Marco JET6 User manual

1900042 Flash Series Manual Fill
1900042 Flash-Serie
Série 1900042 Flash
Серия Flash 1900042
JCG
Product no. 1000891
1

INFORMATION
INITIAL SETUP
CLEANING
CONTENT PAGE
2
6
8
32
EN
PRECAUTIONS AND SAFETY FEATURES
Machine design has taken into account all reasonable user safety
precautions; nevertheless, particular conditions of installation and/
or handling may create unforeseen situations beyond the installer's
control which will require case-by-case evaluation of residual risks. We
recommend keeping the following in mind:
• Always handle the machine with care to avoid the danger of it falling.
• The packing materials (carton, cellophane, staples, polystyrene,
etc.) can cut, wound or create hazards if used improperly or
handled carelessly. Store such materials out of reach of children and
irresponsible persons.
• This symbol on the appliance or package means that the appliance
must not be considered as normal household refuse but
that it must instead be delivered to an appropriate collection
centre for the recycling of electric and electronic appliances.
Make sure that this appliance is disposed of correctly and
you too will be making your contribution to the prevention of
negative effects on health and the environment, which could
otherwise be caused by inadequate disposal. Recycling materials helps
to preserve our natural resources. For more information about how to
recycle this product, you can contact your local council ofce, local
refuse disposal service or the retailer from whom you purchased the
appliance.
• Before carrying out any installation or adjustment process, be sure to
have read and thoroughly understood the warnings in this manual.
• The company cannot be held liable for any damage to people or
property resulting from failure to respect the instructions concerning
safety, installation and maintenance contained in this manual.
• The power cord of this appliance must never be replaced by the
user. In the event of damage, switch off the appliance and only contact
professionally qualied technicians for its replacement.
• Should you decide to no longer use this type of appliance, we
recommend that you make it inoperative: unplug the appliance from the
mains socket and cut off the power cord.
• All defects and/or anomalous machine behaviour should be reported
immediately to authorized installation and/or maintenance personnel.
• Before connecting the machine, check that electrical power supply
corresponds to the specications on the data plate.
• Avoid use of multiple-plug adapters and extension cords.
• The ground wire must be connected; the electrical system must meet
the standards set by local safety laws and regulations.
• The machine must be installed only by authorized, qualied personnel.
• Check that the machine components have suffered no damage during
shipping; in the case defects or anomalies are found, interrupt
installation and request replacement.
BASIC SAFETY PRECAUTIONS
• Never touch the machine with damp or wet hands.
• Never use the machine when barefoot.
• Never attempt to unplug the machine by pulling the power
cord or the machine itself.
• Do not expose the machine to atmospheric agents (sun
rain, etc.).
• Never allow the machine to be used by children or by
irresponsible persons.
• Always use the appliance on a at, steady surface that is
able to support its weight.
• Always unplug the machine from the power supply before
performing any cleaning or maintenance operations.
• Do not use jets of water or detergents for cleaning.
• In the case of machine breakdown or malfunction switch
the machine off and do not tamper with it.
• For repairs contact only an authorized service center and
request use of original spare parts.
• Non-observance of the above precautions may make the
machine unsafe for future use.
• Do not leave the machine switched on when not in use.
Unplug the machine when not in use.
• Do not obstruct the ventilation and/or heat dissipation
openings and/or slits nor introduce water or any other
liquids into same.
• Never insert spoons, forks or other utensils into the
pouring lip (11) (see Fig. 1 & 7), or into the coffee grain
container (2) (see Fig. 1) for any reason whatsoever while
the appliance is operating.
• Always switch off the appliance before removing
blockages from the pouring lip.
• Never place the appliance in water or other liquids.
• Should a foreign body stop the motor, switch the machine
off immediately and contact an authorized service center.
WARNING
Those machines bearing the “EL. MOTOR WITH THERMAL
PROTECTION” label are equipped with device which
protects the motor from overheating.
When this device is engaged, do not attempt to operate the
machine: Isolate the machine from the power supply and
eliminate the cause of the trouble before re-starting.
EN
IMPORTANT INFORMATION
This manual is designed for use by the user of the machine and/or by those performing maintenance
on the machine and must be considered an integral part of the machine itself.
This manual provides information concerning correct use and appropriate maintenance of the
machine, as well as useful indications for ensuring user safety. This manual must be preserved for
the entire working life of the machine and must be transferred, together with the machine, to future
users or owners. The information contained in this manual must not be construed as substituting
the safety prescriptions and the technical data regarding installation and operation carried on the
machine itself and on the packing materials. This manual reects the current state of machine
technology and shall not be considered obsolete solely because updated at a later date on the
basis of acquired experience. The manufacturer reserves the right to make modications to this
manual with no obligation to update previous versions except in exceptional cases. Improper
use of the machine or use in manners other than those described in this manual shall invalidate
the guarantee conditions and shall release the manufacturer from all responsibility, the machine
must be used only by adult, responsible persons. This manual must be preserved with care: the
manufacturer declines all responsibility for damages to persons or things or to the machine itself
deriving from improper use or use in manners other than those described herein or in the case the
maintenance and safety precautions described herein are not respected.
A
B
C
D
EG
F
A. Model Number and name.
B. Product serial code (mmyyxxxxxx)
C. Rated Voltage.
D. Rated Power.
E. Contact details.
F. WEEE Logo
This logo indicates that the product must
not be disposed of as household waste.
To help prevent possible harm to human
health and/or the environment, the product
must be disposed of in an approved and
environmentally safe recycling process.
For further information on how to dispose
of this product correctly, contact product
supplier, or the local authority responsible
for waste disposal in your area.
G. Regulatory standard logo
This equipment has been designed
and tested to comply with all applicable
regulatory standards set by
international, independent and government
authorities.
RATING PLATE
0517XXXXXX
JCG
HZ
20

