
inders shower panel INSTALLATION GUIDE
sales@marbletrend.com.au
www.marbletrend.com.au
HEAD OFFICE
(NSW)
2/97 BANKSIA ST
BOTANY NSW 2019
T. 1300 717 717
F. 1300 746 480
VICTORIA
T. 1300 717 717 F. 1800 225 315
QUEENSLAND
T. 1300 717 717 F. 1300 746 480
WESTERN AUSTRALIA
T. 1300 717 717 F. 1800 225 315
TASMANIA
T. 0428 223 116 F. 1800 225 315
SOUTH AUSTRALIA
T. 0499 221 201 F. 1800 225 315
STEP 1
A) Place wall jamb (2) on wall make sure jam is level and plumb
and mark holes
B) Drill 4 x 6mm holes depth of 35mm in wall and insert 6mm anchors (3)
C) Fix wall jamb using 4mm stainless steel washers (4) and 4 x
3.5x35 screws (5)
STEP 2
A) Insertxedpanel(1)intowalljamb(2)
B) Drill4x3.2mmholesandxpaneltowalljamusing4x3.9x8
screws (6) and place plastic screw caps (7) over screw heads
STEP 3
A) Placesupportarminpositionontopofxedpanelthenmark
hole on wall and drill 8mm hole to a depth of 35mm and insert
8mm anchor (11)
B) Fix support arm using 5x45mm stainless steel screw (12)
C) Tightengrubscrewtoxedpaneltoensurepanelisleveland
plumb
STEP 4
A) Placewalljambcap(8)onwalljamandcover(9)forxedpanel
STEP 5
A) Apply silicone sealant around external joints only of wall jamb and
xedpanel
B) Allow 24hrs for silicone to set bfore using shower
1. 1 x Fixed panel with jamb
2. 1 x Wall jamb
3. 4 x 6mm anchors
4. 5 x 4mm SS washers
5. 4 x 3.5x35 SS screws
6. 4 x 3.9x8 SS screws
7. 4 x Screw caps
8. 1 x Wall jamb cap
9. 2 x Side panel covers(L/R)
10. 1 x Support arm assembly
11. 1 x 8mm anchors
12. 1 x 5x45 SS screw
3
4
5
1
9
76
12
6
1 Fixed panel
1 Wall jamb
4 φ6mm Anchors
φ4mm(φ
5/32
")
Stainless Steel Washer
11
10
9
7
9/3/
11
10
2
12
8
WARRANTY This product is covered by a 1 year product replacement including labour and materials.
Please refer to www.gemini-industries.net for full warranty terms
COMPONENT LIST
SHOWER PANEL MODELS
Model Size
SSSP26CHCLP 2000 x 851 (+25)
SSSP34CHCLP 2000 x 1165 (+25)