Mark BEAM SPOT User manual

Rev. 13.12.10
BEAM SPOT
User Manual / Instrucciones de Usuario

Thank you for choose this BEAM SPOT products, this model is the moving head light which is
the latest development of the smart, efficient products, beautiful shape, smooth R & D, combined
with the advanced techn ology of today's stage lighting products with international advanced
electronic control technology and excellent user-friendly industrial design , fully comply with CE
standard, accepted international standard DMX512 signal mode.
This moving head lights, use ceramic luminescent film reflector as a conden ser system, coupled
with the high-quality optical lens components, broadband voltage, a clear pattern, sharp and
uniform output light efficiency. Intelligent LED display module, the English language selection
mode, intuitive operating menu, shortcut.
This Beam spot, have 16/17/25 international standard DMX512 channels optional Horizontal scan:
540°ve rtical scanning 270° (16bit precision scanning) electronic correction, dot-matrix display,
four touch switch LED + single-Key flying shuttle can spin. The can be inverted 180°, the color
wheel is combined with white and 17 colors. Gobo wheel: 9 patterns + white effect round by3
facet prism and atomization function. 0-100% mechan ical dimmer, support mechanical strobe and
variable strobe effect, strobe macro function. The optical system of the lens group electric
focusing, the beam angle of 2.7 to 48° with overheating protection function.
This Moving head lights are widely used in television, disco, dance halls, nightclubs, large-scale
performances and other professional venues
manufacturer as soon as
possible.
STATEMENT
The product is good packing when ship out the factory. All users should strictly abide by the warnings and
nstructions stated in this manual, any damage and results due to misuse and the neglect of this operating
manual will be excluded from the deal responsibility this manual will not informed in additionally if have
technical changes.
PRODUCTION DESCRIPTION
1. PRODUCT INTRODUCTION
Size：320（L）×400（W）×580（H）mm
Net Weight：18KG
2. SAFETY INFORMATION
This product is only suitable for professional use, and does not apply to security for other purposes.
After you got the lights, please check the package whether have any damage caused by transportation.
If there is any damage, do not use this fixture, and please contact the dealer or
BEAM SPOT User Manual/Manual de uso Page 1
EN

Ta =40
This product is only suitable for indoor, IP20 protection class. Lamps should be kept dry to avoid
Moisture, overheating or dusty environment. Prevent lamps come into contact with water or any
other liquid.
The use of this product should pay attention to: fire, heat, electric shock, ultraviolet radiation, the
lamp to explode or
Shedding caused serious or fatal injury.
Need to read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to the warning signs on the
specification and equipment. If you have any problem for how to safely operate the equipment.
Please contact your dealer.
Please don't use the equipment if the temperature above 40º C
The lens should be changed if had damaged or any problems. Don't change the
non-original manufacturer lens.
Len size：￠1136×60 mm
Please don't move the package by one person only.
When Hang the fixture, please must verify that the facilities to be able to withstand the weight
of the lamps at least 10 times more.
Please make sure the Mounting hardware is strong enough no any damage, and insurance
for the safety rope as auxiliary security fixed in other facilities will need to verify before
installation. Installing or removing the equipment, to make the pulley below the work location.
Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
2.1 ANTI-HIGH TEMPERATURE
2.2 BURST PREVENTION
2.3 TO PREVENT FALLING WOUNDING
2.4 UV PROTECTION AND THE BULB EXPLOSION
BEAM SPOT User Manual/Manual de uso Page 2
EN

3. PACKAGE
ACCESSORY
CONTENT QUANTITY
1
HANG FIXTURE 2
SIGNAL CABLE 1
The lens and the light head covers should be timely replaced if any damage to rupture
The Fixture should be used with the protection screen together.
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the identified
power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
1. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
2. The equipment must be installed away from inflammable and explosive materials.
3. The equipment should be projected range of 3 meters away objects and projectiles
temperature less than 60 ° C; ---- 3.0m.
4. Fan or ventilation, at least in the range of 0.5 meters can not be an obstacle.
5. Do not place any object on the lens.
6. Handling at least allow the device to cool for 20 minutes.
7. Do not replace the non-original parts.
2.5 PREVENTION OF ELECTRIC SHOCK
2.6 TO PREVENT BURNING OR FIRE
3.1 ATTACHMENT
USER MANUAL
BEAM SPOT User Manual/Manual de uso Page 3
EN