45
Fault Probable Cause Action
The coffee is too weak Not enough ground coffee has been used Increase the amount of coffee
Coffee grind is too coarse Reduce the coarseness of the grind
The coffee is too strong Too much ground coffee has been used Reduce the amount of coffee
Coffee grind is too coarse Decrease the coarseness of the grind
Not enough water has been used Increase the amount of water
The basket is overowing. Coffee grind is too ne Increase the coarseness of the grind
Too much ground coffee has been used Reduce the amount of coffee
Grinder doesn’t start Power cord is not connected to jet Make sure power cord is connected
Grinder is switched off Make sure switch is in ‘On’ position
Erratic grind ow Clump crusher is failing Replace clump crusher
TROUBLESHOOTING
EN
IDENTIFYING BREAKDOWNS
Contact specialized personnel.
CLEANING AND MAINTENANCE
Recommended to check burrs after 350kg and change after 600kg
(for espresso, varies depending on coffee and machine use).
WARNING
Disconnect the machine from the electrical source before carrying out any cleaning or
maintenance operation.
WARNING
Do not pull on the electric cable nor the machine itself, to remove the plug from the electrical
outlet.
PRESERVATION OF THE MANUAL
This manual must at all times be available to the machine user and/or the persons performing
maintenance on the machine, who must be provided with full information regarding correct
machine use and residual risks.
This manual must be preserved in a clean, dry place away from sources of heat. This
manual must be used in a manner such as not to damage any part of its contents.
Do not remove, tear out or re-write any part of this manual for any reason. In case of loss of
this manual or for further information, please contact your area retailer or the manufacturer.
EN
APPLICATIONS AND USE
• This coffee grinder has been devised for professional use by trained
personnel.
• The grinder/dispenser must be used only for the application for which
it was designed; that is, grinding roasted coffee beans. Any other use
must be considered improper and therefore dangerous.
• The manufacturer shall not be held responsible for damages deriving
from improper, erroneous or unreasonable use of the machine.
• The appliance must not be used by children or people with reduced,
physical, sensorial or mental abilities. It must also never be used by
people without the necessary skills and experience unless under
supervision or during training.
Do not allow children to play with this equipment at any time.
• The machine is not designed for use in extreme environmental
conditions and in any case at temperatures outside the -5°C to +40°C
range.
• The user must respect the general safety regulations in force in the
country in which the machine is installed as well as the rules of common
sense, and shall be responsible for ensuring that periodic machine
maintenance is correctly performed.
• The persons installing and using the machine and performing machine
maintenance shall inform the manufacturer of any defects or damages
due to wear that might jeopardize the original safety features of the
machine.
• The installer shall be responsible for checking that the machine is
installed in tolerable environmental conditions such as to not to create
health or safety hazards for those using the machine.
• Any responsibility deriving from components manufactured
and installed on the machine shall be assumed by the respective
manufacturers; responsibility attributable to the persons authorized to
use the machine shall be assumed by the customer.
• The machine is designed for 24-hour intermittent service. The machine
components are designed and built to ensure at least 1000 hours’
operation.
• Good cleaning and maintenance also contribute to determining long
machine life.

67
98
7
10
X4
132
O
65
4

89
3
54
2
O
1