MasterCraft 068-7306-2 User manual

continuation tabs
IMPORTANT:
Please read this manual carefully before assembling
and using this cabinet and save it for reference.
INSTRUCTION
MANUAL
EXTRA-WIDE WALL CABINET
Model no. 068-7306-2

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
1
TABLE OF CONTENTS
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 068-7306-2 | contact us 1-800-689-9928
If any parts are missing or damaged, or if you have any questions,
please call our toll-free helpline at 1-800-689-9928.
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions.
Read all instructions and follow them with use of this product.
NOTE:
TABLE OF CONTENTS
2
3
4
6
9
10
Safety
Exploded View
Parts List
Assembly Instructions
Mounting Instructions
Warranty

2
SAFETY
• To reduce the risk of serious injury, read the following safety
instructions before assembling and using the cabinet.
• This cabinet is intended for domestic, indoor use only.
• The cabinet should be positioned on a level surface.
• Any assembly or maintenance of the cabinet must be carried
out by adults only.
• Arrange for necessary manpower when assembling and moving
the cabinet.
• Check all the nuts and bolts periodically for tightness.
When required, tighten them again.
• Use a slightly damp, soft cloth to clean the cabinet.
• Do not stand on the cabinet and do not use it as a scaffold.
• Do not exceed the weight limit specified for this cabinet.
Maximum Load: 280 lb (127 kg).
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions.
Read all instructions and follow them with use of this product.

3
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 068-7306-2 | contact us 1-800-689-9928
EXPLODED VIEW
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
Overview

4
PARTS LIST
PARTS LIST
No.
1
2
3
4
5
6
7
8
9
10
Description
Bottom panel
Front panel
Left panel
Right panel
Back panel
Hanging bracket
Door panel
Door hinge
Magnet
Screw (M4 x 8L)
Qty.
1
1
1
1
1
2
1
2
2
38
Illustration

5
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 068-7306-2 | contact us 1-800-689-9928
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
PARTS LIST
PARTS LIST
No.
11
12
13
14
15
16
17
18
19
Description
Screw (M4 x 8L)
Screw (M6 x 50L)
Screwdriver
Key
Wall Anchor
Washer
Door hinge fixture A
Door hinge fixture B
Screw (M5 x 10L)
Qty.
6
8
1
2
8
1
2
2
4
Illustration

6
ASSEMBLY INSTRUCTIONS
ASSEMBLY PREPARATION
• Assemble the storage cabinet on a clean, level surface.
• Remove all items from the packaging box and ensure that all parts listed on
pages 4 and 5 are included.
• When installing parts that have more than one screw, tighten all screws by hand
before tightening them with the screwdriver provided.
ASSEMBLY INSTRUCTIONS
1. Install Left Panel (3) to Top
Panel (2)
Attach the Left Panel (3) to the Top
Panel (2). Line up screw holes, and
secure with three Screws (10) using
Screwdriver (13).
Note: Make sure the panels are flush
before fastening (Fig. A).
2. Install Right Panel (4) to Top
Panel (2)
Attach the Right Panel (4) to the Top
Panel (2). Line up screw holes, and
secure with three Screws (10) using
Screwdriver (13).
Note: Make sure the panels are flush
before fastening (Fig. B).
3. Install Bottom Panel (1)
Attach Bottom Panel (1) to the Left
Panel (3) and Right Panel (4) as
shown in Figure. Line up screw holes
and and secure with six Screws (10)
using Screwdriver (13) (Fig. C)
Fig. A
Fig. B
Fig. C

7
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 068-7306-2 | contact us 1-800-689-9928
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
ASSEMBLY INSTRUCTIONS
4. Install Back Panel (5)
First, line up the screw holes on the
Back Panel (5) with Left Panel (3),
Right Panel (4) and Bottom Panel (1).
Then, attach the Back Panel (5) with
14 Screws (10) using Screwdriver (13)
(Fig. D).
5. Install Magnet (9)
Attach the Magnets (9) to the Bottom
Panel (1) and secure with four Screws
(10) using Screwdriver (13) (Fig. E).
Note: The black plate of the Magnets
(9) should be facing the front.
6. Install Door Hinge Fixture B (18)
Attach the Door Hinge Fixtures B (18)
to the Door Panel (7). Line up screw
holes, and secure with four Screws
(10) using Screwdriver (13) (Fig. F).
Fig. D
Fig. D
Fig. F

