Marmitek WHE-1 User manual

Marmitek WHE-1
User manual
Gebrauchsanleitung
Guide utilisateur
Modo de empleo
Manuale d’istruzioni
Gebruiksaanwijzing
3
19
35
51
67
83
ai16854565795_1_VZ_20230530_UG_124x176mm_80g_Marmitek_WHE-1.pdf 1 30-5-2023 16:22:59

© MARMITEK
2

Marmitek WHE-1™
3
ENGLISH
1 Table of contents
1 Table of contents ................................................................................................... 3
2 Safety instructions.................................................................................................. 4
3 Your product .......................................................................................................... 5
3.1 Introduction............................................................................................................ 5
3.2 Benefits.................................................................................................................. 5
3.3 Package contents .................................................................................................. 6
4 Getting started ....................................................................................................... 7
4.1 Installation tips ....................................................................................................... 7
4.2 Connecting an HD transmitter ................................................................................ 7
4.3 Connecting an HD receiver .................................................................................... 8
4.4 Connecting infrared return...................................................................................... 8
4.4.1 Placement of IR receiver ......................................................................... 9
4.4.2 Placement of IR led............................................................................... 10
4.4.3 Testing the IR return function ................................................................ 10
4.5 Connecting the USB extension............................................................................. 11
4.5.1 To the HD transmitter ............................................................................ 11
4.5.2 To the HD receiver ................................................................................ 11
4.5.3 Testing the USB extension function....................................................... 11
5 Use ...................................................................................................................... 12
5.1 HD transmitter and HD receiver ........................................................................... 12
5.2 Status of the lights ............................................................................................... 13
5.3 Watching TV or a film on smartphone/tablet......................................................... 14
5.4 Watching TV or a film on a smartphone with VR glasses...................................... 15
6 Product details ..................................................................................................... 15
6.1 Technical specifications ....................................................................................... 15
7 Frequently asked questions (FAQs) ..................................................................... 16
8 Notification........................................................................................................... 18
8.1 Declaration of Conformity..................................................................................... 18
8.2 Recycling ............................................................................................................. 18
8.3 Copyrights............................................................................................................ 18

© MARMITEK
4
2 Safety instructions
Please read these instructions thoroughly before you use the device and keep them for
future reference.
•Only for indoor use.
•Do not use the product in a damp environment or near water.
•Do not expose the product to extremely high or low temperatures, strong light
sources or direct sunlight.
•This product is not a toy. Keep out of reach of children.
•Connect the adapter to the mains only after you have verified that the line voltage
corresponds to the value specified on the type plates.
•Never connect a power adapter if it's damaged. In such cases, please contact
your supplier.
•Disconnect the AC/DC power adapter from the mains when this device is not in
use for prolonged time.
•Never open the product: the device may contain parts with deadly voltage.
•Repairs or service should only be performed by qualified personnel.
•Improper use, self-installed modifications or repairs will void any and all
warranties.
•Marmitek does not accept any product responsibility for incorrect use of the
product or use other than for which the product is intended.
•Marmitek does not accept liability for any consequential damage other than the
legal product responsibility.

Marmitek WHE-1™
5
ENGLISH
3 Your product
3.1 Introduction
Congratulations on your purchase of the Marmitek WHE-1™!
You can now watch TV or a film in your bedroom, study or any other room without
laying any cabling. You can send the HD video signal from an HDMI source (for
example, your TV decoder) wirelessly to a second TV or projector in another room, and
continue to operate those remotely. You can connect a TV or projector to both the
transmitter and the receiver, enabling you to watch the same content in two rooms.
All our products are designed and manufactured to the highest quality requirements.
Please read this manual first and follow the instructions in order to fully enjoy the
possibilities of this product.
3.2 Benefits
•Wireless HDMI signal transfer (up to 50m) through walls and ceilings
without quality loss or noticeable lag.
•Supports video resolutions up to 1080p (Full HD)
•Watch your favourite TV programmes or films from your decoder, Media
Center PC or Blu-ray player in HD quality on a 2nd TV/projector or on
your smartphone/tablet (through a free app) anywhere in the home.
•Operate your AV equipment remotely using the infrared return feature.
•Connect your keyboard and mouse to the receiver to control your PC
remotely.
•Loopthrough enables you to watch the same content at two locations
simultaneously.
•Supports HDCP and is fully compatible with all HDMI versions.

