Martha Stewart Living TV70M3ACDL05 User manual

Christmas Tree
Model# TV70M3ACDL05
Sku # 1003 143 270
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should always
be followed, including the following:
Package Contents
Pre-Assembly
Part Description Quantity
B Tree center,Tag 2 1
A Tree top 1
DTree pot 1
C Tree center,Tag 1 1
Section 2
Tree top
Section 1
Adaptor
To Be Plugged
Into Wall
Outlet
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi
al that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not
twist lamps.
n. Read and follow all instructions that are on the product
or provide with the product.
o. SAVE THESE INSTRUCTIONS
Step 1. Grasp the power adaptor or power cord plug, and than
unplug from the power outlet.Do not pull the power cord.
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
( Reference figure only)
USER SERVICING INSTRUCTIONS
LAMP REPLACEMENT
Assembly
Step 1 . Choose a location near a wall outlet.
Step 2 . Unfold the legs of the tree stand and lay the stand
on the floor.
Step 3 . Slide the locking disk of the tree stand down until it
snaps into place.
Assembling the tree
Step 1 . Remove the protective caps from the tree bottom
and insert the pole into the tree stand.
Step 2 . Continue by inserting the upper tree section(s) to
the lower section(s) until inserting the tree top.
Step 3 . Shape the branches to your preference by working
from the bottom to the top. When adjusting branches,
ensure that all wires are free of branch hinges.
Step 4 . Insert the adaptor into the wall outlet. All your lights
should now be lit.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 6 . When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Assembling the tree stand
Top view Side view

Christmas Tree
Model# TV70M3ACDL05
Sku #1003 143 270
Maintenance
Spare parts
This tree package includes bulbs for any replacement or repair that you
need to perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the hours of 8 am
and 5 pm EST, Monday through Friday.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall and then unplug each section of
the tree.
Step 3. Gently lift the tree top straight up to remove from the body
section and fold all branches towards the pole.
Step 4. Repeat this step for the body section.
Step 5. Carefully place all tree sections into a shipping box and tape it shut.
Step 6. Do not store tree in a damp area or in an area where the
temperature exceeds 100° F.
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Connect the light strings of the tree together and plug the adaptor into
a wall outlet.
Troubleshooting
Problem Solution
The tree does not
light
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided