Martha Stewart Living TG70M3P31S00 User manual

Christmas Tree
Model# TG70M3P31S00
Sku # 1000 686 269
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use.When
products are used in outdoor applications, connect
the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a quali-
fied electrician for proper installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or
electric heaters, fireplaces, candles, or other similar
sources of heat.
e. Do not secure the wiring of the product with staples
or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any
wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h.This is an electric product and not a toy! To avoid risk
of fire, burns, personal injury and electric shock it
should not be played with or placed where small
children can reach it.
i. Do not use this product for other than its intended
use.
j. Do not hang ornaments or other objects from cord,
wire, or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire
insulation.
l. Do not cover the product with cloth, paper, or any
material that is not a part of the product when in
use.
m.This product has a polarized plug (one blade is
wider than the other) as a feature to reduce the risk
of electric shock.This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not use with an
extension cord unless plug can be fully inserted. Do
not alter or replace the plug.
n.This product is equipped with push-in type lamps.
Do not twist lamps.
o.This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
The outlet. Also unplug any additional strings or
products that may be attached to the product.
Replace the fuse as per the user servicing instruc-
tions (follow product marking for proper fuse rating)
and check the product.
p .Read and follow all instructions that are on the
product or provide with the product.
q. SAVE THESE INSTRUCTIONS
Pre-Assembly
Assembling the tree stand
Assembly
When using electrical products, basic precautions
should always be followed, including the following:
Part Description Quantity
C Tree bottom, tag 1 1
D Tree stand 1
A Tree top, tag 3 1
B Tree center, tag 2 1
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the
stand on the floor.
Step 3. Slide the locking disk of the tree stand (D) down
until it snaps into place.
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10
minutes!
Step 1. Remove the protective caps from the tree
bottom (C) and insert the pole into the tree
stand (D).
Step 2. Remove the protective caps from the tree
center (B) and insert the pole into the tree
bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by
working from the bottom to the top. When
adjusting branches, ensure that all wires are
free of branch hinges.
Step 5. Insert the green label extension cord plug into
the wall outlet. All your lights should now be lit.
Step 6. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
If your tree is Perfect Shape™ tree. It does not require
shaping. After removing the tree bands around the
tree, simply shake it to allow the branches to fall into
place. If desired, minor shaping can be done to create a
custom look. The tree is now ready to be decorated
and enjoyed.
Assembling the tree

Christmas Tree
Model# TG70M3P31S00
Sku # 1000 686 269
Operation
Turning on the tree
Maintenance
Use and Care Instructions
Spare parts
Repairing Loose Hinges
Troubleshooting
Problem Solution
The tree
does not
light
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with
the replacement fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement
bulbs provided
NOTE: If some bulbs do not light or flicker, search for
any loose plugs and/or broken, loose, or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together
and plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, fuse and
bulbs for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact
the Customer Service Team at 1-877-527-0313 between
the hours of 8 am and 5 pm EST, Monday through
Friday.
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclo-
sures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and
remove all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5.When storing the product, carefully remove the product
from wherever it is placed, including
tree, branches, or bushes, to avoid any
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the poles
to avoid damaging the internal parts.
6.When not in use, store neatly in a cool, dry location
protected from sunlight.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Fuse replacement
Step 1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
Step 2. Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
Step 3. Remove fuse carefully.
Step 4. Risk of fire. Replace fuse only
with 5 Amp, 125 Volt fuse for
the power cord set.
Step 5. Close fuse cover. Slide closed the
fuse access cover on top of
attachment plug.
Step 6. Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
SPARE
FUSE
User servicing instructions
Insert
Green Label
Plug Into Wall
Outlet
Section 3
Section 2
Section 1
S50
S100
S50
S100
S50
S100
Foot Pedal
on/off Switch
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
S100
S100
FUSED LAMP REPLACEMENT
WARNING - Risk of fire:Do not replace the fuse lamp
contained in this set with any other type of lamp, use only
spare fuse lamps provided with this product. In case of a
burnt out FUSED lamp, the entire series of 50 lamps will be
out.To replace the fused lamp:
1. Grasp the plug and remove
from the receptacle or other
outlet device. Do not unplug
by pulling the cord.
2. Locate the fused lamp with
gray color lamp holder. Pull
the burnt fused lamp
and plastic lamp base straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
Clear Plastic
Cover
Gray Lamp
Base
Gray Lamp
Holder