© MARMITEK
6
3.3 Package contents
A. 1 x HD transmitter
B. 1 x HD receiver
C. 1 x IR receiver cable
D. 1 x IR led extender cable
E. 2 x HDMI cable
F. 1 x Micro USB cable
G. 2 x Power adapter
H. 1 x User manual

Marmitek WHE-1™
7
ENGLISH
4 Getting started
4.1 Installation tips
•First, turn off all devices (TV and HDMI sources) before connecting them to the
Marmitek WHE-1™. If a device cannot be turned off, please remove its plug from
the wall socket.
•For the best picture and sound quality, only use High Speed HDMI® certified
cables.
•Please be careful when connecting your HDMI cables. These damage easily.
4.2 Connecting an HD transmitter
The transmitter sends the HD video signal wirelessly to the receiver in another room.
Therefore, place the transmitter near your HDMI source (for example: a digital TV
decoder, Blu-ray player, Media Player, Media Center PC/laptop or hard disk recorder).
1. Use an HDMI cable to connect the HDMI source to the HDMI port marked “HDMI
IN” on the HD transmitter.
2. Optional: To continue watching TV in this room as well, use an HDMI cable (not
supplied) to connect a TV to the HDMI port marked "HDMI OUT".
3. Connect the power adapter to the connector marked "POWER" and insert the
plug into the wall socket.

© MARMITEK
8
4.3 Connecting an HD receiver
Place the receiver in the room (bedroom, study or other
room) where you want to connect the second TV or projector.
1. Use an HDMI cable to connect your TV or projector to the HDMI port marked
“HDMI OUT” on the HD receiver.
2. Connect the power adapter to the connector marked "POWER" and insert the
plug into the wall socket.
4.4 Connecting infrared return
The Marmitek WHE-1™ has a built-in “infrared return feature"
that enables continued operation of the connected HDMI sources
from another room. For example, operate your HDMI source downstairs from your
bedroom (location of second TV).

Marmitek WHE-1™
9
ENGLISH
4.4.1 Placement of IR receiver
The IR receiver receives the commands sent by your (infrared) remote control and
sends these to the IR led, enabling you to operate your connected HDMI sources.
•Connect the IR receiver cable (1) to the HD receiver, using the connector marked
“IR''.
•Install the IR receiver so it can receive the transmitted commands from your
(infrared) remote control (max. 10 metres from the remote control).
•The most logical place for the IR receiver is near your
second TV or projector.
•Using the self-adhesive strip, placement is possible virtually
anywhere.
•Please experiment with correct placement before final
attachment of the IR receiver.
Please note! The adhesive strip may cause discolouration on certain surfaces,
or leave adhesive residues after removal.

© MARMITEK
10
4.4.2 Placement of IR led
The IR led receives the commands sent by the IR receiver and forwards them to your
connected HDMI sources.
•Connect the IR led extender cable (2) to the HD transmitter's connector marked
“IR''.
•Make sure that the led of the IR extender cable is attached exactly over the HDMI
source's infrared sensor (with some equipment, this needs to be done very
precisely). The exact position can be found easily by shining a torch on the front
panel, searching for the IR sensor window.
•Please experiment with correct placement before final attachment of the IR led.
Please note! The adhesive strip may cause discolouration on certain surfaces,
or leave adhesive residues after removal.
4.4.3 Testing the IR return function
Once you have connected the IR receiver and IR led extension cables according to the
above description, it is recommended to test the function first.
•Aim your remote control towards the IR receiver and send a command.
•The IR Receiver will now send this command to the transmitter through the
receiver.
•The transmitter will forward this command to the IR led.
•The IR led then forwards the command to the HDMI source.
•The HDMI source should now execute the function associated with the command
sent by your remote control.

Marmitek WHE-1™
11
ENGLISH
4.5 Connecting the USB extension
In addition to an infrared return feature, the Marmitek WHE-1™ also features a built-in
USB extension function. This helps you to continue to operate connected HDMI
sources, such as a Media Center PC or laptop, from another room, using a mouse
and/or keyboard.
4.5.1 To the HD transmitter
Using the included Micro USB cable, connect your PC or laptop to the Micro USB
socket marked “USB” on the HD transmitter.
4.5.2 To the HD receiver
Connect your mouse and/or keyboard to the connectors marked “USB” on the HD
receiver.
4.5.3 Testing the USB extension function
Once you have connected the Micro USB cable and your mouse/keyboard according to
the above description, it is recommended to test the feature first.
•Take your mouse/keyboard and use one of the functions.
•The HD receiver will now send this function to the HD transmitter.
•The HD transmitter will now forward this function to the Media Center PC or
laptop.
•The Media Center PC or laptop should now execute the function of your
mouse/keyboard.

