Marco Aquatic Fundamentals 11101 Datasheet

P ART
P ART P ART P ART P ART P ART
#1 #2 #3 #4 A B
MMIIXXEEDD
MMEEDDIIAA SSTTAANNDD
MMODELS 1111110011,,
1111220011,, 1122220011,, 1111229911 && 1122229911
E ASY A SSEMBLY I NSTRUCTIONS AND P ARTS L IST
THANK YOU FOR PURCHASING THIS
QUALITY PIECE OF FURNITURE.
AQUATIC FUNDAMENTALS IS DEDICATED TO
PROVIDING A QUALITY PRODUCT AND WILL MAKE
EVERY ATTEMPT TO DELIVER
CUSTOMER SATISFACTION.
85080 04/03
2
P ARTS L IST Q UANTITIES
NOTE:
THESE HOLES ARE NOT
USED FOR ANY ASSEMBLY
PURPOSES.
AQUATIC FUNDAMENTALS
C
USTOMER S ERVICE
5400 Doniphan Drive
Neosho, Mo. 64850
T
OOLS R EQUIRED
B
4
1
B EFORE B EGINNING A SSEMBLY :
PLEASE REVIEW THE PARTS LIST TO ENSURE THAT
YOU HAVE ALL THE PARTS. IF YOU FIND MISSING
OR BROKEN PARTS, OR ARE IN NEED OF
ASSEMBLY GUIDANCE, CALL TOLL FREE,
1-888-627-2601 AND WE’LL BE HAPPY TO HELP.
PLEASE, DO NOT RETURN THIS
MERCHANDISE TO THE STORE.
3
11101 1 1 4 - 8 -
11201 1 1 4 - 8 -
12201 2 1 - 8 8 4
11291
11 4 - 8 -
12291
21 - 8 8 4
ALLEN WRENCH (INCLUDED)
A
MODEL
I MPORTANT S AFETY I NFORMATION
PLEASE READ ALL THE FOLLOWING INFORMATION BEFORE
ASSEMBLING AND USING YOUR AQUARIUM STAND.
THIS PRODUCT IS NOT A TOY. NEVER allow small
children to touch, climb on or play with the stand.
Serious injury or death could result.
WHERE TO PLACE YOUR AQUARIUM STAND
Use only a stand designed to support the weight and size of your equipment.
(HINT: If using for an aquarium stand, the filled weight of an aquarium is
approximately 10 to 12 pounds per gallon. This stand is designed only for use on
level surfaces. Failure to place your stand on a level surface could cause the aquar-
ium to leak, crack or even tip or fall). Never tip the stand from it’s upright position.
MOVING YOUR STAND
Always position the stand in the desired location before putting the equipment in
place. Never attempt to move the stand with the equipment in place.
Never remove an aquarium tank from the stand unless the aquarium tank is
completely empty. Never carry the stand by it’s top.
Visit our Web Page:
www.marcogroupinc.com
E-mail us at:
[e-mail]
LIMITED WARRANTY
This aquarium stand is under warranty by Marco Group, Inc. against defects in material and workmanship for 90 days from the date of purchase. If any
component of the stand is found to be defective, you may contact us for replacement provided it has not been modified, damaged or misused.
(Proof of date of purchase must be provided).
THIS WARRANTY IS VOID if the stand is modified, if it is not placed on a flat, level surface, if it is used with a tank other than it is designed,
if it is moved with the tank in place or if it is used for other than it’s intended purpose.
This warranty is limited to replacement of the stand only. Warranty does not cover loss of fish, personal injury, property loss or damage arising out of use of the
aquarium stand. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you. This warranty gives you specific legal rights and you may have other rights that vary from state to state.
Assemble furniture on the carton or carpet to protect the finish.
Clean furniture with a soft cotton cloth moistened with water.
DO NOT use abrasives.
DO NOT leave water on any of the stand’s surfaces. Always wipe
spilled water from the stand. Water, for prolonged periods, could
damage the stand’s surface.
A SSEMBLY & C ARE
T ANK
S IZE
10 G
ALLON
20 G ALLON
20 G ALLON
29 G ALLON
29 G ALLON
NOTE:
PART #2 HAS EXTENDED
LIP ON THIS END

85080 Pg. 2
MODEL’S11101, 11201 & 11291
A
SSEMBLY ONLY
SSTTEEPP
11
Attach (4) Parts #3 to
Part #2 using (4) Parts “A”.
SSTTEEPP22
Attach Part #1 to bottom
assembly with (4) Parts “A”.
NNOOTTEE::
Extended lip on Part #2 MUST
be in front of stand.
A SSEMBLY IS COMPLETE .
2
1
3
ACOUNTER-
SUNK HOLES
ARE ON
THIS SIDE
(BOTTOM)
SSTTEEPP
11STEP
2
A
MODEL’S12291 & 12201
ASSEMBLY ONLY
BBUUIILLDD
BBOOTTTTOOMM AASSSSEEMMBBLLYY FFIIRRSSTT
SSTTEEPP
11
Attach (4) Parts #3 to Part #2 using (4) Parts “A”.
SSTTEEPP
22
Hand turn the short threaded end of (4) Parts “B” into bottom assembly. Slide ONE Part #1
over (4) Parts “B”. Thread remaining (4) Parts #3 onto Part #1.
SSTTEEPP
33
Attach OTHER Part #1 to (4) Parts #3 with (4) Parts “A”.
NNOOTTEE::
Extended lip on Part #2 MUST be in front of stand.
A SSEMBLY IS COMPLETE .
2
3
A
STTEEPP
11
SSTTEEPP
22
3
3
1
B
COUNTER-SUNK
HOLES ARE ON
THIS SIDE
(BOTTOM).
S HORT
T HREADED E ND
G OES D OWN
STEP
3
1
BBUUIILLDD
BBOOTTTTOOMM
AASSSSEEMMBBLLYY
FFIIRRSSTT
NOTE:
THREAD PART
“B” INTO
PART #3 UNTIL
IT IS INSERTED
AS FAR AS IT
CAN GO.
A
5400 DONIPHAN DRIVE
NEOSHO, MO 64850
IMPORTANT NOTE!
YOU MUST POSITION TANK
TOWARDS THE BACK
SIDE OF STAND.
EXTENDED
LIP MUST
BE
IN FRONT OF
STAND..
SEE
DETAIL BELOW
FOR
PROPER TANK
PLACEMENT..
TANK PLACEMENT DETAIL
EXTENDED
LIP MUST
BE
IN FRONT OF
STAND..
SEE
DETAIL BELOW
FOR
PROPER TANK
PLACEMENT..
EXTENDED
LIP
EXTENDED
LIP