Martha Stewart Living TG76P4417S01 User manual

Christmas Tree
Model: TG76P4417S01
Sku # 714 954
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use.When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installa-
tion.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or exten-
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m.This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Do not use with an extension cord unless plug
can be fully inserted. Do not alter or replace the plug.
n.This product is equipped with push-in type lamps. Do not
twist lamps.
o.This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Also
unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper
fuse rating) and check the product.
p .Read and follow all instructions that are on the product or
provide with the product.
q. SAVE THESE INSTRUC TIONS
Package Contents
Pre-Assembly
Assembling the tree stand
Assembly
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the stand
on the floor.
Step 3. Slide the locking disk of the tree stand (D) down until
it snaps into place.
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
Section 4
Section 3
Section 2
Section 1
Insert
Green Label
Plug Into Wall
Outlet
S100
S100
S50
S50
S100
S100
S100
S50
S100
S100
Foot Pedal
on/off Switch
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
S100
S100
S50
This tree assmebles with Quick Set® technology ---Set up
and light up your tree in less than 10 minutes!
Step 1.Remove the protective caps from the tree bottom (D)
and insert the pole into the tree stand (E).
Step 2.Remove the protective caps from the tree center 2 (C)
and insert the pole into the tree bottom (D).
Step 3.Remove the protective caps from the tree center 1 (B)
and insert the pole into the tree center 2 (C).
Step 4.Insert the tree top (A) into the tree center 1 (B).
Step 5.Shape the branches to your preference by working
from the bottom to the top. When adjusting branches,
ensure that all wires are free of branch hinges.
Step 6.Insert the green label extension cord plug into the wall
outlet. All your lights should now be lit.
Step 7.When finished shaping the branches, slightly upsweep
all branch tips for a uniform look.
Assembling the tree
Part Description Quantity
A Tree top, tag 4 1
B Tree center 1, tag 3 1
C Tree center 2, tag 2 1
D Tree bottom, tag 1 1
E Tree stand 1

Operation
Turning on the tree
Maintenance
Spare parts
Repairing Loose Hinges
Troubleshooting
Problem Solution
The tree does
not light
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall. If your tree came
with a foot pedal, step on the On/Off
button.
Check for blown fuses at the light string
and power cord plugs. Replace as
needed with the replacement fuses
provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, bulbs, and
fuses for any replacement or repair that you need to perform
on your tree. If extra parts are needed, contact the Customer
Service Team at 1-877-527-0313 between the hours of 8 am
and 5 pm EST, Monday through Friday.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclosures,
loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove
all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5.When storing the product, carefully remove the
product from wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the
poles to avoid damaging the internal
parts.
6.When not in use, store neatly in a cool, dry location
protected from sunlight.
WARNING - Risk of fire:This product employs overload
protection (fuse lamp) in each series light circuit to provide
overload protection in addition to the fuse(s) located in the
plug. Do not replace the fuse lamp contained in this set with
any other type of lamp, use only spare fuse lamps provided
with this product. In case of a burnt out FUSED lamp, the
entire series of 50 lamps will be out.To replace the fused
lamp:
1. Grasp the plug and remove from
the receptacle or other outlet
device. Do not unplug by pulling
the cord.
2. Locate the fused lamp with gray
color lamp holder. Pull the burnt
fused lamp and plastic lamp base
straight out of the lamp holder.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Christmas Tree
Model: TG76P4417S01
Sku # 714 954
3. Replace with a spare fused lamp.The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse
only with 5, 7 or 10 Amp, 125 Volt
fuse for the power cord set.
5. Close fuse cover. Slide closed
the fuse access cover on
top of attachment plug.
6. Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
SPARE FUSE
User servicing instructions
Fused Lamp Replacement
Fuse replacement