© MARMITEK
12
5 Use
5.1 HD transmitter and HD receiver
1. Turn ON the second TV or projector and select the correct HDMI input to which
the HD receiver is connected.
2. Turn ON the HDMI source.
3. Use the switch at the back to turn ON the HD transmitter and HD receiver.
4. During system startup (60 sec.) a startup screen will appear on the HD transmitter
and the orange ''LINK'' light on both the HD transmitter and the HD receiver will
flash until the signal connection between the two has been established.
5. When the connection is established and the HDMI source is properly connected, a
video signal will appear on the (second) TV.
6. With proper operation, the green ''WIRELESS'' light will flash, the orange ''LINK''
light will be lit continuously and the ''INPUT/OUTPUT'' light will be solid blue.
7. If no video signal appears, check the lights according to the overview in section
5.2.
Please note: To be able to watch TV locally (via the HDMI output of the transmitter),
the HD transmitter should always be switched on.

Marmitek WHE-1™
13
ENGLISH
5.2 Status of the lights
1. WIRELESS light
•Slowly flashing green: Little data transmission
•Rapidly flashing green: Lot of data transmission
•OFF: HD transmitter/HD receiver is OFF
2. LINK light
•Orange: Good connection between the HD transmitter and HD receiver (or
smartphone/tablet)
•Flashing orange: HD transmitter and HD receiver searching for connection and/or
no or a non-supported HDMI signal is presented to the HD transmitter such as a
wrong video resolution (see FAQ).
•OFF: Transmitter/receiver is OFF
3. INPUT/OUTPUT light
•Blue: The HD receiver is correctly connected to the TV and a supported HDMI
signal is presented to the transmitter.
•Red: No or a non-supported HDMI signal is presented to the transmitter.
•OFF: HD transmitter/HD receiver is OFF
Properly operated, the green ''WIRELESS'' light will flash, the orange ''LINK'' light will
be lit continuously and the ''INPUT/OUTPUT'' light will be solid blue.

© MARMITEK
14
5.3 Watching TV or a film on smartphone/tablet
The Marmitek WHE-1 also enables you to create your own content to watch on a
smartphone/tablet, using the accompanying TV Anywhere app (iOS and Android).
Use the following steps to create a direct connection to your smartphone/tablet.
1. Download the TV Anywhere app in the App Store (iOS) or the Google Play Store
(Android).
2. For this function, you only need the set's HD transmitter. The HD receiver may
therefore remain OFF. After you have switched ON the HD transmitter, it will act
as a Wi-Fi access point after approx. 40 seconds.
3. Go to the settings menu of your smartphone/tablet, connect to the Wi-Fi network
with the name ''TX******TX'' and use password: 12345678
4. Now, start the TV Anywhere app to be able to enjoy your own content.
Please note: Once your smartphone/tablet is connected to the transmitter's Wi-Fi
network, the internet connection on your smartphone/tablet will be inactive. You will still
receive phone calls and text messages.
When you have finished watching TV or a film on your smartphone/tablet and want to
restore the use of an internet connection, return to the settings menu of your
smartphone/tablet and reconnect with your own Wi-Fi network. You can also achieve
this by turning off the transmitter.
Please note: To be able to also watch TV locally (via the HDMI output of the HD
transmitter), the HD transmitter should always be switched on.

Marmitek WHE-1™
15
ENGLISH
5.4 Watching TV or a film on a smartphone with VR glasses
The TV Anywhere app also has a feature where the image can be split in 2 parts. This
allows you to watch your own content via the transmitter and your smartphone using
VR (Virtual Reality) glasses for an even nicer experience.
When you want to use VR glasses, you can use the symbol in the upper left corner of
the screen to split the picture into different formats, matching your smartphone and VR
glasses.
•Clicking the symbol successively enables you to change the setting.
•The symbol will disappear when you keep it clicked.
•The symbol will re-appear when you click once on its previous position.
6 Product details
6.1 Technical specifications
Video
Supported resolutions 1080p@50/60Hz, 1080i, 720p, 576p and 480p
Supported PC resolutions max. 1920 x 1080@60Hz
HDMI standards HDMI, DVI, EDID and HDCP
Technology
Operational frequency 2.4 GHz
Range Up to 200 metres clear field and up to 50
metres through floors and walls
Latency (lag) <100ms
Transmitter
HDMI input 1 x HDMI (19-pin female)
HDMI output 1 x HDMI (19-pin female)
IR led connector 1 x 3.5mm jack
USB connector 1 x Micro-USB (PC, laptop)
Dimensions (L x W x H) 140 x 84 x 22 mm
Weight 176 g
Receiver
HDMI output 1 x HDMI (19-pin female)
IR receiver connector 1x3.5mm jack
USB connector 2 x USB-A (mouse, keyboard)
Dimensions (L x W x H) 140 x 84 x 22 mm
Weight 176 g

