Marco 102101 User manual

Scroll Metal
Aquarium Stands
ASSEMBLY INSTRUCTIONS
CUSTOMER SERVICE
Toll Free: 1-888-627-2601
Monday - Friday, 8:30 AM to 4:30 PM CST 85215 - 07/19
Marco Group Inc.
5400 Doniphan Drive, Neosho, MO 64850
10 Gallon
Model# 102101 (Black)
Model# 102102 (Silver)
29 Gallon
Model# 102291 (Black)
Model# 102292 (Silver)
20 Gallon
Model# 102201 (Black)
Model# 102202 (Silver)
55 Gallon
Model# 102551 (Black)
Model# 102552 (Silver)
These Assembly Instructions cover all models listed here.

2
IMPORTANT SAFETY INFORMATION
Please read all the following information before assembling and using your aquarium stand.
THIS PRODUCT IS NOT A TOY – NEVER allow small children to touch, climb on or play with the aquarium or the
aquarium stand. Serious injury or death could result.
WHERE TO PLACE YOUR AQUARIUM
Use only an aquarium stand designed to support the weight and size of your aquarium. The filled weight of an aquarium is
approximately 10 to 12 pounds per gallon. This stand is designed only for use on level surfaces. Failure to place your stand
on a level surface could cause the aquarium to leak, crack or even tip or fall. Never tip the stand from the upright position.
MOVING YOUR AQUARIUM STAND
Always position the stand in the desired location before putting the aquarium tank in place. Never attempt to move the
stand with the aquarium in place. Never remove an aquarium tank from the stand unless the aquarium tank is completely
empty. Never carry the stand by the top.
BEFORE BEGINNING ASSEMBLY:
Please review the Parts List to ensure you have all the parts shown here. If you nd missing or broken parts,
or are in need of assembly guidance, call toll free, 1-888-627-2601 and we’ll be happy to help.
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE.
¼-20 x ¾” Bolt (x3)
Top Shelf (x1)
Bottom Shelf (x1) Brace (x2)
Scroll Leg (x2)
10 gallon
10 gallon
20 gallon
20 gallon
55 gallon
55 gallon
Note: Top Shelf will vary
depending on size of stand.
Note: Bottom Shelf will vary
depending on size of stand.
¼-20 x 1½” Bolt (x8)
¼-20 Lock Washer (x11)
¼-20 Hex Nut (x11)
Wrench (x11)
PARTS LIST
A
B
C
D
IE
F
H
G
29 gallon
29 gallon

3
TOOL REQUIRED
ATTACH TOP
SHELF TO LEGS
STEP 1: Place top shelf upside down
on a smooth, level surface.
STEP 2: Place one scroll leg inside of
top frame as shown.
STEP 3: Insert 2 bolts “B” through
holes in top and leg and secure each
with lock washer “C” and nut “D”.
NOTE: Leave nuts slightly loose at this time so the
stand can be leveled later.
STEP 4: Repeat above steps for
attaching other Scroll Leg.
ATTACH BOTTOM
SHELF TO LEGS
STEP 5: Position bottom shelf as
shown here making sure cross brace
holes are located on the same side as
noted. Attach bottom shelf to inside of
legs using 4 bolts “B”. Secure with lock
washers “C” and nuts “D”.
NOTE: Leave nuts slightly loose at this time so the
stand can be leveled later.
Wrench (supplied)
B
B
B
C
C
D
D
Top Shelf
Bottom Shelf
Make sure these cross brace
attachment holes are located
on same side before attaching
bottom shelf.
Scroll Leg
B
B
B

CARE & MAINTENANCE
• Clean furniture with a soft cotton cloth moistened with water.
• DO NOT use abrasives.
• DO NOT leave water on any of the stand’s surfaces. Always wipe spilled water
from the stand. Water, for prolonged periods, could damage the stand’s surface.
LIMITED WARRANTY
This aquarium stand is under warranty by Marco Group, Inc. against defects in material and workmanship for 90 days from
the date of purchase. If any component of the stand is found to be defective, you may contact us for replacement provided
that it has not been modied, damaged or misused. (Proof of date of purchase must be provided).
THIS WARRANTY IS VOID if the aquarium stand is modied, if it is not placed on a at, level surface, if it is used with a tank
other than it is designed, if it is moved with the tank in place or if it is used for other than it’s intended purpose.
This warranty is limited to replacement of the stand only. Warranty does not cover loss of sh, personal injury, property loss
or damage arising out of use of the aquarium stand. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic rights
and you may have other rights that vary from state to state.
Revised 07/2019©2019 Marco Group Inc.
ATTACH BRACES
TO FRAME
STEP 6: Attach cross braces to
bottom and top shelves as shown
using 3 bolts “A”. Secure each bolt
with lock washers “C” and nuts “D”.
STEP 7: Place stand in upright
position and check to make sure
stand is level and has proper contact
with floor. Once stable, complete
assembly by finish tightening down
all nuts securely.
A
A
A