Marmitek Subwoofer Anywhere 635 User manual

Subwoofer Anywhere 635
3
13
23
33
43
53
User manual
Gebrauchsanleitung
Guide utilisateur
Modo de empleo
Manuale d’istruzioni
Gebruiksaanwijzing
1_20642_20190617_UG_103x145mm_80g_SA635_front.pdf 1 17-6-2019 14:09:01

© MARMITEK
2

Subwoofer Anywhere 635
3
ENGLISH
1 Table of contents
1 Table of contents...................................................................... 3
2 Safety instructions.................................................................... 4
3 Your product ............................................................................ 5
3.1 Introduction .............................................................................. 5
3.2 Package contents..................................................................... 5
3.3 Connections............................................................................. 6
4 Getting started ......................................................................... 7
4.1 Installing the transmitter ........................................................... 7
4.2 Installing the receiver ............................................................... 7
4.3 Extra receiver........................................................................... 8
5 Frequently asked questions (FAQs) ......................................... 8
6 Technical specifications ......................................................... 10
7 Notification ............................................................................. 11
7.1 Declaration of Conformity....................................................... 11
7.2 Recycling ............................................................................... 12
7.3 Copyrights.............................................................................. 12

© MARMITEK
4
2 Safety instructions
Please read these instructions thoroughly before you use the
device and keep them for future reference.
Only for indoor use.
Do not use the product in a damp environment or near water.
Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
Avoid using headphones/speakers with the volume turned up
for an extended period of time. Doing so may damage your
hearing. It is advisable to keep the volume at a moderate
level at all times.
Disconnect the AC/DC power adapter from the mains when
this device is not in use for prolonged time.
Never connect an adapter or power cord when it is damaged.
In that case, contact your supplier.
Never open the product: the device may contain parts with
deadly voltage.
Repairs or service should only be performed by qualified
personnel.
Improper use, self-installed modifications or repairs will void
any and all warranties.
Marmitek does not accept any product responsibility for
incorrect use of the product or use other than for which the
product is intended.
Marmitek does not accept liability for any consequential
damage other than the legal product responsibility.

Subwoofer Anywhere 635
5
ENGLISH
3 Your product
3.1 Introduction
Congratulations on your purchase of the Marmitek
Subwoofer Anywhere 635. The Subwoofer Anywhere 635
comprises of a transmitter and a receiver. The signal is
transmitted on 2.4 GHz and can thus pass through walls and
ceilings.
This transmitter/receiver allows audio signals to be transmitted
wirelessly.
•Digital Wireless Subwoofer Sender
•Position your subwoofer anywhere you like.
•Connect your subwoofer wirelessly to your surround amplifier or TV.
•Select the best position for your subwoofer, without any
cabling lying around your living room.
•Works with any brand of active subwoofer.
•Digital wireless technology provides interference-free
transmission while maintaining quality.
•Easy to install and intuitive to use thanks to automatic on/off
function; even your subwoofer's standby feature will continue
to work.
You can connect your surround set's subwoofer output, via the
Subwoofer Anywhere 635, to your active subwoofer's LFE
connection, without your subwoofer having to be near your
surround set.
The Subwoofer Anywhere 635 has a range of approx. 10 metres,
so you can enjoy your audio in the same or adjoining room without
limitations.
3.2 Package contents
1 x Subwoofer Anywhere 635 transmitter
1 x Subwoofer Anywhere 635 receiver
2 x Mini USB cable
2 x USB power adapter
2 x Mini Jack female to coaxial converter cable, mono
2 x Mini Jack female to coaxial converter cable, stereo
1 x Set of instructions

© MARMITEK
6
3.3 Connections
1. Mute
2. Mini USB port for power supply
3. On/off switch
4. Connection LED. Lights up green if a connection is made.
Blinks if there is no connection. Off if the transmitter/receiver
is off.
5. Power LED. Lights up red if the transmitter/receiver is
receiving power.
6. Audio input
7. Audio output

Subwoofer Anywhere 635
7
ENGLISH
4 Getting started
4.1 Installing the transmitter
You connect the subwoofer output of your surround set or TV to
the transmitter.
1. Use the supplied adapter cable to connect the
Subwoofer Anywhere 635 transmitter to the subwoofer
output jack of your audio system.
2. Connect the adapter to the mini USB port and insert the
adapter into the electrical socket. The red LED will now light
up.
3. The Subwoofer Anywhere 635 transmitter will now
automatically switch on and the green LED will begin to flash.
4. Now the sound of your audio source will be reproduced.
4.2 Installing the receiver
1. Use the converter cable supplied to connect the
Subwoofer Anywhere 635 receiver to the LFE/LINEX IN
coaxial (Cinch/RCA) connection on your Active Subwoofer.
2. Connect the adapter to the mini USB port and insert the
adapter into the electrical socket. The red LED will now light
up.
3. The Subwoofer Anywhere 635 receiver will now
automatically switch on and the green LED will begin to flash.
The transmitter and receiver will now establish a connection, after
which you will hear your subwoofer sound coming from the active
subwoofer that is connected to the receiver. The green LED will
stop flashing and then stay illuminated.