© MARMITEK
16
Audio
Supported audio 2CH PCM stereo
Infrared return function
Frequency range 30 ~ 60kHz
Environment
Ambient temperature 0 ~ 40° C
Humidity 20% ~ 90%
Power supply
External power adapter 100-240VAC @50-60Hz, 5VDC @ 2A
Specifications may change without prior notice.
7 Frequently asked questions (FAQs)
Tip: Testing over a long distance is difficult. First, place the HD transmitter and the HD
receiver in the same room (minimum 2 metres apart) to test if everything works and
only then place the HD receiver in another room.
No (or poor) image and sound on TV or projector
•Ensure that the ON/OFF switches at the back of the transmitter and receiver are
in the ''ON'' position.
•Ensure that all HDMI cables are connected properly or replace them.
•Ensure that all 3 LEDs on both the HD transmitter and the HD receiver are lit.
•Ensure that the HDMI source is turned ON and the correct HDMI input is selected
on the TV.
•Ensure that the HDMI source is set to a correct video resolution
(480p, 576p, 720p, 1080i or 1080p). If necessary, consult the user manual of your
HDMI source.
•Disconnect the power adapters from the wall socket and reconnect them to reboot
the Marmitek WHE-1.
No or bad connection between the HD transmitter and HD receiver
•Move the HD transmitter and/or the HD receiver from the immediate vicinity
of the connected HDMI sources and Wi-Fi equipment. These may affect the
range.
•Slightly adjusting the position of the HD transmitter and/or HD receiver may
already help out.
•Too much distance between HD transmitter and HD receiver. Try using shorter
distances.
•Disconnect the power adapters from the wall socket and reconnect them to reboot
the Marmitek WHE-1.

Marmitek WHE-1™
17
ENGLISH
I get no picture from the TV Anywhere app
•Move the HD transmitter from the immediate vicinity
of the connected HDMI sources and Wi-Fi equipment. These may affect the
range.
•Slightly adjusting the position of the HD transmitter may already help out.
•You are at the edge of its range. Try using shorter distances.
•Disconnect the power adapter from the wall socket and reconnect it to reboot the
HD transmitter.
•Turn the Wi-Fi on your smartphone/tablet on and off, and then try connecting to
the HD transmitter's Wi-Fi network again.
•Close the app manually and restart it.
I have no internet connection when using the app
•Once your smartphone/tablet is connected to the HD transmitter's Wi-Fi network,
the internet connection on your smartphone/tablet will be inactive. You will still
receive phone calls and text messages as usual.
•When you have finished watching a film on your smartphone/tablet and want to
restore the use of an internet connection, return to the settings menu of your
smartphone/tablet and reconnect with your own Wi-Fi network. You can also
achieve this by turning off the transmitter.
I do have picture, but no (or bad) sound
The Marmitek WHE-1 supports up to 2CH PCM stereo.
•Check the audio setting in the settings menu of the connected HDMI source and
manually set it to 2CH PCM stereo when the automatic setting does not work.
The IR return function is not working
•Ensure that you did not connect the IR receiver and IR led cable the wrong way
around, and that they are fully plugged in.
•Experiment with the location of the IR receiver and IR led cable.
•The IR receiver has a reception sensitivity of max. 10 metres.
•The range is also dependent on the remote control used.
Do you have any questions that are not answered here?
Then please visit www.marmitek.com

© MARMITEK
18
8 Notification
8.1 Declaration of Conformity
Hereby, Marmitek BV, declares that this Marmitek WHE-1™ is in
compliance with the essential requirements and other relevant provisions of
the following Directives:
Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014
on the harmonisation of the laws of the Member States relating to the making available
on the market of radio equipment and repealing Directive 1999/5/EC.
Directive (EU) 2017/2102 of the European Parliament and of the Council of 15
November 2017 amending Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down eco-design
requirements for external power supplies pursuant to Directive 2009/125/EC of the
European Parliament and of the Council and repealing Commission Regulation (EC)
No 278/2009.
You can read the full Declaration of Conformity at http://www.marmitek.com
8.2 Recycling
Environmental Information for Customers in the European Union and other
European countries with separate collection systems.
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. It is your
responsibility to dispose of this and other electric and electronic equipment via
designated collection facilities appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the
environment and human health. For more detailed information about the disposal of
your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
8.3 Copyrights
Marmitek is a trademark of Vogel’s Holding B.V. Every effort has been made to ensure
that the information in this manual is accurate. Marmitek is not responsible for printing
or clerical errors. Copyright and all other proprietary rights in the content (including but
not limited to model numbers, software, audio, video, text and photographs) rests with
Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction,
modification, display or transmission without the prior written consent of Marmitek is
strictly prohibited. All copyright and other proprietary notices shall be retained on all
reproductions. Other company and product names mentioned herein may be
trademarks of their respective companies. Mention of third-party products is for
informational purposes only and constitutes neither an endorsement nor a
recommendation. Marmitek assumes no responsibility with regard to the performance
or use of these products.
Marmitek BV - PO Box 4257 - 5604 EG Eindhoven
The Netherlands