8
ASSEMBLY INSTRUCTIONS
7. Install Door Hinge Fixture A (17)
First, attach Door Hinge Fixture A (17)
to the Left Panel (3) with two Screws
(10), then attach the Door Hinge (8)
onto the Fixture A (17) with one Screw
(19). Line up screw holes and use
Screwdriver (13) during assembly.
Attach the other Door Hinge Fixture A
(17) and Door Hinge (8) to the Right
Panel (4) in the same way (Fig. G).
8. Install Door Panel (7)
Attach the Door Panel (7) to the Top
Panel (2). Line up screw holes, and
secure with six Screws (11) using
Screwdriver (13) (Fig. H).
9. Attach Door Hinge (8) to Door
Panel (7)
Attach the Door Hinge (8) to Door
Hinge Fixture B (18) on the Door Panel
(7) with one Screw (19). Line up screw
holes and use Screwdriver (13) to
tighten. Make sure to attach the hinge
in correct direction. Attach the other
Door Hinge (8) to the Door Panel (7) in
the same way (Fig. I).
Adjust by Wrench (16) clockwise to
tighten and reverse to loosen.
10. Finish Assembly
Now your cabinet is ready to be
mounted on the wall (Fig. J).
Fig. G
Fig. H
Fig. I
Fig. J

9
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 068-7306-2 | contact us 1-800-689-9928
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
1. Choose a location for the wall
cabinet. The recommended height
from the floor to the bottom of the
cabinet is 63" (160 cm) (Fig. K).
2. Use the provided shop drawing as
guidance to drill holes (Φ8 mm) on
the wall (Fig. L).
3. Insert eight Wall Anchors (15) into
the pre-drilled holes on the wall. Then
use eight Screws (12) to fix the two
Hanging Brackets (6) on the wall.
Make sure all screws are fastened
tightly (Fig. M).
4. Finally, hang the cabinet on the
hanging brackets (6). Now, your
cabinet is ready for use. Use the keys
(14) to lock the cabinet doors, if
desired (Fig. N).
Fig. K
Fig. L
Fig. M
Fig. N
63" (160 cm)

This Mastercraft® product carries a one (1) year warranty from the date of the original
retail purchase, against defects in material and workmanship. Subject to the condi-
tions and limitations described below, this product, if returned to us with proof of
purchase within the stated warranty period and if covered under this warranty, will be
repaired or replaced (with the same model, or one of equal value or specification), at
our discretion. We will bear the cost of any repair or replacement and any costs of
labour relating thereto.
This warranty is subject to the following conditions and limitations:
a. a bill of sale verifying the purchase and purchase date must be provided;
b. this warranty will not apply to any product or part thereof which is worn or broken
or which has become inoperative due to abuse, misuse, accidental damage, neglect or
lack of proper installation, operation or maintenance (as outlined in the applicable
owner's manual or operating instructions) or which is being used for industrial, profes-
sional, commercial or rental purposes;
c. this warranty will not apply to normal wear and tear or to expendable parts or acces-
sories that may be supplied with the product which are expected to become inopera-
tive or unusable after a reasonable period of use;
d. this warranty will not apply to routine maintenance and consumable items such as,
but not limited to, fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids,
tune-ups or adjustments;
e. this warranty will not apply where damage is caused by repairs made or attempted
by others (i.e., persons not authorized by the manufacturer);
f. this warranty will not apply to any product that was sold to the original purchaser as
a reconditioned or refurbished product (unless otherwise specified in writing);
g. this warranty will not apply to any product or part thereof if any part from another
manufacturer is installed therein or any repairs or alterations have been made or
attempted by unauthorized persons;
h. this warranty will not apply to normal deterioration of the exterior finish, such as, but
not limited to, scratches, dents, paint chips, or to any corrosion or discolouring by heat,
abrasive and chemical cleaners; and
i. this warranty will not apply to component parts sold by and identified as the product
of another company, which shall be covered under the product manufacturer's
warranty, if any.
10
WARRANTY

Additional Limitations
This warranty applies only to the original purchaser and may not be
transferred. Neither the retailer not the manufacturer shall be liable for
any other expense, loss or damage, including, without limitation, any
indirect, incidental, consequential or exemplary damages arising in
connection with the sale, use or inability to use this product.
Notice to Consumer
This warranty gives you specific legal rights, and you may have other
rights, which may vary from province to province. The provisions
contained in this warranty are not intended to limit, modify, take away
from, disclaim or exclude any statutory warranties set forth in any applica-
ble provincial or federal legislation.
Made in China
Imported by
Mastercraft Canada Toronto, Canada M4S 2B8
headline bars
continuation tabs
notes
warnings

ARMOIRE MURALE EXTRA-LARGE
Modèle nº 068-7306-2
continuation tabs
IMPORTANT :
Veuillez lire attentivement ce guide avant d’assembler
et d’utiliser cette armoire haute et le conserver à titre de référence.
GUIDE
D’UTILISATION

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
1
TABLE DES MATIÈRES
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
Modèle n° 068-7306-2 | Contactez-nous au 1 800 689-9928
TABLE DES MATIÈRES
2
3
4
6
9
10
Sécurité
Vue éclatée
Liste des pièces
Instructions d’assemblage
Instructions de montage
Garantie
REMARQUE :
Si des pièces sont manquantes ou endommagées, ou si vous avez des questions,
veuillez contacter notre service de soutien téléphonique sans frais au 1 800 689-9928.
CONSERVEZ CES INSTRUCTIONS
Le présent guide d’utilisation contient un mode d’emploi et des
consignes de sécurité importants. Lisez et respectez toutes les
instructions lorsque vous utilisez cet article.

