marsden HM-201D User manual

USER MANUAL
HM-201D
Please take time to read these
instructions before starting
to use the scale
Version 1.2 01/19

Contents
Introduction 3
Product Specification 3
How to Install 5
Contact Information 6
Page 2

Thank you for purchasing a Marsden professional medical height measure. This is an
accessory to be used with the Marsden DP-3810 indicator.
Marsden’s policy is one of continuous development and therefore we reserve the right to
change product specification without notice.
Product Specification
Model
HM-201D
Measuring Range
120cm –200cm
Graduations
1mm
Stabilization Time
1 - 2 Seconds
Operating Temperature
0 to 40˚C
Dimensions (w x d x h)
1000mm x 75mm x 55mm
Page 3

The HM-201D Digital Height Measure is an optional accessory for the DP-3810
series. When the person being measured places the underside of the cursor on
top of their head the height measurement will be automatically displayed on the
screen of the DP-3810 indicator.
The automatic height measurement also enables the automatic calculation and
display of the Body Mass Index (BMI) of the measured person.
Page 4

How To Install The HM-201D
The connection point between the DP-3810 indicator and HM-201D is clearly
shown in the image below.
Insert the cable from the HM-201D height measure into the socket on the
underside of the DP-3810 indicator before use.
Page 5

Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Manufacturing and Distribution:
Unit 7, Centurion Business Park,
Coggin Mill Way,
Rotherham,
S60 1FB
Head Office:
Unit 1, Genesis Business Park,
Sheffield Road,
Rotherham
S60 1DX
www.marsden-weighing.co.uk