVB signal
Icon Disappears - Indicates signal has failed
EN

RCC - Radio Controlled Clock
Slide the RCC ON/OFF switch to turn on or turn off the
radio control function.
• When the RC function is ON
After startup or reset, the radio control icon
will ash on the LCD, indicating the clock is
automatically synchronizing with the WWVB
radio wave signal .
• The clock will automatically synchronize with the
radio wave signal at 3:00am every day to
maintain accurate timing. If reception fails, the
icon will disappear from the LCD.
• The clock can be set to scan the time signal
manually by holding the button for 2 seconds.
• To stop synchronizing with the WWVB radio wave
signal hold the button for 2 seconds.
NOTE: Please allow up to 72 hours (3 nights) for the
clock to synchronize with the WWVB signals.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
DST - Daylight Saving Time
• To turn ON Daylight Savings Time
º Both the DST switch and the RCC switch must be
turned on.
º When Daylight Savings Time is ON, The LCD
will display the icon .
• To Turn OFF Daylight Savings Time
º Slide the DST switch to OFF to turn off DST
function.
EN

NOTE: If you live in an area that does not recognize
DST, (Arizona and parts of Hawaii) you must slide
the DST switch to OFF.
Manual Time Setting:
• When in “time display” mode (the standard
viewing mode);
a. Press the button to view the year.
b. Hold the button for 2 seconds to
enter the Clock/Calendar setting mode.
c. Press the +or -button to adjust the settings.
d. Press the button again to conrm each
setting.
NOTE: Holding the +or -button will speed up the
time setting.
The setting sequence is shown as follow:
1Press = Time Zone
2Presses = 12/24 Hour
3Presses = Hour
4 Presses = Minute
5Presses = Second
6Presses = Day of Week - Language
7Presses = Year
8Presses = Month/Date Sequence
9 Presses = Month
10 Presses = Date
There are 3 selectable languages for the days of the
week: English (ENG), French (FRE), Spanish (ESP).
EN

NOTE:
• All setting modes will automatically exit in 15
seconds without any adjustment.
• Seconds only can be adjusted to 0.
• If the “day of the week” is incorrect, please
double check the “year” entered.
• When the time is in 12 hour format;
indicates 8 o’clock in the morning.
indicates 10 o’clock at night.
There are 8 time zone for selectable:
• Eastern - EST
• Atlantic - AST
• Newfoundland - NST
• Hawaii - HST
• Alaskan - AKST
• Pacic - PST
• Mountain - MST
• Central - CST
Daily Alarm Setting:
• Press the button to toggle the display
between ALARM TIME and DATE.
• Setting the alarm
º Hold the button for 2 seconds.
º The alarm time will ash.
º Press +or -button to adjust the alarm time.
º Press button to conrm the setting.
NOTE: Holding the +or -button will speed up the
setting.
Snooze Alarm Function:
• Slide the ALARM ON/OFF switch to ON to activate
the alarm function, Slide ALARM ON/OFF switch to
EN

• Press °C/°F button to switch between Celsius and
Fahrenheit.
Thermometer
OFF to deactivate the alarm function.
• The Alarm icon is displayed on the LCD when
the alarm is turned on.
• The alarm icon will ash. when the alarm
sounds.
• Pressing the SNOOZE/LIGHT button will delay the
alarm for around 5 minutes, (the will continue
to ash on the LCD). After 5 minutes the alarm
will sound again. This snooze function can be
enabled for up to 7 times.
• Press any button other than the SNOOZE/LIGHT
button, to stop the alarm. Otherwise the alarm
will continue for 2 minutes before stopping
automatically.
EN

• If the temperature is out of the measurable
range, the LCD will display;
º LL.L = Temperature is below the minimum
temperature.
º HH.H = Temperature is above the maximum
temperature.
NOTE: When the temperature is over 50°C, (or
123°F) the LCD might not be able to display the
functions properly.
Backlight
Pressing the SNOOZE/LIGHT button, will turn on the back
light for 5 seconds.
Caution:
• The clock will lose the time when the batteries
are removed.
• If the clock is not working properly, press the reset
button with a pin.
• Do not expose the clock to direct sunlight, wet
EN

areas, or extreme heat, cold, or humidity.
• Never clean the device using abrasive or
corrosive materials or products as they may
scratch the plastic and/or corrode electronic
circuits.
Troubleshooting
If the clock does not receive a signal, please try the
following:
• Install a new fresh set of batteries (this will help
boost the signal faster.)
• Place your clock near a window.
• Your clock should be at least six feet away from
any electrical appliances such as TVs or
computers which can cause signal interference.
EN
• Bad weather and electrical storms during the
night may interfere with the WWVB signal.

Marathon Watch Company Ltd.
Customer Service: / Service Clients : / Servicio al cliente:
www.MarathonWatch.com
Designed in Canada / Conçu au Canada /
Diseñado en Canadá
Made in China / Fabriqué en Chine / Hecho en China
Garantie de 2 ans2 year warranty 2 años degarantía