Master MSPG-6100L User manual

VIDEO SIGNAL GENERATOR
MSPG-6100L
USER MANUAL
Edition 1a

MASTER CO., LTD Programmable Video Signal Generator
2 page
COPYRIGHTⓒ2010 ALL RIGHT RESERVED, MASTER Co., Ltd
All copyrights pertaining to this manual are the property of MASTER CO., LTD.
This manual may not be copied in whole or in part without permission.
The contents of this manual are subject to change without prior notice due to improvements.
An incorrectly collated manual or a manual with missing pages will be replaced.

MASTER CO., LTD Programmable Video Signal Generator
3 page
CONTENTS
Chapter 1.
Introduction ································································································5
1.1 Notice for safe usage··················································································5
1.2 Product overview ························································································9
Chapter 2.
Concerning the MSPG-6100L························································10
2.1 Introduction·································································································10
2.2 Features ·····································································································11
2.3 Specifications······························································································13
2.4 Panel parts and their functions····································································16
Chapter 3.
Each signal parameter and output format ··························24
3.1 Timing parameters for each signal ······························································24
3.2 A Summary concept of TV signal ································································28
3.3 A Summary concept of HDMI signal····························································29
3.4 A Summary concept of DVI signal·······························································31
3.5 A Summary concept of D-TV signal ····························································33
3.6 A Summary concept of Displayport ·····························································34

MASTER CO., LTD Programmable Video Signal Generator
4 page
Chapter 4.
MSPG-6100L main operation·························································35
4.1 Initial Screen·······························································································35
4.2 Password Function ·····················································································36
4.3 Pattern Call and Edit Functions···································································37
4.4 Time Call and Edit Functions ······································································38
4.5 AUDIO Call and Edit Functions ···································································51
4.6 SCAN Call and Edit Functions ····································································54
4.7 FUNCTION Call and Edit Functions····························································55
4.8 READ and WRITE Functions······································································56
4.9 TELETEXT Functions ·················································································58
4.10 CLOSED CAPTION Functions··································································60
4.11 V-CHIP Functions······················································································62
4.12 REMOTE CONTROLLER ·········································································64
Chapter 5.
Customer Service···················································································65
Chapter 6.
Appendix·······································································································66
6.1 Timing Data (Default)··················································································66
6.2 Pattern Edit List Sample ·············································································75
6.3 PROGRAM, BMP Download and PC Edit ···················································83
6.4 RS-232C Communication interface·····························································111

MASTER CO., LTD Programmable Video Signal Generator
5 page
Chapter 1. Introduction
1.1 Foreword
▪ Thank you for purchasing the MSPG-6100L video signal generator.
▪ This manual provides details on how to operate the MSPG-6100L and the precautions to
be needed when doing so.
▪ Take the time to read through this manual before attempting to operate the MSPG-6100L.
▪ After reading this manual, keep it in a safe place for your future reference.
1.2 Product overview
▪ The generator enables you to test a board range of video displays including composite or
component television video signals as well as computer video display terminals(MSPG-
6100L, It can test the almost signal (HDMI, DVI, TV, Analog, Media Play etc.)).
▪ The generator enables you to quickly set signal generator formats appropriate for each
display by twisting a Jog.
▪ The generator's functions can be customized to support video display testing in a variety
of environments such as development, repair center, or production line.
1.3 Safety precautions
▪ Improper handling may lead to accidents.
▪ We recommended you to read through following warning, precaution and information's
without fail before attempting to operate the MSPG-6100L.
▪ These instructions to ensure that you will operate the MSPG-6100L properly.
▪ Don't install signal generator in dusty environment.
▪ Attention before connect between video signal generator and display instrument.
- Make sure to connect ground line to FG video signal generator.
- Ground connection plays an important role in protecting internal IC's and elements of
video signal generator.
- Take special care when connecting the generator to display unit.
- If these are not connect together, the generator may fail.
▪ Setup time for stable system
- System needs about 5 minutes setup time for measuring precise data. In installing time
don't do any operations.
▪ Fuse replacement : The fuse is a F3.15AL 250V "F" type.