PACAKGE SIZE
FLY-CASE 2 IN1 810*470*910
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure X,Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
In order to protect the light, there is a protect lock; During the transport , the lock will closed
keeping the item in safety state.
Note: Before unpacking check the damage is whether due to the transportation or not, if
you find any such damage, please do not use this item, and contact with the dealer
or manufacturer as soon as possible.
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
BEAM SPOT can be placed on the stage, or mounted in an arbitrary direction of the truss.
Two fast locks system could fix the item easily
1. Before installation must verify the fast lock is keep in good state, and can withstand at least
10 times the weight of product. Verify that the truss can withstand at least 10 times of the
total weight of the product and accessory equipments.
2. Fix the hang fixture into the hole, which located on the base of the price.
Seize handle of fasteners, clockwise rotate 1/4 turn and lock. Installed other one fastener
in the same method.
3. Using the safety cable which can withstand 10 times the weight of the equipment.
4. INSTALL STANDARD
3.2 TRANSPORT PROTECT LOCK
3.3 ABOUT PACK STAGE
3.4 UNPACKING
4.1 INSTALL LOCK
4.2 EQUIPMENT FIXED
BEAM SPOT User Manual/Manual de uso Page 4
EN

as following:
5. ALTERNATING CURRENT POWER SUPPLY
Input Voltage Total Power Frequency
110~240V 400W 50/60Hz
Fuse voltage Electronic current Specification
250V 6A 5×20
in the same method.
3. Using the safety cable which can withstand 10 times the weight of the equipment.
4. Make sure the X,Y protect locks are opened, Verify that within 3 meters there is no
combustibles .
WARNING
Fixture must use two fixing devices, and make sure the fixing device have locked! And only
fully clockwise rotate 90 ° can lock the hang fixture! Do remember plus a safety rope, and do
not connect the safety rope to plastic handle. It should be connect to the hole on the base!
Attention! One product only can accept one input one output.
BEAM SPOT DMX cable include 3 contact pins:
Pin 1, FOR GROUND; Pin 2 connected to the negative polarity signal; The pin 3
connected to the positive polarity signal.
DMX512 cable must use the professional shielded twisted pair cable; standard
loudspeaker cable is not reliable to control the long-range data.
Attention! Do not overload the connection. One continuous connection can only connect
up to 32 devices.
If use the DMX512 splitter. At first connect DMX512 Splitter input terminal to controller.
And then connected from the splitter output terminal to next device.
Do as above guide to connect other device, and finally coupled with terminal insertion
4.3 FIXTURE CONNECT
5.1 VOLTAGE, POWER, FUSE SPECIFICATION
BEAM SPOT User Manual/Manual de uso Page 5
EN

3. Loose the screws for the fan take off the stand for the fan.
4.Press the lamp reflector slightly use one finger, and press the lamp bottom
slightly use another finger. So the lamp will loose from the stand.
5.Pull out the wires for the lamp
6.Install the Lamp
The equipment must be operated by professionals; Make sure that the voltage of
power supply must be comply with the voltage identified on the lamp, and must have
an overload or leakage electrical protection.
ATTENTION!
Factory has equipped the standard 3 pin plug socket. Connect the power supply as
below table.
If lamp cable is damaged, replacement should be operate by factory or qualified
staff. Any question, please contact professionals or talk toa qualified electrician.
Live wire(L) Null(N) Ground wire
RED BLUE Yellow +Green
6. LAMP
LAMP MODEL POWER OF LAMP LIFE/HOUR COLOR TEMPERATURE
OSRAM HRI 280 280W 2200 HOURS 8000K
WARNING! There isa safety hazard or damage if install similar bulb
To reduce the risk of damage to light ,do change the lamp before using
time over 125% of lamp life.
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament. filament must be kept clean
1. Disconnect the power. Before replace lamp, fixture need 20 minutes for lamp
cooling. Fasten the head with Y axis protect lock in 60 ° position.
2. Use cross screwdriver to open the light body cover, remove the fan bracket,
pull out the bulb cable
6.2 LAMP REPLACE
6.1 LAMP DESCRIPTION
5.2 POWER PROTECT
BEAM SPOT User Manual/Manual de uso Page 6
EN