2
SÉCURITÉ
• Pour réduire les risques de blessures graves, lisez les consignes de
sécurité suivantes avant d’assembler et d’utiliser l’armoire.
• Cette armoire est conçue pour un usage domestique, à l’intérieur
seulement.
• L’armoire doit être placée sur une surface plane.
• Tout assemblage ou entretien de l’armoire doit être effectué par des
adultes seulement.
• Demandez à d’autres personnes de vous aider à assembler et
déplacer l'armoire.
• Vérifiez périodiquement le serrage de tous les écrous et boulons.
Au besoin, resserrez-les.
• Utilisez un chiffon doux légèrement humide pour nettoyer l’armoire.
• Ne vous tenez pas debout sur l’armoire et ne l’utilisez pas comme
échafaudage.
• Ne dépassez pas la limite de poids spécifiée pour cette armoire.
Charge maximale : 280 lb (127 kg).
CONSERVEZ CES INSTRUCTIONS
Le présent guide d’utilisation contient un mode d’emploi et des
consignes de sécurité importants. Lisez et respectez toutes les
instructions lorsque vous utilisez cet article.

3
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
Modèle n° 068-7306-2 | Contactez-nous au 1 800 689-9928
VUE ÉCLATÉE
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
Vue

4
LISTE DES PIÈCES
LISTE DES PIÈCES
Nº
1
2
3
4
5
6
7
8
9
10
Description
Panneau inférieur
Panneau supérieur
Panneau latéral gauche
Panneau latéral droit
Panneau arriére
Support d'accrochage
Panneau de porte
Charniére de porte
Support d'aimant
Vis (M4 x 8L)
Qté
1
1
1
1
1
2
1
2
2
38
Illustration

5
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
Modèle n° 068-7306-2 | Contactez-nous au 1 800 689-9928
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
LISTE DES PIÈCES
LISTE DES PIÈCES
Nº
11
12
13
14
15
16
17
18
19
Description
Vis (M4 x 8L)
Vis (M6 x 50L)
Tournevis
Clé
Vis
Clé hexagonale
Dispositif de fixation de
la charnière de porte A
Dispositif de fixation de la
charnière de porte B
Vis (M5 x 10L)
Qté
6
8
1
2
8
1
2
2
4
Illustration

6
INSTRUCTIONS D’ASSEMBLAGE
PRÉPARATION DE L’ASSEMBLAGE
• Commencez l’assemblage de cette armoire sur une surface propre et plane.
• Retirez tous les articles de la boîte et assurez-vous que toutes les pièces
énumérées aux pages 4 et 5 sont présentes.
• Lors de l’installation de pièces ayant plus d’une vis, serrez toutes les vis à la
main avant de les serrer à l’aide du tournevis (24) fourni.
INSTRUCTIONS D’ASSEMBLAGE
1. Attachez le panneau latéral gauche
(3) au panneau supérieur (2)
Attachez le panneau latéral gauche (3)
au panneau supérieur (2). Alignez les
trous de vis, et fixez avec trois vis (10)
en utilisant le tournevis (13).
Remarque : Assurez-vous que les
panneaux sont alignés avant de les
fixer (Fig. A).
2. Installez le panneau droit (4)
sur le panneau supérieur (2)
Attachez le panneau droit (4) au
panneau supérieur (2). Alignez les
trous de vis et fixez avec trois vis (10)
à l'aide d'un tournevis (13).
Remarque : Assurez-vous que
panneaux sont alignés avant de les
fixer (Fig B).
3. Installez le panneau inférieur (1)
Attachez le panneau inférieur (1) aux
panneaux latéraux gauche (3) et droit
(4), comme illustré dans la figure.
Alignez les trous de vis, et fixez avec
six vis (10) en utilisant le tournevis (13)
(Fig. C).
Avant
Arrière
Fig. A
Fig. B
Fig. C

7
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
Modèle n° 068-7306-2 | Contactez-nous au 1 800 689-9928
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3582-8 | contact us 1-800-689-9928
INSTRUCTIONS D’ASSEMBLAGE
4. Installez le panneau arrière (5)
D'abord, alignez les trous de vis du
panneau arrière (5) sur les panneaux
latéraux gauche (3) et droit (4), et sur
le panneau inférieur (1). Ensuite, fixez
le panneau arrière (5) avec 14 vis (10)
à l'aide d'un tournevis (13) (Fig. D).
5. Installez l'aimant (9)
Attachez les aimants (9) au panneau
inférieur (1) et fixez avec quatre vis
(10), à l'aide du tournevis (13) (Fig. E).
Remarque : La plaque noire des
aimants doit être orientée vers l'avant.
6. Installer le support de charnière
de porte B (18)
Attachez le dispositif de fixation de la
charnière de porte B (18) au panneau
de porte (7). Alignez les trous de vis, et
fixez avec quatre vis (10), à l'aide du
tournevis (13) (Fig. F).
Fig. D
Fig. E
Fig. F