Mark Bric SnapUp 82228 User guide

Mark Bric Display Corp.
North America Tel. [phone] Fax [phone] E-mail: [email protected]
Mark Bric Display AB
Worldwide Headquarters Tel. [phone] Fax [phone] E-mail: [email protected]
Mounting instruction
SnapUp Stretch stand
01.09.2012
Grip the structure over the second
row of hubs
Swing up the system Attach the ends with the velcro tapeLock all hubs, press all hubs together
1 2 3 4
Extra
Here in combination with a
SwingUp litterature stand
Mounting instruction – Instructions de montage – Aufbau-Anleitung – Instrucciones de montaje
4x3, item 82228
3x3, item 82227
2x3, item 82226
Unmounting
Démontage - Abbauen- El unmounting
Unlock all hubs and fell the system
together
Remove the ends with the
velcro tape
1 2
Extra
Carrying bag, Item 5058

Printed fabric production
Size of printed fabric - Dimensions du visuel - Größe der Grafik-Panels - Medidas del cartel
9441 00/19.03.2007
2260 mm
88.97”
Fabrication du visuel
Produktion von Grafik-Panels
Producción del cartel
Velcro strap (loop) to be sewn along each side of the graphic panels (dark gray).
Mantage de la bande Velcro
La bande velcrob(crochets) à coudre sur le tissu, (bandes matérialisées en gris sur les
dessins).
Anbringung des Klettsaums
Saum aus Klett (Schlaufe) ist angenäht an jeder Seite des Grafikpanels (dunkelgrau)
Montaje de la cinta Velcro
La cinta de Velcro (loop) debe ser cosida por la parte de atrás alrededor del panel gráfico
4x3 - 82228
3690 mm
145.25”
345 mm
13.50”
3000 mm
118.10”
345 mm
13.50”
Mount 40 mm (1.5”) velcro strap (loop)
3x3 - 82227
2260 mm
88.97”
2950 mm
116.10”
345 mm
13.50”
2260 mm
88.97”
345 mm
13.50”
Mount 40 mm (1.5”) velcro strap (loop)
2x3 - 82226
2260 mm
88.97”
2215 mm
87.20”
345 mm
13.50”
1525 mm
60.00”
345 mm
13.50”
Mount 40 mm (1.5”) velcro strap (loop)
Mounting of Velcro strap
Sewing and Cutting Information – Printed Fabric
Please observe: All measurements given are for the actual size of the system. The size
of the printed fabric depends on how much the fabric material stretches. We recommend
that you reduce the size of the fabric with 2% to allow for the stretch effect of the material.
However, please always test your chosen material before printing.