MASTER CO., LTD Programmable Video Signal Generator
6 page
1.4 Notice for safe usage
▪ If the equipment is used in a manner not specified by the manufacture, the protection
provided by the equipment may be impaired.
1.4.1 AC Power
▪ Turn off power of signal generator when inserting a power plug in a socket.
▪ Don't use harmed power cable and loose socket.
▪ Separate power cable from a heating apparatus.
▪ Please, use power switch if you want to turn off signal generator.
▪ Use the three-wire power supply code.
▪ If you use unlicensed Cable, the video signal generator can cause electric shock.
▪ Whenever the AC power line voltage dips below the minimum specified, this message is
displayed and the generator's microprocessor is halted.
▪ If you see this message during normal operation, it probably indicates that a power sag or
short duration dropout has occurred. To clear this condition, cycle the power going to the
generator.
▪ If you still have a problem, you may also want to check to see that the line voltage
selector(next to the power inlet) is set correctly for the power being fed into the generator.
1.4.2 The Power Cord
▪ Always take hold of the molded part of the plug when disconnecting the power cord
▪ Use permissible AC Power and Connection Cable. If you use unlicensed Cable, the video
signal generator can cause electric shock.
▪ Do not use force to bend the power cord or bunch it up for use. Doing so may cause fire.
▪ Do not place heavy objects on top of the power cord. Doing so may damage the cord
causing a fire or electrical shock.

MASTER CO., LTD Programmable Video Signal Generator
7 page
1.4.3 The Generator
▪ Do not place the video signal generator at the ferromagnetic body area. The generator can
cause electric shock as irregular working.
▪ Do not subject the generator to impact or throw it. Doing so may cause the generator to
malfunction, explode or generate abnormally high levels of heat, possibly resulting in a fire.
▪ If there is a thunderstorm while the generator is being used outdoors, immediately turn off
its power, disconnect the power cable from the main unit, and move the generator to a
safe place.
▪ Do not place the signal generator long time in a car on hot day. It is able to cause
characteristic decrease, function inferiority and shape variation of outside parts. If you
place the condition continuously, it can case electric shock and fire as short circuit or
insulation.
▪ When you not using the video signal generator for a long time, disconnect AC Power plug
from AC line outlet for safe consideration.
▪ Do clean the FAN regularly.
▪ Wipe the cabinet with a dry cloth to eliminate dust.
▪ Be clean with the cleaner. Do not use benzene. If you use the benzene, the video signal
generator is changed shape variation of outside parts and the works is erased.
▪ This generator contains some high-voltage parts. If you touch them, you may receive an
electric shock and burn yourself so do not attempt to disassemble, repair or remodel the
generator.
▪ When occurring the malfunction or breakdown, don't disassemble the video signal
generator by yourself. Contact our company promptly.
▪ Set the video signal generator more 10cm from wall. It can obstruct the flowing of air. And
it causes fire because high temperature.
1.4.4 Installation
▪ Install the generator in a stable location. Do not stand it on either of its side panels. Doing
so may cause the generator's temperature to rise due to heat generation, possibly
resulting in malfunctioning.
▪ Don't install signal generator vertically.
▪ Install signal generator at flat place.
▪ Do not spill liquids inside the generator or drop inflammable objects into it. Operating the
generator under these conditions may cause a fire, electrical shock or malfunctioning.

MASTER CO., LTD Programmable Video Signal Generator
8 page
1.4.5 International Electrical Symbols
AC : Alternating Current
Earth Grounding
Conforms to European Union directives
High Definition Multimedia Interface
Digital Visual Interface
Directive on Restriction of the use of certain Hazardous Substances in EEE
In the unlikely event that trouble or malfunctioning should occur, first disconnect the power
cable, and then contact your dealer or Master technical sales department.
Tel : + 82-55-297-8880 / Fax : + 82-55-256-7388
E-mail : [e-mail] / [e-mail]

MASTER CO., LTD Programmable Video Signal Generator
9 page
1.5 Accessories packed with the MSPG-6100L
1) MSPG-6100L : Programmable Video Signal Generator
2) MSRC-005L : Remote Controller
3) User Manual
4) Cable

MASTER CO., LTD Programmable Video Signal Generator
10 page
Chapter 2. Concerning the MSPG-6100L
2.1 Introduction
§ HDMI Function Execution : HDMI 1.4a Version(Support 3D Video Formats)
§ CEC Function Support, Support Deep Color & xvYCC
§ Analog & Digital(Dual) Pixel rate up to 330MHz
§ HDCP Execution, Teletext, V-Chip, Closed Caption
§ Displayport 1.1a Version
<MSPG-6100L Front> <MSPG-6100L Real>
< MSPG-6100L Output Port >
HDMI(Ver 1.4) & Optical 5 PORT
DVI 2 PORT (Single, Dual)
DISPLAYPORT 1 PORT
ANALOG 1 PORT
Component 1 PORT
CVBS & S-Video 1 PORT
Audio(R,L) & Optical(Input, Output) & S/PDIF

