MAX Plus HTS 7300 User manual

E109000206A
USER’S MANUAL
Digital Satellite Receiver
HTS 7300
HTS 7300+

1
1. Introduction 2
1.1 Overview
1.2 Main Features
2. Safety/Precautions 3
2.1 Safety
2.2 Precautions
3. Check Point before Use 5
3.1 Accessories
4. Controls/Functions 6
4.1 Front Panel
4.2 Rear Panel
4.3 Remote controller
5. How to Connect 10
6. Operation 11
6.1 Getting Started
6.2 System Setting
6.3 Channels
6.4 Guide
6.5 Games
6.6 System Information
7. Trouble Shooting 27
8. Specifications 28
Contents
DiSEqC is a trademark of EUTELSAT

2 3
This satellite receiver is designed for using digital free-to-air channel reception. Enjoy the
rich choice of more than 4,000 different channels, broadcasting a large range of culture,
sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with
the highest qualified electronic parts.
Be sure to read the user's manual before
starting the operation of the unit. Do not touch the power cord with wet hands as it may cause electric shock.
Never open the cover. It is very
dangerous to touch the inside of the
unit due to possible electric shock.
Place the unit in a well ventilated and
no-heat environment.
When you do not use this unit for a
long time, make sure that power cord
is pulled out from the outlet. Also do
not use a damaged power cord as it
may cause fire or electric shock.
A professional installation is required.
If reception is interrupted, contact your
local service centre.
Introduction Safety/Precaution
1.1 Overview 2.1 Safety
MPEG-II Digital & fully DVB compliant.
On-screen display with 256 color resolution.
DiSEqC Control Version 1.0, 1.1, 1.2 and USALS compatible.
Renameable 8 Favorite channel groups.
Powerful Channel control by Favorites, Lock, Skip, Move and Delete.
Channel Sorting by Alphabet, Transponder and CAS.
10 languages(OSD & Menu): English, Italian, Turkish, Arabic, Parsi, German, French, Russian,
Spanish, Protuguese.
Extended EPG and Program Reservation through EPG.
Teletext support.(OSD and VBI Insertion)
Last channel memory function.
Total 4,000 Channels programmable.
Multi-Satellite Search
Games Included.(Tetris, Sokoban, Snake)
Software & Channel Database Upgrade via RS-232C from PC(PC-to-Set)or Set(Set-to-Set).
Parental lock/ Installation Lock / Receiver Lock / Channel Lock / Lock Channel confirm.
Zoom Function in Pause.
1.2 Main Features

4 5
User's manual : 1
User's manual
Remote control : 1
Batteries (AAA type) : 2
If any accessories listed above
are missing, contact the sales
representative where you
purchased this unit.
INFO PAUSE
GUIDE
GROUP
TV/RADIO
TV/SAT
MENU
EXIT
CH
VOLVOL
CH
TEXTRECALL AUDIO
RCA Cable : 1
When installing the unit
2.2 Precautions
Accessories of this are as below
Check Points before Use
3.1 Accessories
Your dish should be properly installed and azimuth and elevation must be precisely set up.
This unit is working with DiSEqC 1.2 on a compatible antenna positioner.
Ask your dealer for information.
3.2 The Satellite dish
Install the unit horizontally. An uneven
installation may cause the unit to be
damaged.
Do not put heavy items such as a TV
on the unit. That may cause the unit to
be damaged.
Do not leave the unit where the water
drops or splashs. Do not put water holding items shch as vase on the unit.
Do not install the unit:
Where it is subject to vibrations
Where it is exposed to direct sunlight
Where there is humidity
Where the temperature is too high or too low.
Where there is no ventilation
Moving the unit to a hot area from a
cold one will cause condensation.
Do not operate the unit for one or two
hours or until it has dried completely.

