Masterpiece Zippo User manual

- ZIPPO -

ZIPPO View 1
Assembly the same
for both guns
The rings (2) to be made from styrene rod (supplied).
Vents (3 places)

ZIPPO View 2
Assembly the same
for both guns

ZIPPO View 3
7/8" (.875") in length.
(2 places)
11/4" (1.25") in lenght (X2)
11/4" (1.25") in lenght (x2)
21/4" (2.25") in length (X2)
21/4" (2.25") in length (X2)
21/4" (2.25") in length (X2)
21/4" (2.25") in length (X2)
Back view
Front gun
Rear gun

ZIPPO View 4
Assembly illustration for front gun
Assemble gun cage around the gun.
Don't assemble gun cage first
Assembly the same for both guns

Continue to place the vertical bars.
ZIPPO View 5

ZIPPO View 6
Cut and fashion styrine rod to create "Grille Bars"

ZIPPO View 7
(3 lights) - Assemble and attach
to back side of grille bars.
(2 handles) - Attach to front side of grille bars.
Back side
Build this mast (4" piece and 1"piece)
from styrine rod and use thread
to rig it.
Cut 2 styrine pieces at 5" long
and attach them to the posts
on the middle deck.
Thread
Attach 8 vertical "Bumpers" on
the port side only.