A001 DMX：001
ON PAN reverse On
OFF Pan reverse Off
Rtil Tilt Reverse Press UP into Tilt reverse, E key select up/down to
confirm on/off and save OK.
ON Tilt Reverse On
OFF Tilt Reverse Off
Press E into DMX address set, , UP and
DOWN key to select address number, E for
save.
Rpan Pan Reverse Press UP into Pan reverse, E key confirm up
and down, E key save OK...........................
7. CONTROL PANEL
POWER SIGNAL
LIGHT
DMX SIGNAL
LIGHT
DISPLAY SCREEN
BUTTON
7.1 CONTROL PANEL INTRODUCTION
8.1. DMX ADDRESS AND X, Y AXIS CONTROL
8. BEAM 201 CONTROL
BEAM SPOT User Manual/Manual de uso Page 7
EN

M ODE Press Up into mode Control,E key
select up/down to choose on/off and
save OK
DMX dmx mode
DIS1:16CH
DIS2:17CH
DIS3:25CH
AUTO Auto Run
SOUD Sound Active
DISPLAY MODE Press UP into Mode, E key select
up/down to choose on/off and save OK
MOD1：Normal display
MOD2：slightly bright display
MOD3：Display（any key to recover
Display Reverse
LAMP ON press E key, lamp on by manual, Display OK?
Blinking andpressE key againandsetlampon
OFF press E key, lamp off by manual, Display OK?
Blinking and press E key again and set lamp off
8.2 MODE CONTROL
8.3 DISPLAY MODE
8.4 LAMP MODE
BEAM SPOT User Manual/Manual de uso Page 8
EN

RE ST Reset
All Channels Reset Press E key , Whole unit
Reset
OPTO Expand
ON Press E key
OFF Press E key
16 CH (dmx-2 mode）DMX Value Description
CH01：Color 000-004 Color1
005-009 Color1＋Color2
010-014 Color2
015-019 Color2＋Color3
020-024 Color3
025-029 Color3＋Color4
030-034 Color4
035-039 Color4＋Color5
040-044 Color5
045-049 Color5＋Color6
050-054 Color6
055-059 Color6＋Color7
060-064 Color7
065-069 Color7＋Color8
8.5 REST: RESET MODE
8.6 OPTO: OPTICAL COUPLE MODE
8.7 CHANNEL CONTROL
BEAM SPOT User Manual/Manual de uso Page 9
EN

070-074 Color8
075-079 Color8＋Color9
080-084 Color9
085-089 Color9＋Color 10
090-094 Color 10
095-099 Color 10＋Color 11
100-104 Color 11
105-109 Color 11＋Color 12
110-114 Color 12
115-119 Color 12＋Color 13
120-124 Color 13
125-129 Color 13＋Color 14
130-134 Color 14
135-139 Color 14＋Color 15
140-144 Color 15
145-149 Color 15＋Color1
150-200 Color change Fast to Slow
201-204 Stop
205-255 Reverse from slow to fast
CH02：Strobe 000-019 Off
020-039 On
040-059 Off
060-079 Strobe Random
080-139 Strobe from slow to fast
140-179 Open quickly, close slowly
180-219 Open slowly, Close quickly
220-233 XY axis color,gobo change
234-255 Open
CH03: Dimmer 000-007 Off
008-255 Linear Dimmer
CH04：Fixed Gobo 000-011 Gobo1
012-023 Gobo2
024-035 Gobo3
036-047 Gobo4
048-059 Gobo5
060-071 Gobo6
072-083 Gobo7
084-095 Gobo8
096-107 Gobo9
108-119 Gobo10
120-131 Gobo11
132-143 Gobo12
144-155 Gobo 13
BEAM SPOT User Manual/Manual de uso Page 10
EN