6 7
Standby/Power on lndication Light : Flashing red on “Stand By” mode and no
light on “Power On” mode.
Indication Light : While pressing RCU key, this light will be flashing at the same
time.
Power : To switch the receiver in “standby” mode or in power on mode.
- CH. /: To change channel or cursor position on the application screen.
54
3
2
1
3
51 2 4
Controls/Functions
4.1 Front Panel
4.2 Rear Panel
10 1 3 5 7
9 11 2 4 6 8
No. Name Connector Function
1 RF OUT UHF 21-69 IEC 169-2 male Output to TV
2 TV ANT IN IEC 169-2 female Input from terrestrial antenna
3 AUDIO L RCA cinch Left audio output
4 AUDIO R RCA cinch Right audio output
5 VIDEO RCA cinch Composite video output
6 S/PDIF RCA cinch Digital audio output
7 TV SCART SCART CVBS, RGB Video Output
Audio Output
8 VCR/AUX SCART SCART CVBS Video Output
CVBS, RGB Video Input
Audio Output
9 RS-232C DB-9 Low speed serial port
10 LNB INPUT IEC 169-24 female IF input from LNB to digital tuner
11 LOOP OUT IEC 169-24 female IF loop-through output from digital tuner

8 9
POWER :Turns the receiver On/Off.
MUTE : Turns the sound On/Off.
Numeric Keys(0-9): Controls the
numerical operation and channel
numbers directly.
INFO. :Shows the information of the
current program. If you press once more,
detail information box will be shown.
PAUSE :This key is used to pause the
video. Press once more to resume the
video.
GUIDE(EPG:Electronic Program Guide):
Show the TV/Radio program guide.
GROUP :To change the channel
groups(Satellites or favorite groups).
MENU : Enter or exit the main menu.
EXIT :Exit from the present menu and
moves to the previous menu.
-Double arrow UP/DOWN(/):
Move to the next or previous page if
more than one page are available.
1110
9
8
7
6
5
4
3
2
1
INFO PAUSE
GUIDE
GROUP
TV/RADIO
TV/SAT
MENU
EXIT
CH
VOLVOL
CH
TEXTRECALL AUDIO
12
7
9
11
5
3
6
4
8
10
INFO PAUSE
GUIDE
GROUP
TV/RADIO
TV/SAT
MENU
EXIT
CH
VOLVOL
CH
TEXTRECALL AUDIO
15
18
22
13
21
12
16
14
17
19
20
4.3 Remote Controller 4.3 Remote Controller
-Up & Down(/):Changes
channels in non-menu mode and moves
the cursor up/down in menu mode.
-Left & Right(/):Changes the
volume level in non-menu mode and
change setting in menu mode.
(OK): Shows the Channel List in non-
menu mode and select an item or
confirm in menu mode.
TV/RADIO :Switches between TV and
Radio.
TV/SAT :Toggles the TV output source
between the satellite input and UHF/VHF
antenna input.
RECALL(RED):Moves to previous
channel. Used for special function in
menu.
AUDIO(GREEN): Shows the multi-
language audio track, stereo-mono
mode, subtitle information. Used for
special function in menu.
TEXT(YELLOW): Shows the teletext
contents if teletext is transmitted. Used for
special function in menu.
BLUE : Used for special function in menu.
22
21
20
19
18
17
16
VOL
VOL
1514
CH
CH
1312

10 11
How to Connect Operation
5.1 When Connecting IRD to TV with RF, AV connectors 6.1 Getting Started
Connect the TV antenna to TV ANT IN
Connect the RF-IN of TV to RF-OUT
Connect the Video and Audio of TV to the Video and Audio. Connect Red and
White connector to Audio R and Audio L, and Yellow into Video port
respectively
Connect your satellite dish
4
3
2
1
Turn on your TV and receiver.
The pop-up menu for language selection will appear <Figure 6-1>.
Select one language and press the to proceed.
Note : Languages displayed in 'Language' raw are supported by your receiver.
After your receiver is powered on, proceed with installation as follows:
1) Menu Language Setting
<Figure 6-1>
Press the MENU button to display the main menu.
Use the / and / to move in menu.
Press the on the "Dish Setting". The following window will appear. <Figure 6-2>
If you have motorized dish, press the on the "Motorized Setting". <Figure 6-3>
Note : Enter 4-Digit password if need arise.
The default password is ‘0000’.
VOL
VOL
CH
CH
2) Antenna Setup

