Martha Stewart Living TV30P4598C00 User manual

Christmas Tree
Model# TV30P4598C00
Sku # 1001 338 148
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor and outdoor use.The electrical rating
is 0.17A 120V 60Hz.
c. This seasonal product is not intended for permanent installation
or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
f. Do not let lamps rest on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from wire, or light
string.
k. Do not close doors or windows on the product as this may
damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that
is not a part of the product when in use.
m.Read and follow all instructions that are on the product or
provided with the product.
n. SAVE THESE INSTRUCTIONS
Pre-Assembly
When using electrical products, basic precautions should always
be followed, including the following:
Part Description Quantity
C Tree pot 1
A Tree top 1
B Tree center, Sticker 1 1
Tree top
Section 1
S50
Assembly
Assembling the tree
Step 1. Choose a location near a wall outlet.
Step 2. Insert the tree top(A) into the trunk of the main body(B).
Step 3. Insert whole tree into the weighted pot (C).
Step 4. Shape the branches. Shift branches to fill any gaps, lightly
upsweep all branch tips for a uniform look. Your tree is
now ready to decorate.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 6. Insert green label plug into the wall outlet.
Top view Side view
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Maintenance
Spare parts
This tree package includes bulbs and fuse for any replacement or
repair that you need to perform on your tree. If extra parts are
needed, contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday through Friday.

Christmas Tree
Model# TV30P4598C00
Sku # 1001 338 148
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall and then unplug each
section of the tree.
Step 3. Gently lift the tree top straight up to remove from the
body section and fold all branches towards the pole.
Step 4. Repeat this step for the body section.
Step 5. Carefully place all tree sections into a shipping box and
tape it shut.
Step 6. Do not store tree in a damp area or in an area where the
temperature exceeds 100° F.
The tree
does not
light
Troubleshooting
Problem Solution
Ensure that all tree sections are plugged into
each other and that the tree is plugged into the
wall. If your tree came with a foot pedal, step on
the On/Off button.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
For blown fuses (if applicable), please refer to
User Servicing Instructions – Fuse Replacement
and replace as instructed.