© MARMITEK
8
4.3 Extra receiver
Extra receiver for your Subwoofer Anywhere 635.
With an extra receiver, you can receive the sender’s signal at
more places in your house.
5 Frequently asked questions (FAQs)
I can’t connect my Subwoofer Anywhere 635.
Check the following:
1. Ensure that the power adapter is connected and the power
LED (5) is on (red).
2. Ensure that the distance between the transmitter and
receiver is not greater than 10 metres and that there are no
large obstacles in the way.
3. Check that the connection LED (4) is on (not blinking). If it is
not on, press the ON/OFF switch (3).
No sound comes out of the Active Subwoofer.
Ensure that the audio cable is correctly connected (LFE/LINE
IN), that the correct output has been selected on your audio
installation and that your audio system’s volume is set to the
desired level.
Check that neither the transmitter nor receiver is muted.
Make sure your audio system actually reproduces surround
sound and not, for example, just stereo sound on your front
speakers.
Can I connect my passive subwoofer directly to the receiver?
In order to hear sound or music, connect the receiver to an Active
Subwoofer (with built-in amplifier). You cannot connect a passive
subwoofer directly to the receiver.
My amplifier doesn't have an LFE output
A stereo RCA adapter cable is also supplied, which enables you
to use the PRE OUT L+R output of your amplifier.

Subwoofer Anywhere 635
9
ENGLISH
Can I connect multiple subwoofers?
Yes, you can pair multiple receivers to the transmitter, allowing
you to position multiple subwoofers anywhere you like.
Why choose a wireless solution?
If you were to use a long RCA cable for the connection between
the amplifier and subwoofer, there is a strong possibility of a
humming sound. A wireless solution won’t encounter this problem.
Can I connect the USB cable from my transmitter/receiver to
a USB connection on my amplifier or TV, for example?
Yes,you can. But the connection is only used for powering your
Subwoofer Anywhere 635. The transmitter/receiver then switches
on and off automatically in line with the amplifier or TV (auto
power on).
Do you have other questions that have not been resolved by the
above information? Please go to www.marmitek.com

© MARMITEK
10
6 Technical specifications
Supply voltage 5V 500mA by Mini USB
Power Consumption < 2W
LEDs Power, Link
AV RF transmission Digital
Pairing Automatically
RF data rate Up to 2 Mbps, GFSK
modulation
Audio frequency range 20Hz ~ 48KHz
Audio in/output RCA, mono and stereo
Transmission Range Up to 40m free field, up to 10m
through walls and ceilings
RF frequency 2.4 GHz
Ambient temperature 0 ~ +50°C (Operation)
-20°C tot +70°C (storage)
Weight 20 grams
Dimensions 61 x 51 x 12 mm
Power Adapter
Input voltage 100-240 VAC
Input AC frequency 50-60 Hz
Output voltage 5.0 V
Output current 0.5 A
Output power 2.5 W
Average active efficiency 73.76%
Efficiency at low load (10 %) 61.9%
No-load power consumption 0.05 W
Efficiency marking VI
Specifications may be modified without prior notice.

Subwoofer Anywhere 635
11
ENGLISH
7 Notification
7.1 Declaration of Conformity
Hereby, Marmitek BV, declares that this
Subwoofer Anywhere 635 is in compliance with the
essential requirements and other relevant
provisions of the following Directives:
Directive 2014/53/EU of the European Parliament and of the
Council of 16 April 2014 on the harmonisation of the laws of the
Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
Directive (EU) 2017/2102 of the European Parliament and of the
Council of 15 November 2017 amending Directive 2011/65/EU on
the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying
down eco-design requirements for external power supplies
pursuant to Directive 2009/125/EC of the European Parliament
and of the Council and repealing Commission Regulation (EC) No
278/2009.
You can read the Declaration of Conformity at
http://www.marmitek.com

© MARMITEK
12
7.2 Recycling
Environmental Information for Customers in the
European Union and other European countries with
separate collection systems.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. It is your responsibility to
dispose of this and other electric and electronic equipment via
designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human
health. For more detailed information about the disposal of your
old equipment, please contact your local authorities, waste
disposal service, or the shop where you purchased the product.
7.3 Copyrights
Marmitek is a trademark of Germatron B.V.
Subwoofer Anywhere 635™ is a trademark of Marmitek B.V. All
rights reserved. Every effort has been made to ensure that the
information in this manual is accurate. Marmitek is not responsible
for printing or clerical errors. Copyright and all other proprietary
rights in the content (including but not limited to model numbers,
software, audio, video, text and photographs) rests with Marmitek
B.V. Any use of the Content, but without limitation, distribution,
reproduction, modification, display or transmission without the
prior written consent of Marmitek is strictly prohibited. All copyright
and other proprietary notices shall be retained on all
reproductions. Other company and product names mentioned
herein may be trademarks of their respective companies. Mention
of third-party products is for informational purposes only and
constitutes neither an endorsement nor a recommendation.
Marmitek assumes no responsibility with regard to the
performance or use of these products.
Marmitek BV - PO Box 4257 - 5604 EG Eindhoven
The Netherlands

Subwoofer Anywhere 635
13
DEUTSCH
1 Inhaltsverzeichnis
1 Inhaltsverzeichnis................................................................... 13
2 Sicherheitshinweise ............................................................... 14
3 Ihr Produkt ............................................................................. 15
3.1 Einführung.............................................................................. 15
3.2 Verpackungsinhalt.................................................................. 16
3.3 Subwoofer anywhere 635 anschlüsse .................................... 16
3.4 Installation des Subwoofer Anywhere 635 senders ................ 17
3.5 Installation des Subwoofer Anywhere 635 empfängers .......... 17
3.6 Zusätzlicher empfänger.......................................................... 17
4 Häufig gestellte Fragen (FAQs).............................................. 18
5 Technische daten................................................................... 20
6 Hinweis .................................................................................. 21
6.1 Konformitätserklärung ............................................................ 21
6.2 Recycling ............................................................................... 21
6.3 Urheberrechte ........................................................................ 22

© MARMITEK
14
2 Sicherheitshinweise
Lesen Sie diese Gebrauchsanleitung sorgfältig durch, bevor
Sie das Gerät in Betrieb nehmen und bewahren Sie diese
Anleitung bitte für eventuelle, spätere Bedarfsfälle auf.
•Ausschließlich für Verwendung in Innenräumen.
•Dieses Produkt nicht in einer feuchten Umgebung oder nahe
Wasserquellen verwenden.
•Setzen Sie dieses Produkt nicht extrem hohen oder
niedrigen Temperaturen, starken Lichtquellen und direkter
Sonneneinstrahlung aus.
•Dieses Produkt ist kein Spielzeug. Außer Reichweite von
Kindern halten.
•Um Gehörschäden zu vermeiden, sollten Sie nicht über
längere Zeit mit großer Lautstärke hören!
•Entfernen Sie den AC/DC Speisungsadapter aus der
Steckdose, wenn Sie das Gerät längere Zeit nicht nutzen.
•Schließen Sie niemals einen Netzadapter oder ein Netzkabel
an, wenn diese beschädigt sind. In diesem Fall nehmen Sie
Kontakt mit Ihrem Lieferanten auf.
•Das Produkt niemals öffnen: Das Gerät kann Teile enthalten,
worauf lebensgefährliche Stromspannung steht.
•Überlassen Sie Reparaturen oder Wartung nur Fachleuten.
•Bei einer zweckwidrigen Verwendung, selbst angebrachten
Veränderungen oder selbst ausgeführten Reparaturen
verfallen alle Garantiebestimmungen.
•Marmitek übernimmt bei einer falschen Verwendung des
Produkts oder bei einer anderen Verwendung des Produktes
als für den vorgesehenen Zweck keinerlei Produkthaftung.
•Marmitek übernimmt für Folgeschäden keine andere Haftung
als die gesetzliche Produkthaftung.