TV Anywhere Wirelless HD ™19
1 Inhaltsverzeichnis
1 Inhaltsverzeichnis ................................................................................................ 19
2 Sicherheitshinweise ............................................................................................. 20
3 Ihr Produkt ........................................................................................................... 21
3.1 Einführung ........................................................................................................... 21
3.2 Produckt eigenschaften........................................................................................ 21
3.3 Verpackungsinhalt ............................................................................................... 22
4 Los geht’s ............................................................................................................ 23
4.1 Tipps zur Installation ............................................................................................ 23
4.2 HD Sender anschließen ....................................................................................... 23
4.3 HD Empfänger anschließen ................................................................................. 24
4.4 Infrarot-Rückkanal anschließen............................................................................ 24
Anbringung IR Empfänger..................................................................... 25
Anbringung IR LED ............................................................................... 26
Testen der IR Rückfunktion ................................................................... 27
4.5 USB Verlängerung anschließen ........................................................................... 27
An den HD Sender ................................................................................ 27
An den HD Empfänger .......................................................................... 27
USB Verlängerungsfunktion testen........................................................ 27
5 Inbetriebnahme .................................................................................................... 28
5.1 HD Sender und HD Empfänger............................................................................ 28
5.2 Status der Leuchten ............................................................................................. 29
5.3 TV oder Film auf Smartphone/Tablet sehen ......................................................... 30
5.4 Fernsehen oder Filme auf Ihrem Smartphone mit VR Brille genießen .................. 31
6 Technische Daten ................................................................................................ 31
7 Häufig gestellte Fragen (FAQs)............................................................................ 32
8 Hinweis ................................................................................................................ 34
8.1 Konformitätserklärung .......................................................................................... 34
8.1 Recycling ............................................................................................................. 34
8.2 Urheberrechte ...................................................................................................... 34

© MARMITEK
20
2 Sicherheitshinweise
Lesen Sie diese Gebrauchsanleitung sorgfältig durch, bevor Sie das Gerät in
Betrieb nehmen und bewahren Sie diese Anleitung bitte für eventuelle, spätere
Bedarfsfälle auf.
•Ausschließlich für Verwendung in Innenräumen.
•Dieses Produkt nicht in einer feuchten Umgebung oder nahe Wasserquellen
verwenden.
•Setzen Sie dieses Produkt nicht extrem hohen oder niedrigen Temperaturen,
starken Lichtquellen und direkter Sonneneinstrahlung aus.
•Dieses Produkt ist kein Spielzeug. Außer Reichweite von Kindern halten.
•Schließen Sie den Netzadapter erst dann an das Stromnetz an, nachdem Sie
überprüft haben, ob die Netzspannung mit dem auf dem Typenschild angegeben
Wert übereinstimmt.
•Schließen Sie niemals einen Netzadapter an, wenn diese beschädigt sind. In
diesem Fall nehmen Sie Kontakt mit Ihrem Lieferanten auf.
•Entfernen Sie den AC/DC Speisungsadapter aus der Steckdose, wenn Sie das
Gerät längere Zeit nicht nutzen.
•Das Produkt niemals öffnen: Das Gerät kann Teile enthalten, worauf
lebensgefährliche Stromspannung steht.
•Überlassen Sie Reparaturen oder Wartung nur Fachleuten.
•Bei einer zweckwidrigen Verwendung, selbst angebrachten Veränderungen oder
selbst ausgeführten Reparaturen verfallen alle Garantiebestimmungen.
•Marmitek übernimmt bei einer falschen Verwendung des Produkts oder bei einer
anderen Verwendung des Produktes als für den vorgesehenen Zweck keinerlei
Produkthaftung.
•Marmitek übernimmt für Folgeschäden keine andere Haftung als die gesetzliche
Produkthaftung.