MASTER CO., LTD Programmable Video Signal Generator
11 page
2.2 Features
1) Possible to adjust and inspect of high-resolution monitors
▪ Analog Monitor : 8~330MHz Pixel Frequency
▪ Digital single Monitor : 25~165MHz Pixel Frequency
▪ Digital dual Monitor : 25~330MHz Pixel Frequency
▪ Max Image : 2048X2048 bit map size Max 60 page possible to save
2) Analog/Digital signal simultaneous output
▪ BNC, 15P D-SUB ,DVI and HDMI simultaneous output
3) Certain abundant preset testing patterns and particular patterns
▪ MSPG-6100L has Initial patterns(Include Character, Color Bar, Cross Hatch, Grayscale,
Combination so on, kinds of 500 pattern), and particular patterns(Include Image, Image
Moving Pattern, so on) all of these patterns can be edited by user.
4) Convenience operation of the unit
▪ Possible to call patterns and timings by remote Controller & RS-232C.
5) Possible to make scan and function group with model and pattern
▪ Editing any model and pattern, using the function Group(1~99), and Scan Group(1~99).
6) Digital output
▪ It can output the Digital Single / Dual output using Sil170(Panel Link)chip, which
includes HDCP(High-Bandwidth Digital Content Protection) function.
▪ It can output the HDMI 1.4Ver signal with HDCP using Sil9334 chip.
7) D-TV signal output
▪ 1080p, 1080i, 720p, 483p, 480i, 576p, 576i, etc. ATSC and DVB format.
8) NTSC, PAL, SECAM output
▪ NTSC-M, NTSC-J, NTSC-4.43
▪ PAL-B/D/G/H/I, PAL-M, PAL-60
▪ SECAM

MASTER CO., LTD Programmable Video Signal Generator
12 page
9) SUPPORTS PC download
▪ Possible to download the main firmware program by PC.
10) Internal Audio output
▪ Mono & Fix & Swap & Sweep & Up & Down Mode
11) S/PDIF
▪ Input the Digital Audio signal, and then output it through HDMI port.
12) Optical Audio signal Input/output
▪ Input the Optical Audio signal, and then output it through HDMI port.
13) Displayport Output
▪ Displayport is a high-speed interface which is transmit Digital Video & Audio signal
compliance with VESA standard.

MASTER CO., LTD Programmable Video Signal Generator
13 page
2.3 Specifications
*** MSPG-6100L Specifications ***
Display Size 2560 X 1600
Pixel Clock Max. 10.8Gbps (2.7GHz-1,2,4 Lanes / 1.6GHz-1,2,4 Lanes)
Link Rate 25~300MHz
Input Format RGB444, YCbCr444, YCbCr422 (6,8,10,12 Bit)
Compliant Displayport 1.1a Version
Displayport
Audio SPDIF, 192KHz, 2 Channels
Horizontal 10~300KHz / 1 Dot Resolution
H/V Frequency Vertical 10~300Hz / 1 Line Resolution
Display Size 4096 X 4096
Pixel Clock 8~330MHz
Video Level R, G, B (Load 75 ohms, 0~1.0V Programmable)
Output Connector 15P D-Sub, DVI-I
EDID Read
Analog Output
Separate Sync HS, VS (3.0V~5.5Vp-p Programmable / Inherited Sync Level is 5.0Vp-p)
Pixel Clock * Single Link: 25~165MHz / * Dual Link: 25~330MHz
* Single TMDS 24 Bit Input Mode
Transfer Type
* Dual TMDS 12 Bit Input Mode
EDID Read
HDCP Support Single & Dual
Compliant DVI 1.0 Support
Video Signal Type RGB
Output Connector DVI-I (DVI 2 Ports, Single/Dual)
DVI (TMDS)
Output
Data Bit 8~16 Bit
* NTSC M,J (3.58MHz)
* NTSC443 (4.4MHz)
* PAL B, D, G, H, I (4.434MHz)
Output Mode
* SECAM (For=4.406MHz / For=4.25MHz)
Subcarrier Stability 25ppm (±25Hz / 1MHz)
Composite (BNC), S-Video
* Signal: CVBS (Connector: BNC)
Video Output
* Signal: Y/C (Connector: 4Pin-Mini Din)
Closed Caption (NTSC) C1, C2, C3, C4 / T1, T2, T3,T4
CVBS Output
V-Chip * MPAA Rating: G, PG, PG-13, R, NC-17, X

