Martin Jerry US-STD-TC01 User manual

1
User Manual
3Way Smart Dimmer Switch
Contents
Part 1: General................................................................................. 2
1.1. Specification ........................................................ 2
1.2. Main Features ..................................................... 2
Part 2: Installation and Wire Connection.......................................... 3
Part 3: Connect the WiFi Dimmer Switch to Wi-Fi ............................ 5
Part 3: Connect the Dimmer Switch to Alexa.................................. 15
Part 4: Connect the Dimmer Switch to Google Home..................... 18

2
Part 1: General
1.1. Specification
Item
Description
Product Name
3Way Smart Dimmer Switch
Model
US-STD-TC01
Color
White
Voltage
100V-240VAC
Frequency
50-60Hz
Wattage
150W (LED)
1.2. Main Features
Works with Alexa & Google Assistant for voice control
ONLY compatible with 2.4G Wi-Fi, DO NOT use it under 5GHz
FREE iOS and Android App is available to control it anywhere
Set schedule and timing to automatically turn on/off
Manually turn on/off the switch by the Main Button
Dimmer : Dimmable LED, CFL, halogen & incandescent Bulbs
Restart
Button
Power Button
Dimmer Indicator
Dim Pad
Wi-Fi Button
Wi-Fi Indicator

3
Part 2: Installation and Wire Connection
Notice:
1. As the switch needs power for itself, three lines must
be connected (Live Line, Load Line and Neutral Line);
2. Please use the wire nuts to make the copper
conductors fully concealed;
3. If you really cannot find out a Neutral Line in your
Power line Socket, STOP installing the switch and
consult with a professional electrician or contact our
service team.

4
Step 1: Turn off power at the circuit breaker that controls the
light switch. Use voltage tester to confirm no voltage
is present.
Step 2: Remove existing faceplate and light switch, then
identify Live/Load, Neutral and Ground lines.
Step 3: Connect the Smart Switch wiring with the provided wire
connectors as follows:
Black wire on switch (Live Line) Live Line
White wire on switch (Neutral Line) Neutral line
Green wire on switch (Ground Line) Ground line
If use it as a Single Pole:
Red wire on switch (Load Line) Load line to light bulbs
Capped the Brown wire
If use it for 3-way:
Red & Brown wire on switch Travelers to slave switch
Please wrap electrical tape around the wire nuts to make
sure the copper conductor is fully concealed.

5
Part 3: Connect the 3Way Smart Dimmer Switch to Wi-Fi
Step 1: Download the App
Scan the QR code or search “Smart Life” in the App Store or
Google Play

6
Step 2: Register a New Account
Password must contain
6-20 letters and numbers
Register with phone number
or email address

7
Step 3: Turn on the power at the circuit breaker. Press the
Wi-Fi Button and then the Wi-Fi Indicator light flashes quickly in
Red.
Flash Quickly in Red: Paring Mode (EZ mode)
Constant Green Dimmer Indicator & Wi-Fi Indicator: Power
ON, Wi-Fi Connected
Constant Red Wi-Fi Indicator: Lost Wi-Fi Connection
Dimmer Indicator OFF: Power OFF
Step 4: Tap + to Add a device
in your App (Smartphone
should connect to 2.4GHz
Wi-Fi).
Step 5: Select “Dimmer
Switch”

8
Step 6: Select 2.4 GHz Wi-Fi
network and enter your
password. (Your phone
should have connected to the
same Wi-Fi first)
Step 7: Select Confirm and
tap Next.

9
Step 8: It will be added in
around 20 seconds.
-----If it fails,
try to reconnect and contact
the seller for help.
After the device is added,
Input a proper name and click
“Done”.
Simple Names will be easier
to be identified by Echo or
Google Home.

10
Step 9: The switch is
connected and you can
control it by this App. If you
need voice control, please
refer to Part 3 for Alexa, Part
4 for Google Assistant.
Congratulations! Now you
can turn on/off the smart
dimmer switch via App on
your smartphone.
If the above pairing method
(EZ mode) fails several
times,
Please try AP mode as
follows:

11
Step 10: Set the switch to
AP mode
1. Press the Wi-Fi button once
and you will see the indicator
blinks quickly.
2. Then press and hold the
Wi-Fi button for 5-8s until the
indicator blinks slowly.
Step 11: After “Step 6:
Select 2.4 GHz Wi-Fi network
and enter your password,”
Tap “EZ Mode” on the top right
and select “AP Mode”.

12
Step 12: Select Confirm and
tap Next.
Step 13: Connect your phone
to the device’s hotspot like
"Smart Life_xxxx".

13
Step 13: After selecting
hotspot like "Smart Life_xxxx"
in Wi-Fi setting page, go back
to the App and it will connect
automatically.
Step 14: It will be added in
around 20 seconds.
After the device is added,
Input a proper name and click
“Done”.

14
FQA:
1. Cannot download the
right App.
A: Please come back to step
1 and download by scanning
the QR code. Please use a
smartphone rather than tablet.
2. Cannot discover the
smart switch by App.
A: Make sure that your Wi-Fi
router is 2.4GHz;
DHPC is enabled in the
Wi-Fi router;
the phone connects to the
same Wi-Fi;
the Wi-Fi indicator flashes
quickly.
3. No light comes out from
the Main button/indicator
A: Please check the wire
connection and press the
restart button if necessary,
then the Wi-Fi Indicator
will blink quickly.

15
Part 3: Connect the Dimmer Switch to Alexa
Part 2 must be completed before doing this part 3
Step 1: Log in your Alexa
account on a smartphone
or a computer, then tap
Home Skills
Step 2: Search “Smart Life” and
select the right one according
the blue logo (same with App)

16
Step 3: Enable the skill
Step 4: Login the account you
registered on the App in Part 2,
then click “Link Now”
The account and password
should be the same as you
registered in the Smart Life
App.
DO NOT input your Alexa
account or use another
account.

17
Step 5: The Account is linked
successfully, and then tap
Authorize to Complete.
Congratulations!
Alexa Devices (Echo) can
control the Switch now.
To add or delete
switches, please delete or
add them in the Smart Life
App (see Part 2), and then
the Alexa will synchronize
automatically.
If you cannot see
the name of switches in the
Devices List in Alexa Page,
you can click “Discover” in
Alexa Page, it will
synchronize from the Smart
Life App.

18
NOTE:
If you want to control your smart devices through Amazon
Alexa. you should assign a name to switch. After naming to
your switch, Which name you assigned to your switch that
name should use in the command. For example, if you set the
switch name as “Bedroom light”, the supported voice
commands are as below:
"Echo, turn ON Bedroom light". (Bedroom light will ON)
"Echo, turn OFF Bedroom light". (Bedroom light will OFF)
"Echo, Set 50% to bedroom light". (Bedroom light brightness
will set to 50%).
"Echo, Set 70% to bedroom light". (Bedroom light brightness
will set to 70%).
Now you can control the smart device with Amazon Alexa.

19
Part 4: Connect the Dimmer Switch to Google Home
Part 2 must be completed before doing this part 4
Step 1: Find "Home Control" in the hamburger menu on the
Google Home app’s home page ->Home Control -> tap "+".

20
Step 2: Find "Smart Life" in
the list.
Step 3: Input your Smart
Life account and password
you registered in Part 2,
then tap "Link Now".