1312
6.1 Getting Started
Select item you want to edit and change each parameter.<Dish Setting>
- LNB Power : Select LNB power (ON / OFF / 13V / 18V)
- LNB Type : Select your LNB Type. (Single / Universal / OCS)
- LNB Freq : Select LNB oscillator frequency.
- 22KHz : Set the path of 0/22KHz switch box.
- DiSEqC switch : Select DiSEqC box type (OFF / 1,0 / 1.1)
- Committed / Uncommitted : Select DiSEqC port.
Select item you want to edit and change each parameter.<Motorized Setting>
- Frequency : If default TP frequency has any problem, you can select other TP
frequency.
- DiSEqC Motor : Select DiSEqC Motor type (OFF / 1,2 / USALS)
(In case of DiSEqC 1.2 selected)
- Move : You can change the dish position to West / East.
- Limit : If you want to set limit, press .
- Disable Limit : You can disable East and West Limit.
- Goto Center : Move the dish to the 0 position.
- Set East / West Limit : You can move the dish East or West using / .
Press the to fix East or West limit.
(In case of USALS selected)
- Sat Degree : Satellite location.
- Antenna Position : Press .
- Goto Reference : Move the dish to the 0 position.
- Antenna Longitude : Your longitude at present.
- Antenna Latitude : Your latitude at present.
Note : When you change each parameter, you need to know exact parameter of
LNB to modify L.O.(local oscillator) frequency.
VOL
VOL
Note : When you change each parameter, you need to understand environment
of connecting the receiver and antenna in order for you to set 22KHz and
DiSEqC properly.
After setting, press the EXIT button.
6.1 Getting Started
Through this function, the receiver searches for all the available channels and saves them
in the memory.
Auto Scan <Figure 6-4>
Press / to select satellite which you want to scan. And select “Search type” or
“network Search” option.
- Search Type : Determine searching channels (All channel/ Free channel only/ TV
channel only)
- Network Search : If you set to ON, you can find more transponders through NIT Scan.
To scan more than one satellite, press RED button. You can select one or more
satellite. <Figure 6-5>
VOL
VOL
3) Satellite Scan
<Figure 6-4> <Figure 6-5>
<Figure 6-2> <Figure 6-3>
<Figure 6-6>
If you press the , the selected satellites will be scanned. <Figure 6-6>

14 15
6.1 Getting Started 6.1 Getting Started
Manual Scan <Figure 6-7>
Select transponder which you want to scan.
If you want to change an information of current transponder(Frequency, Symbol Rate
and Polarization), just input information using NUMERIC button.
If you want to add new transponder, press GREEN button.
If you want to delete current transponder, move cursor to the Frequency and press
YELLOW button.
PID Scan <Figure 6-8>
Select transponder which you want to scan.
If you want to change an information of current transponder(Frequency, Symbol Rate
and Polarization), just input information using NUMERIC button.
If you want to add new transponder, press GREEN button.
If you want to delete current transponder, move cursor to the Frequency and press
YELLOW button.
You can also search a channel of the specified transponder by specifying PID
data(Video, Audio and PCR).
<Figure 6-7> <Figure 6-8>
Note : Now you have complete all steps needed for watching programs.
If you could not see the program after finishing these procedures, please
contact a shop where you bought your receiver or installer who installed
your receiver.
You can change the current channel to any other channel you want.
In case you want to select a channel at random without knowing the channel name,
you can navigate between channels untill you fild the channel you want.
If you know the channel number, enter the number and wait 2 seconds till the channel
changed.
If you know the channel name, press and the channel list will appear.<figure 6-9>
4) Select Channel
<Figure 6-9>
In the left side of screen, detailed information of the selected channel will be
displayed. (Satellite Name, Frequency(polar) and Channel Name)
You can navigate between channels with this buttons.
- / : Moves up / down.
- or / or : Moves page up / page down.
- RED : Shows all channels in current group.
- GREEN : Shows channels sorted by alphabet.
- YELLOW : Shows channels sorted by Transponder.
- BLUE : Shows channels sorted by CAS system.
When the scroll bar is positioned on the channel you want to see, press .
VOL
VOL
CH
CH
5) Other Function on Remote Control
Volume Control
While you are watching a program, press or to control volume.
When necessary, press MUTE button to remove the sound of the program.
Then, your receiver goes into mute condition and the mute icon will be displayed.
Press MUTE button again to turn the sound on.
VOL
VOL