MASTER CO., LTD Programmable Video Signal Generator
14 page
* XFCC Rating: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, TV-MA
Teletext (PAL) Teletext System B Level 1, 1.5
Signal Y, Pb, Pr
Connector BNC
Time 480i/p, 576i/p, 720p, 1080i/p for ATSC and DVB Format
D-TV Output
Note Support D Terminal for Japanese D-TV
(Adjustable to 16:9, 4:3 aspect ratio)
Compliant 1.4a Version (CEC Support)
Pixel Rate Range 25~165MHz (TMDS Clock : 25~225MHz)
Standard Spec EIA/CEA-861D
Video Signal Type RGB, YCbCr
Pixel Encoding RGB444, YCbCr444, YCbCr422
Data bit of RGB & YCbCr 8, 10, 12
Color Space RGB, BT-601, BT-709, xvYCC-601, xvYCC-709
HDCP Support HDCP 1.1 Version
EDID Read
Output Connector Type A, HDMI 5 Port
Note Support Deep Color & xvYCC
HDMI (TMDS)
Video Output
HDMI Ver 1.4 3D Video Formats(Stereoscopic)
Sample Rate 32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192KHz
Number of Channel 8 Channels
Bit per Sample 24
Waveform Sine Wave
Frequency Range 0Hz to 24KHz / 5Hz step
Level Range 0mV to 2.0V / 100mV step
External Audio Input S/PDIF, Optical
HDMI Audio
Output
Special Control Mode Fix, Sweep, Swap, Optical, Mute
Frequency Range 20Hz to 20KHz / 5Hz step
Level Range 0mV to 2.0V / 100mV step
Waveform Sine Wave
Number of Channel 2 Channels
Connector RCA
Audio (Analog)
Output
Special Control Mode Fix, Sweep, Swap, Mute
Scan Storage 99 Group (1 Group; 24 Step)
Scan & Function
Group Function Storage 99 Group (1 Group; 32 Step)
Data Storage
Device
Timing 999 Timing (User: 1~500, Default: 501~999)

MASTER CO., LTD Programmable Video Signal Generator
15 page
Pattern 999 Pattern (User: 1~500, Default: 501~999)
Compact Memory Card 2GB
Power Consumption AC 100~240VAC, 50/60Hz Auto Switch
* Temperature : 0~40℃
Operating Conditions
* 80% Humidity, Non-condensing
General
Specification
Dimension (WXDXH) 440 X 355 X 145mm, Weight: 6Kg
Max Image 2048 X 2048 Bit Map Image Size
Moving 1 Dot, 1 Line Control
* Front Panel (6.4 inch / Graphic LCD) Key Pad
* Possible to Timing Parameter Edit
Others
User Interface
* USB, RS-232C, PC EDIT Tool
* Note: 1ppm = 1Mhz per 1Hz unit
* All specifications are subject to change without any notice.

MASTER CO., LTD Programmable Video Signal Generator
16 page
2.4 Panel parts and their functions
2.4.1 Front Panel of MSPG-6100L
(1) Power Switch: AC Power ON/OFF Key.
(2) LCD: Display all of data information is at the screen.
(3) Easy JOG/Enter: This turned clockwise or counter clockwise to select the setting items or
parameters or levels etc.
(4) CF Card: Read/Write of system programs, Time Data, Pattern Data.
(5) Download Port: Firmware download port.
(6) USB: BMP File Write (Write to generator only).

MASTER CO., LTD Programmable Video Signal Generator
17 page
2.4.2 Description of front key
Output the HS signal, upon LED On condition. If the Button is ON output.
Transfer to display the screen, otherwise No Transfer.
If Only HS Button On, No Display in the screen. HS, VS both Button on Screen
Display Output.
Output the VS signal, upon LED On condition. If the Button is ON Output.
Transfer to display the screen, otherwise No Transfer.
If Only VS Button On, No Display in the screen. HS, VS both Button on Screen
Display Output.
Output the Red signal, upon LED On condition.
If the Button is ON Output Transfer to display the screen, otherwise No
Transfer (In case of full white pattern).
(1) Push R, G, B Button On that time Screen Display White,
(2) Push R, G Button On that time Screen Display Yellow,
(3) Push R, B Button On that time Screen Display Magenta,
(4) Push G, B Button On that time Screen Display Cyan. Output the Green
signal, upon LED On condition.
Output the Red signal, upon LED On condition.
If the Button is ON Output Transfer to display the screen, otherwise No
Transfer (In case of full white pattern).
(1) Push R, G, B Button On that time Screen Display White,
(2) Push R, G Button On that time Screen Display Yellow,
(3) Push R, B Button On that time Screen Display Magenta,
(4) Push G, B Button On that time Screen Display Cyan. Output the Green
signal, upon LED On condition.

MASTER CO., LTD Programmable Video Signal Generator
18 page
Output the Red signal, upon LED On condition.
If the Button is ON Output Transfer to display the screen, otherwise No
Transfer(In case of full white pattern).
Use this key for Patterns of position check.(Inserting order is as like □, ×,
OSD pattern)
(1) Push 1st Time : Out Side Line Display(Check Top, Bottom, Left and Right(□)).
(2) Push 2nd Time : Cross Line Display(Center Position Checking(×)).
(3) Push 3rd Time : Character Checking.
(4) Push 4th Time : OFF
Copy the data from CF card to MSPG-6100L. (Reference page. 56)
Copy the data from MSPG-6100L to CF card. (Reference page. 56)
Reverse the pattern: On/off key using reverse button.
When LED on, running the HDCP function.
When HDCP Button is on, you are not able to edit.
If you need to edit, you should turn off the HDCP Button.
This key is for checking the result, after inspecting HDCP certificate.
You can see the info about AKSv, BKSv, Ti, Ri and HDCP pass on the display.
(1) 1, 2, 3 4 for HDMI & HDCP information section
(2) 5, 6 for DVI information section
(3) 7 for information off.
This key can call the set Scan data(Time, Pattern) to display auto-progression.
Pattern and Timing will change automatically.
Pattern and Timing will change automatically.
This key can call Function Group (F1~F32) that is saved as edit the
Function(Time, Pattern). (Reference page. 55)
Color Burst On/Off set up key(CVBS, S-Video Only).
If the Burst is in On Condition the Color displayed in the screen.
If the Burst is in Off Condition Color No Display Black & White Display in the screen.

MASTER CO., LTD Programmable Video Signal Generator
19 page
This key for HDMI 1.4 Part of PCB Board.
User can use HDMI1.4 function as push this key after then activity.
This is only HDMI Functionality (Output only).
If you On this Button ready for HDMI, CEC connection, else Disconnect the
HDMI, CEC.(Media player adapted auto CEC check.
The key for setting up the Media display ratio.
(1) Set the Buzzer On/Off
(2) Setting Sync output level : from 3000 to 5500mV per 100mV
(3) RS-232C Baud Rate : No.1 : 4800 / No.2 : 9600 / No.3 : 19200 / No.4 :
38400 / No.5 : 57600 / No.6 : 115200 / No.7 : 230400 / No.8 : 460800
(4) Data Bit : 8bit, 7bit
(5) Stop Bit : 1bit, 2bit
(6) Parity : Non, Even, Odd
(7) Data set up : This is option. When you use RS-232C
Communication to use either select Y Level(0~100%) of
pattern or 0~255.
(8) Data Size set up : This is option to use either select pattern Size(0~100%)
of window inner BOX or H/V.
(9) EDID Block Read set up : Set up the part of EDID Block for read(0~4).
(10) Old Edit Passwords : Input of established store password.
(11) New Edit Password : Input of new password(Before input new password,
you should store old password).
(12) HDCP Display set up : HDCP OSD’s set up to Pass or OK.
(Normal -> HDCP Pass OSD.SAMSUNG -> HDCP OK OSD)
(13) HDCP Retry On set up :
Off -> HDCP fail case : HDCP authorization runs until 5times and then not
try to authorization option.
On -> HDCP fail case : HDCP authorization runs until success.
(14) HDMI Lip Sync set up : HDMI Lip Sync On/Off set up.
(15) AV MUTE set up :
When HDCP Fail case’s that Audio and Video Display /Clear.
(16) Image set up : Set the output speed of output option images.
Speeds up the rate set by FPGA.

MASTER CO., LTD Programmable Video Signal Generator
20 page
This key is for call the pattern from CVBS, S-VIDEO MODE.
This key is for call the Timing from CVBS, S-VIDEO MODE
This key is for call the pattern which is output from Analog, DVI, HDMI, DTV,
D5 calling. (Reference page. 37)
This key is to call all Times [1]. User Time, 2]. Default Time]) from user Time to
Default Time. (Reference page. 38)
This key is for call only HDMI Time Mode.
If you call other calling mode except HDMI Time Mode, It will cry warning sound.
This key is for call only DTV Time Mode.
If you call other calling mode except DTV Time Mode, It will cry warning sound.
This key is for calling Audio Pattern.
(1) Edit the pattern & time data when V/G function.
(2) Move to edit menu when Media Function.
[LEVEL ADJUSTMENT]
This key is for changing level value of brightness and contrast with only LED
on condition.
Especially, In case of contrast, the SHIFT key should be "On" condition to
change level value.
In case of V/G Mode, it can used by contrast & Brightness.
In case of Media mode, it can used by EXIT key.