156-167 Gobo 14
168-179 Gobo 15
180-191 Gobo 16
192-203 Gobo 17
204-207 Gobo 18
208-255 Gobo from fast to slow change
CH05: Prism 000-127 No effect
128~255 Prism into
CH06 ：Prism Rotation or
Index
000-127 Angle 0-360
128-178 Fast to Slow Rotation in
clockwise
179-204 stop
205-255 Fast to Slow Rotation in
anticlockwise
CH07: Rotation Gobo 000-020 Effect1
021-041 Effect2
042-062 Effect3
063-083 Effect4
084-104 Effect5
105-125 Effect6
126-146 Effect7
147-167 Effect8
168-188 Effect9
189-207 Effect 10
208-255 Rotation gobo from fast to
slow
CH08: Zoom 000-255 Linear zoom
CH09: Focus 000-255 Linear focus
CH10: Pan 000-255 Pan 0-540°
CH10: Pan Fine 000-255 Pan 7.2°fine
CH12: Tilt 000-255 Tilt 0-270°
CH13: Tilt Fine 000-255 Tilt 7.2°fine
CH14: Pan/Tilt Speed adjust 000-255 Pan/Tilt speed from fast to
slow adjust
CH15: Inside program 000-049 DMX Mode
050-059 Scenes1
060-069 Scenes2
070-079 Scenes3
080-089 Scenes4
090-099 Scenes5
100-109 Scenes6
110-119 Scenes7
120-129 Scenes8
BEAM SPOT User Manual/Manual de uso Page 11
EN

BEAM SPOT User Manual/Manual de uso Page 12
EN
130-139 Scenes9
140-149 Scenes 10
150-159 Program1
160-169 Program2
170-179 Program3
180-189 Program4
190-199 Program5
200-209 Program6
210-219 Program7
220-229 Program8
230-239 Program9
240-255 No effect
CH16: Controller reset/ Lamp
on and off（delay 3 seconds）
000-033 Empty
034-036 Lamp off
037-079 Empty
080-099 Inside program run(sound
active/auto Run)
100-152 Empty
153-155 Lamp on
156-218 Empty
219-221 Motors reset after delay 3s
247-249 Whole unit reset after 3s
17 Ch (DMX-3 Mode) DMX Value Description
CH01:Pan 000-255 Pan 0-540°
CH02:Pan Fine 000-255 Pan 7.2°Fine
CH03:Tilt 000-255 Tilt 0-270°
CH04: Tilt Fine 000-255 Pan 7.2°Fine
CH05: Pan/ Tilt speed 000-255 From fast to slow
CH06: Prism Rotation or
Index
000-127 Angle 0-360
128-178 Clockwise rotation from fast to
slow
179-204 Stop
205-255 Anticlockwise rotation from
slow to fast
CH07:Dimmer 000-007 Off
008-255 Linear dimmer
CH08: Strobe 000-019 Off
020-039 Open
040-059 Off
060-079 Strobe Random
080-139 From slow to fast

140-179 Open quickly, close slowly
180-219 Open slowly, Close quickly
220-233 Pan/Tilt gobo and color wheel
change
234-255 Open
CH09:Color 000-004 Color1
005-009 Color 1+Color2
010-014 Color2
015-019 Color 2+Color3
020-024 Color3
025-029 Color 3+Color4
030-034 Color4
035-039 Color 4+Color5
040-044 Color5
045-049 Color 5+Color6
050-054 Color6
055-059 Color 6+Color7
060-064 Color7
065-069 Color 7+Color8
070-074 Color8
075-079 Color 8+Color9
080-084 Color9
085-089 Color 9+Color 10
090-094 Color 10
095-099 Color 10+Color 11
100-104 Color 11+Color 12
105-109 Color 11
110-114 Color 12
115-119 Color 12+Color 13
120-124 Color 13
125-129 Color 13+Color 14
130-134 Color 14
135-139 Color 14+Color 15
140-144 Color 15
145-149 Color 15+Color1
150-200 Fast to slow Change
201-204 Stop
205-255 Reverse change from fast to
slow
CH10: Rotation Gobo 000-020 Gobo1
021-041 Gobo2
042-062 Gobo3
063-083 Gobo4
BEAM SPOT User Manual/Manual de uso Page 13
EN