1716
6.1 Getting Started
Channel Information
Whenever press the INFO button, the information banner will be displayed for a few
seconds.
If you press the INFO again on the information mode, the detail banner will be
displayed.
TV / SAT switching
If you press TV/SAT, the signal reception path will be changed to RF modulator.
- TV Mode : TV ANT INPUT signal will be out. (front will display “TV”)
- VCR Mode : VCR SCART INPUT signal will be out. (front will display “VCR”)
- SAT Mode : Satellite signal will be out through RF. (front will display channel number)
TV / RADIO switching
You can use this menu when you change a TV channel to a Radio channel or vice
versa.
RECALL(RED)
Return to the previous channel.
Subtitle / Audio
You can adjust the subtitle and audio status of the current channel.
Press AUDIO(GREEN)button, then subtitle and audio related menu will be displayed.
- Audio Mode : Stereo Mono-Left Mono-Right
- Audio Track : All tracks available in this program.
Note : These subtitle and audio parameters are workable only when the
receiving channel supports these functions.
Teletext(YELLOW)
Teletext Service is text data service from Service Provider.
It is available only when the satellite signal carries teletext service data.
PAUSE
This key is used to pause the video. Press once more to resume the video. In pause
mode you can zoom in partial of video.
In pause mode, select position using / / / .
Press to zoom in. Press again to zoom out.
GROUP
When watching TV or listening to Radio, you can get the satellite or favorite channel
group list by pressing the GROUP button on the remote control unit.
Group menu will display only registered satellite and favorite group.
VOL
VOL
CH
CH
6.2 System Setting
This sub menu allows you to set your local time, wake up time, wake up channel and sleep
time. <Figure 6-10>
- GMT Usage : If you set ON, local time is determined by adjusting the differences from
GMT(Greenwich Meantime), according to your location.
- Current Date : If GMT Usage ON, this date is determined by GMT.
If GMT Usage OFF, you can modify this by pressing .
If you set OFF, receiver doesn't refer to GMT. Local time is determined by
adjusting current date and current time.
- Current Time : If GMT Usage ON, this time is determined by GMT.
If GMT Usage OFF, you can modify this by pressing NUMERIC button.
- Local Offset : If GMT Usage ON, Local time is GMT time + Local Offset.
- Wake Up Mode : You can set the cycle of the wake up mode.(Off / Once / Daily)
- Wake Up Time : You can set wake up time by pressing NUMERIC button.
- Wake Up Channel : You can set wake up channel by pressing .
- Sleep Mode : You can set the cycle of the sleep mode(Off / Once / Daily)
- Sleep Time : You can set sleep time by pressing NUMERIC button.
1) Time Setting
<Figure 6-10>
This sub menu allows you to set audio/video output setting. <Figure 6-11>
- Audio Language : Default language of audio when changing channel.
- Subtitle Language : Default language of subtitle.
- Video Format : Video output format(AUTO / PAL / NTSC).
- Output Select : TV SCART output format.(CVBS/RGB)
- Screen Format : TV aspect ratio(16:9 / 4:3 Letter-Box / 4:3 Pan Scan)
- RF Type : If you set PAL in Video Format, this receiver supports PAL B/G, PAL I, PAL D/K
among PAL Standards.
- RF Channel : Sets the channel to display the audio and video signal on your TV.(21~69)
If you select 40, receiver will be displayed at channel 40 on your TV.
- SPDIF : If you set ON, digital audio output is enable.
2) A/V Output Setting