Subwoofer Anywhere 635
15
DEUTSCH
3 Ihr Produkt
3.1 Einführung
Herzlichen Glückwunsch zum Erwerb des Marmitek
Subwoofer Anywhere 635. Der Subwoofer Anywhere 635 setzt
sich aus einem Sender und einem Empfänger zusammen. Das
Signal wird auf 2,4 GHZ ausgestrahlt und kann somit durch
Wände und Decken hindurch empfangen werden.
Mit dem Sender/Empfänger können Audiosignale drahtlos
übersendet werden.
Digitaler drahtloser Subwoofer Sender
Stellen Sie Ihren Subwoofer an jedem beliebigen Ort auf.
Der Subwoofer wird drahtlos an Ihren Surround Verstärker
oder Fernseher angeschlossen.
Wählen Sie den besten Ort für Ihren Subwoofer, ohne lose
liegende Audiokabel im Wohnzimmer.
Arbeitet mit allen aktiven Subwoofer Marken zusammen.
Drahtlose digitale Technik ermöglicht störungsfreie
Übertragung ohne jeglichen Qualitätsverlust.
Einfacher Anschluss und dank automatischer EIN/AUS
Funktion ohne nachzudenken zu verwenden; sogar die
Stand-by Funktion Ihres Subwoofers bleibt gewährleistet.
Sie können den Subwoofer Output Ihrer Surround Systems über
den Subwoofer Anywhere 635 an den LFE Anschluss Ihres
aktiven Subwoofers anschließen, ohne dass sich Ihr Subwoofer
nahe Ihres Surround Systems befinden muss.
Der Subwoofer Anywhere 635 hat eine Reichweite von ca. 10
Metern, sodass Sie Ihren Subwoofer im selben Raum an jedem
beliebigen Ort aufstellen können. .

© MARMITEK
16
3.2 Verpackungsinhalt
1 x Subwoofer Anywhere 635 Sender
1 x Subwoofer Anywhere 635 Empfänger
2 x Mini USB Kabel
2 x USB Netzteil
2 x Mini Buchsenanschluss zum Cinch Übergangskabel, Mono
2 x Mini Buchsenanschluss zum Cinch Übergangskabel, Stereo
1 x Gebrauchsanleitung Englisch, Deutsch, Französisch,
Spanisch, Italienisch, Niederländisch
3.3 Subwoofer anywhere 635 anschlüsse
1. Mute-Schaltung
2. Mini USB Port für die Speisung
3. EIN/AUS Schalter
4. Verbindung LED. Leuchtet grün, wenn Verbindung
hergestellt ist. Blinkt, wenn keine Verbindung hergestellt ist.
Ist aus, wenn der Sender/Empfänger ausgeschaltet ist.
5. Speisungs-LED. Leuchtet rot, wenn der Sender/Empfänger
Strom empfängt.
6. Audioeingang
7. Audioausgang

Subwoofer Anywhere 635
17
DEUTSCH
3.4 Installation des Subwoofer Anywhere 635 senders
Schließen Sie den Sender an den Subwoofer Ouput Ihres
Surround Systems oder Fernsehers an.
1. Verwenden Sie das enthaltene Übergangskabel, um den
Subwoofer Anywhere 635 Sender an den Subwoofer Output
Anschluss Ihrer Stereoanlage anzuschließen.
2. Schließen Sie den Adapter an den Mini USB-Port an und
verbinden Sie den Adapter mit der Steckdose. Die rote LED
leuchtet nun auf.
3. Der Subwoofer Anywhere 635 Sender wird sich nun
automatisch einschalten und die grüne LED beginnt zu
blinken.
4. Schalten Sie Ihre Audioquelle ein.
3.5 Installation des Subwoofer Anywhere 635
empfängers
1. Verwenden Sie das enthaltene Übergangskabel, um den
Subwoofer Anywhere 635 Empfänger an den LFE/LINE IN
Cinch (Cinch, RCA) Anschluss Ihres aktiven Subwoofers
anzuschließen.
2. Schließen Sie den Adapter an den Mini USB-Port an und
verbinden Sie den Adapter mit der Steckdose. Die rote LED
leuchtet nun auf.
3. Der Subwoofer Anywhere 635 Empfänger wird sich nun
automatisch einschalten und die grüne LED beginnt zu
blinken.
Sender und Empfänger suchen nun Verbindung miteinander und
Sie hören den Ton des Subwoofers auf dem am Empfänger
angeschlossenen, aktiven Subwoofer. Die grüne LED hört auf zu
blinken und leuchtet nun kontinuierlich.
3.6 Zusätzlicher empfänger
Zusätzlicher Empfänger für Ihren Subwoofer Anywhere 635.
Mit einem extra Empfänger können sie an mehreren Stellen im
Haus das Signal des Senders empfangen.