BEAM SPOT User Manual/Manual de uso Page 14
EN
084-104 Gobo5
105-125 Gobo6
126-146 Gobo7
147-167 Gobo8
168-188 Gobo9
189-207 Gobo 10
208-255 Slow to fast change
CH11: Gobo/Prism Rotation or
Index
000-127 Angle 0-360
128-178 Fast to Slow Rotation in
clockwise
179-204 stop
205-255 Slow to fast Rotation in
anticlockwise.
CH12: Fixed Gobo 000-018 Gobo1
019-037 Gobo2
038-056 Gobo3
057-075 Gobo4
076-094 Gobo5
095-113 Gobo6
114-132 Gobo7
133-167 Gobo8
152-170 Gobo9
171-189 Gobo 10
190-207 Gobo 11
208-255 Rotation speed from slow to
fast
CH13：Iris（reserve）000-009 open
010-246 Linear iris from open to close
247-255 Close
CH14: Prism 000-127 No effect
128-255 Prism
CH15: Focus 000-255 Linear focus
CH16: Zoom 000-255 Linear dimmer
CH17: Controller reset/ Lamp
on and off（delay 3 seconds）
000-033 Empty
034-036 Lamp off after delay 3 seconds
037-079 Empty
080-099 Inside program run mode
(sound/autorun)
100-152 Empty
153-155 Lamp on after delay 3 seconds
156-218 Empty
219-221 Motors Reset after 3s
247-249 Whole units Reset after 3s

BEAM SPOT User Manual/Manual de uso Page 15
EN
25 CH(Default DMX-3mode) DMX Value Description
CH01: PAN 000-255 Pan 0-540°
CH02: Pan Fine 000-255 Pan 7.2°Fine
CH03: Tilt 000-255 Tilt 0-270°
CH04: Tilt Fine 000-255 Tilt 7.2°Fine
CH05: XY axis speed 000-255 From fast to slow
CH06: Prism Rotation or
index
000-127 Beam Angle 0-360
128-178 Clockwise Rotation from fast
to slow
179-204 stop
205-255 Anticlockwise Rotation from
slow to fast
CH07: Dimmer 000-007 off
008-255 Linear dimmer
CH08: Strobe 000-019 off
020-039 Open
040-059 Close
060-079 Strobe Random
080-139 From slow to fast
140-179 Open quickly, close slowly
180-219 Open slowly, Close quickly
220-233 Pan/Tilt gobo and color wheel
change
234-255 Open
CH09: Color 000-016 Color1
017-033 Color2
034-050 Color3
051-067 Color4
068-084 Color5
085-101 Color6
102-118 Color7
119-135 Color8
136-152 Color9
153-169 Color 10
170-186 Color 11
187-203 Color 12
204-220 Color 13
221-237 Color 14
238-255 Color 15
000-015 Color1（half）
016-031 Color 1+Color2（half）
032-047 Color 2+Color3（half）
048-063 Color 3+Color4（half）

064-079 Color 4+Color5（half）
080-095 Color 5+Color6（half）
096-111 Color 6+Color7（half）
112-127 Color 7+Color8（half）
128-133 Color 8+Color9（half）
134-159 Color 9+Color 10（half）
160-175 Color 10+Color 11（half）
176-191 Color 11+Color 12（half）
192-207 Color 12+Color 13（half）
208-223 Color 13+Color 14（half）
224-239 Color 14+Color 15（half）
240-255 Color 15+Color1（half）
000-255 Linear color
000-009 white
010-127 Fast to slow change
128-137 Stop
138-255 Reverse from slow to fast
change
CH10: Color mode 000-063 Whole mode
064-127 Half mode
128-191 Color slow change mode
192-255 Color fast change mode
CH11: Rotation Gobo 000-020 Gobo1
021-041 Gobo2
042-062 Gobo3
063-083 Gobo4
084-104 Gobo5
105-125 Gobo6
126-146 Gobo7
147-167 Gobo8
168-188 Gobo9
189-207 Gobo 10
208-255 Gobo change from slow to fast
CH12: Gobo mode 000-127 Rotation gobo Mode
128-255 Gobo index mode（360）
CH13: Gobo Rotation or Index 000-009 stop
010-127 Fast to Slow Rotation in
clockwise
128-137 stop
138-255 Slow to fast Rotation in
anticlockwise.
000-255 index
CH14: Index Fine 000-255 360°Pointing Index
BEAM SPOT User Manual/Manual de uso Page 16
EN