1918
6.2 System Setting6.2 System Setting
<Figure 6-11>
This sub menu allows you to set menu language, OSD transparency, Information and
volume timeout. <Figure 6-12>
- Menu Language : Select the desired language of the menu.
- Transparency : Select OSD transparency of the menu.(1% ~100%)
- Information Timeout : Select the display duration of the information banner.
(1 sec / 2 sec / 3 sec / 5 sec / 10 sec)
- Volume Timeout : Select the display duration of the volume box.
(1 sec / 2 sec / 3 sec / 5 sec / 10 sec)
3) OSD Setting
<Figure 6-12>
- Age Limit : Prevents children or unauthorized people from watching programs.
(Free / 8 above / 12 above / 15 above / 18 above)
- Current Password : Input current password for change your password.
- New Password : Input new password you want to change.
- Verify Password : Input new password one more for confirmation.
Note : The default password is '0000'.
This sub menu allows you to change the password option to unlock or lock some menu
entry and to change password. <Figure 6-13>
- Receiver Lock : If you set ON, receiver asks you to enter PIN code when power on.
- Install Lock : If you set ON, receiver asks you to enter PIN code when entering Installation
menu.
- Channel Lock : If you set ON, receiver asks you to enter PIN code on channels menu.
- Lock Channel Confirm : If you set ON, receiver asks you to enter PIN code when changing
to locked channel.
4) Security Setting
This sub menu allows you to restore the factory set values in case the user has encountered
some problems after changing any new values of channel data and others which may be
in error. <Figure 6-14>
- Delete Radio Channel : Erase all radio channels in database.
- Delete Scramble Channel : Erase all scramble channels in database.
- Delete All Channel : Erase all channels in database.
- Factory Set : Erase all channels and restore default setting.
The receiver will return to factory default parameters.
5) Database Reset
<Figure 6-14>
<Figure 6-13>

2120
6.3 Channels
This sub menu allows you to set up favorite name and favorite lists as you want.
You can choose TV or Radio channels in an alternative way by pressing TV/RADIO button.
This receiver support 8 favorite list.
Press the on the "Set Favorites". The following menu will be displayed. <Figure 6-15>
Press / and . The following menu will be displayed. <figure 6-16>
If you want to change favorite group name, press the RED button.
Press to select the channel that you want to add into favorite channel list.
Press one more to remove the channel that added favorite channel list.
Press EXIT button to return to previous menu.
CH
CH
1) Set Favorites
6.3 Channels
This sub menu allows you to rename the channels and input user PID.
You can choose TV or Radio channels in an alternative way by pressing TV/RADIO button.
You can change channel list group by pressing GROUP button.
Press the on the "Edit Channels". The following menu will be displayed.
<Figure 6-17>
Press to select the channel that you want to edit.
Press in Edit Name to rename the channel, the keypad will be displayed.
You can edit PID by pressing NUMERIC key.
Note : The VIDEO PID, AUDIO PID and PCR PID are very important for optimal
satellite signal reception. We recommend you get professional advice
where available.
2) Edit Channels
<Figure 6-17>
This sub menu allows you to move the channels.
You can choose TV or Radio channels in an alternative way by pressing TV/RADIO button.
You can change channel list group by pressing GROUP button.
Press the on the "Move Channels". The following menu will be displayed. <Figure 6-18>
Press to select the channel that you want to move. Moving icon will be displayed.
Press / / / / NUMERIC button to move the selected channel.
Press one more to place the channel.
Press EXIT button to return to previous menu.
VOL
VOL
CH
CH
3) Move Channels
<Figure 6-15> <Figure 6-16>
<Figure 6-18>
This sub menu allows you to lock the channels for prevent watching this channel.
Once the channel is locked, every time you try to watch the channel, you will be asked to
enter password.
You can choose TV or Radio channels in an alternative way by pressing TV/RADIO button.
You can change channel list group by pressing GROUP button.
Note : If you set "Lock Channel Confirm(refer <6.2>security setting)" to OFF,
you will not be asked to enter password even if the channel is locked.
4) Lock Channels