© MARMITEK
18
4 Häufig gestellte Fragen (FAQs)
Ich kann meinen Subwoofer Anywhere 635 nicht verbinden.
Achten Sie auf Nachfolgendes:
1. Überprüfen Sie, ob der Netzadapter angeschlossen ist und
die Speisungs LED (5) leuchtet (rot).
2. Halten Sie einen Abstand unter 10 Metern zwischen Sender
und Empfänger ohne große, im Weg stehende Hindernisse
ein.
3. Prüfen Sie, ob die Verbindungs-LED (4) leuchtet (nicht
blinkt). Drücken Sie auf den EIN/AUS Schalter (3), falls diese
ausgeschaltet sein sollte.
Mein aktiver Subwoofer bleibt still
Überprüfen Sie, ob das Audiokabel richtig angeschlossen ist
(LFE/LINE IN), der richtige Ausgang auf Ihrer Stereoanlage
gewählt wurde und der Ton Ihrer Stereoanlage auf das
gewünschte Niveau eingestellt ist.
Prüfen Sie, ob Sender oder Empfänger auch nicht auf Mute
steht.
Überprüfen Sie, ob Ihre Audioanlage wirklich Surround
wiedergibt und zum Beispiel nicht nur Stereo-Ton auf Ihren
Frontlautsprechern.
Kann ich meinen passiven Subwoofer auch unmittelbar an
den Empfänger anschließen?
Um Ton und Musik zu empfangen, schließen Sie den Empfänger
an einen aktiven Subwoofer (mit eingebautem Verstärker) an. Sie
können einen passive Subwoofer nicht unmittelbar an den
Empfänger anschließen.

Subwoofer Anywhere 635
19
DEUTSCH
Mein Verstärker hat keinen LFE Ausgang
Sie können auch das enthaltene Stereo Cinch-Übergangskabel
nutzen und den PRE OUT L+R Ausgang Ihres Verstärkers
verwenden.
Kann ich mehrere Subwoofer anschließen?
Ja, es können mehrere Empfänger mit dem Sender verbunden
werden, sodass Sie mehrere Subwoofer an verschiedenen Orten
aufstellen können.
Warum ist eine drahtlose Lösung geeigneter?
Wenn Sie für den Anschluss zwischen Verstärker und Subwoofer
ein langes Cinch-Kabel verwenden, besteht die hohe
Wahrscheinlichkeit eines Brummtons Davon sind Sie mit einer
drahtlosen Lösung nicht betroffen.
Kann ich das USB Kabel meines Senders/Empfängers auch
an einen USB Anschluss beispielsweise meines Verstärkers
oder Fernsehers anschließen?
Ja, das ist möglich. Der Anschluss wird jedoch nur für die
Speisung Ihres Subwoofer Anywhere 635 genutzt. Der
Sender/Empfänger schaltet sich dann automatisch mit dem
Verstärker oder Fernseher ein und aus (Auto Power On).
Sie haben noch Fragen, die im Obigen nicht beantwortet wurden?
Schauen Sie dann auf www.marmitek.com

© MARMITEK
20
5 Technische daten
Speisung 5V 500mA durch Mini USB
Stromverbrauch <2W
LED's Power, Link
RF AV Datenübertragung digital
Pairing Automatisch
RF Datenrate Bis zu 2 Mbps, GFSK
Frequenzumtastung
Audio-Frequenzbereich 20Hz ~ 48KHz
Audio Ein-/Ausgang Cinch, Mono und Stereo.
Reichweite bis zu 40m freies Feld, bis zu
10m durch Wände und
Decken hindurch.
RF Frequenz 2,4 GHz
Umgebungstemperatur 0 ~ +50°C (in Betrieb)
-20°C bis +70°C
(Lagertemperatur)
Gewicht 20 Gramm
Maße 61 x 51 x 12 mm
Netzteil
Eingangsspannung 100-240 VAC
Eingangs-Wechselstromfrequenz 50-60 Hz
Ausgangsspannung 5,0 V
Ausgangsstrom 0,5 A
Ausgangsleistung 2,5 W
Durchschnittliche aktive Effizienz 73.76%
Wirkungsgrad bei niedriger Last (10 %) 61.9%
Leistungsaufnahme bei Nulllast 0,05 W
Effizienzkennzeichnung VI
Angaben können ohne vorherige Mitteilung geändert werden.
Other manuals for Subwoofer Anywhere 635
1
Table of contents
Languages:
Other Marmitek Subwoofer manuals