BEAM SPOT User Manual/Manual de uso Page 17
EN
CH15: Rotation gobo shaking 000-009 No shaking
010-127 Up to down
128-137 stop
038-255 Down to up
CH16: Fixed Gobo 000-011 Gobo1
012-023 Gobo2
024-035 Gobo3
036-047 Gobo4
048-059 Gobo5
060-071 Gobo6
072-083 Gobo7
084-095 Gobo8
096-107 Gobo9
108-119 Gobo 10
120-131 Gobo 11
132-143 Gobo 12
144-155 Gobo 13
156-167 Gobo 14
168-179 Gobo 15
180-191 Gobo 16
192-203 Gobo 17
204-207 Gobo 18
208-255 Fixed gobo change from slow
to fast
CH17: Fixed gobo Shaking 000-009 Stop
010-127 Up to down
128-137 Stop
038-255 Down to up
CH18: Iris（Reverse）000-009 Open
010-246 Linear Iris from open to close
247-255 Close
CH19: Reverse 001-255
CH20: Inside program speed 0000-255 From fast to slow
CH21: Prism 000-127 White
128-255 Prism
CH22: Focus Fine1 000-255 Linear focus
CH23: Focus Fine2 000-255 Focus Fine
CH24: Zoom 000-255 Linear Zoom
CH25: Controller reset/ Lamp
on and off（delay 3 seconds）
000-033 empty
034-036 Lamp off
037-079 empty
080-099 Inside program run （Sound
active/Auto-run）

BEAM SPOT User Manual/Manual de uso Page 18
EN
100-152 empty
153-155 Lamp On
156-218 Empty
219-221 Motors reset
247-249 Whole unit Reset
10. ANGLE
BEAM：1°—2.7°
SPOT ANGLE: 2.7°—38°
WASH ANGEL: 38°—48°
11. CLEAR AND MAINTENANCE
Warning: Please make sure cut off the power before open the covers.
( Kind Remind: Non-Professional don’t do this)
1、C ut off the power supply, cool down the lamp and open the covers.
2、Using vacuum or pressure blows gently blow any dust and floating structures.

DECLARACION
El producto está bien empaquetado cuando envían de la fábrica. Todos los usuarios deben acatar
estrictamente las advertencias e instrucciones que se indican en este manual, los daños y los resultados
debido al mal uso y el descuido de este manual serán excluidos de la responsabilidad .
DESCRIPCION DEL PRODUCTO
Gracias por elegir BEAM SPOT, este modelo es una cabeza móvil que representa el último desarrollo de
productos inteligentes y eficientes, gran combinación I + D, junto con la avanzada tecnología de iluminación
con control electrónico avanzado y excelente diseño de fácil uso, cumple plenamente con las normas
CE, aceptabdo la norma internacional DMX512 como modo de señal.
Esta cabeza móvil, usar un reflector cerámico de película luminiscente y un sistema de condensador, junto
con componentes de alta calidad en lentes ópticas y la luz de salida uniforme y eficien
te.
BEAM SPOT, tienen 16/17/25 canales DMX512 estándar internacional. PAN scan: 540 ° Tilt scan: 270 °
(escaneo de precisión de 16 bits) Corrección electrónica, de matriz de puntos, cuatro teclas táctiles LCD
+ Single-Key. La unidad puede colocarse invertida 180 º, la rueda de color combina el color blanco y
17 colores. Rueda de gobos: 9 patrones circulares + efecto blanco por ocho prisma y la función de
atomatización. dimmer mecánico 0-100%, luz estroboscópica, soporte mecánico y efecto estroboscópico
variable, función estroboscópica macro. El sistema óptico del grupo de lentes con enfoque eléctrico y
ángulo de haz entre 2.7 y 4.8º con función de protección ante sobrecalentamiento.
Las cabezas móviles son ampliamente utilizadas en televisión, discoteca, salas de baile, grandes
actuaciones, etc
.
1. INTRODUCCION AL PRODUCTO
Dimensiones：320（L）×400（W）×580（H）mm
Peso neto：18KG
2. INFORMACION DE SEGURIDAD
Mensaje de advertencia de seguridad
Este producto sólo es adecuado para el uso profesional, y no se aplica a la seguridad para otros fines.
Después de recibir este dispositivo, por favor compruebe si el paquete tiene daños causados 󰾬󰾬por el
transporte.
Si hay algún daño, no utilice este aparato, y por favor, póngase en contacto con el distribuidor o
1.1 DIMENSIONES Y PESO
BEAM SPOT User Manual/Manual de uso Page 19
ES