2322
6.3 Channels 6.3 Channels
Press the on the "Lock Channels". The following menu will be displayed. <Figure 6-19>
Press to select the channel that you want to lock. Lock icon will be displayed.
Press one more to cancel lock. Lock icon will be disappeared.
Press EXIT button to return to previous menu.
<Figure 6-19>
This sub menu allows you to skip the channels.
Once the channel is skipped, every time you try to change channel using / in
non-menu mode, this channel will be skipped.
You can choose TV or Radio channels in an alternative way by pressing TV/RADIO button.
You can change channel list group by pressing GROUP button.
Note : If you try to change channel using NUMERIC button in non-menu mode,
you can watch this channel.
CH
CH
Press the on the "Skip Channels". The following menu will be displayed. <Figure 6-20>
Press to select the channel that you want to skip. Skip icon will be displayed.
Press one more to cancel skip. Skip icon will be disappeared.
Press EXIT button to return to previous menu.
5) Skip Channels
<Figure 6-20>
6) Delete Channels
This sub menu allows you to delete the channels.
You can choose TV or Radio channels in an alternative way by pressing TV/RADIO button.
You can change channel list group by pressing GROUP button.
Note : Be careful!! If you delete channel, you can't watch this channel until re-scan.
Press the on the "Delete Channels". The following menu will be displayed. <Figure 6-21>
Press to select the channel that you want to delete. Delete icon will be displayed.
Press one more to cancel delete. Delete icon will be disappeared.
Press INFO button to delete all channels in current list. You will be asked to enter password.
Press EXIT button to return to previous menu.
<Figure 6-21>
6.4 Guide
This sub menu allows you to get the electronic program guide if available.
If you press GUIDE button, guide menu will be displayed. <Figure 6-22>
Press the and / to see previous/next guide.
Press the / / / to move to other channel.
Press to watch and get the EPG data.
If you press in left side of screen(Event display list).
- If current EPG is selected, return to previous menu and change to selected channel.
- If next EPG is selected, selecting event will be reserved and event color will be
changed.
By pressing TV/RADIO button, you can choose TV or Radio list.
By pressing GROUP button, you can choose channel list group.
If you press RED button, timer menu will be displayed. <Figure 6-23>
CH
CH
CH
CH
VOL
1) GUIDE(EPG:Electronic Program Guide)

2524
6.4 Guide
This sub menu allows you to set the on/off time of your receiver.
If you press RED button in guide menu, timer menu will be displayed. <Figure 6-23>
Press the / to move to other timer.
Press the to change the parameter.
- State : Select the timer cycle of action.(off / once / daily / weekly)
- Date : Select the date using . Calendar pop-up will be displayed.
- Start Time : Input the time using NUMERIC button for your receiver power-on.
- End Time : Input the time using NUMERIC button for your receiver power-off.
- Channel : Select the channel using . Channel list pop-up will be displayed.
CH
CH
2) Timer
<Figure 6-22> <Figure 6-23>
6.5 Games
2) Sokoban
To play the sokoban, you have to push the balls to their correct positions. The balls can only be
pushed, never pulled, so you have to be careful not to push them into a corner where you
can't get them out again.
You can only push one ball at a time.
Press the on the "Sokoban". The following menu will be displayed. <Figure 6-26>
You can select skill using / .
Press the to start game <Figure 6-27>, or press the EXIT button to return previous menu.
Press the / / / to move.
Press RED button to undo previous move. You can undo only one step.
Press GREEN button to restart.
Press YELLOW/BLUE button to jump previous/next level. You can jump between completed
level.
Press EXIT button to quit the game.
VOL
VOL
CH
CH
VOL
VOL
<Figure 6-24> <Figure 6-25>
6.5 Games
Press the on the "Tetris". The following menu will be displayed. <Figure 6-24>
You can select skill using / .
Press the to start game <Figure 6-25>, or press the EXIT button to return previous menu.
Press the to rotate the block.
Press / to move the block.
Press DOWN button to drop the block.
In the right top small window, you can see next block.
Press EXIT button to quip the game.
VOL
VOL
VOL
VOL
1) Tetris
<Figure 6-26> <Figure 6-27>

2726
6.5 Games
Press the on the "Snake". The following menu will be displayed. <Figure 6-28>
You can select skill using / .
Press the to start game <Figure 6-29>, or press the EXIT button to return previous menu.
Press the / / / to move.
If the snake is passed through the GREEN icon, the length will be increased.
If the snake is passed through the RED icon, the length will be decreased.
If the snake is passed through the BLACK icon(block), the game end.
Press EXIT button to quit the game.
VOL
VOL
CH
CH
VOL
VOL
3) Snake
<Figure 6-28> <Figure 6-29>
6.6 System Information
You can check the current information about your receiver such as receiver model name,
S/W version, H/W version, manufacturing date, etc. <Figure 6-30>
Note : This information is necessary when you download new software or you
need to repair the receiver.
<Figure 6-30>
Remedy
Connect power cord properly
into the power socket.
Connect two terminals correctly
with RCA or RF cable.
Connect the antenna cable
correctly.
Adjust the direction of antenna.
Check the cable connections,
LNB and other equipment
connected between the LNB
and the receiver or adjust the
antenna.
Type the setting value correctly.
Use TV of same mode.
Use the NTSC/PAL converter
connected to the receiver and
TV.
Change the batteries.
Switch off the light.
Aim the remote control at the
receiver.
Possible causes
AC power cord
disconnected.
Wrong connection of the
video/audio output to TV
input terminal.
Wrong connection of
satellite antenna cable.
Wrong direction of satellite
antenna.
No signal or weak signal.
Wrong setting of channel
information in MENU screen.
Your TV mode is different
from satellite broadcasting
mode.
Battery exhausted.
Fluorescent light interfering
with the remote controller.
Remote controller is
incorrectly aimed.
Problem
LED on front panel
does not light.
No Picture or sound.
Black-and-white
screen or V-Hold.
The remote
controller is not
working.
Trouble Shooting
There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does
not work properly, check it according to the procedures shown in the table below.:

2928
Specifications
IEC 169-24,female
950MHz ~2150MHz
-65dBm ~-25dBm
14/18V, max 400mA
22KHz
Ver 1.0/1.1/1.2/USALS Compatible
QPSK
2Msps ~45Msps
Auto conversion
32bit processor (80MHz)
8Mbyte
2Mbyte
32Kbyte
Main Proflie @Main Level
up to 15M bits/s
720 X 576, 720 X 480
NTSC, PAL
4:3,16:9
Mono,Dual mono,Stereo,Joint Stereo
32,44.1 and 48 KHz
9pin D-sub male, Max 115K bps
NEC-IR
up to 7 Meter
Fully DVB compliant
Connector
Frequency range
Signal level
LNB supply
LNB switch control
DiSEqC
Front end
Symbol rate
SCPC and MCPC Capable
Spectral inversion
Processor
SDRAM
FLASH
EEPROM
MPEG 2
Data Rate
Resolution
Video format
Aspec Ratio
DVB compliant
MPEG 1 layer 1 &2
Type
Sampling rates
Connector
Code
Operating condition
System capabilities
LNB/Tuner input
Demodulator
System resource
Video Decoder
Teletext
MPEG Audio
Serial data interface
Remote control
Max 20W
90V - 250V ~
50Hz - 60Hz
Video out (CVBS, RGB)
Audio out
Video out (CVBS)
Video In (CVBS, RGB)
Audio out
1 X RCA cinch
2 X RCA cinch
1 X RCA cinch
9pin D-sub
IEC 169 - 24
IEC 169 - 24
IEC 169 - 2
IEC 169 - 2
Power consumption
Supply voltage
Supply frequency
TV SCART
VCR SCART
VIDEO
AUDIO L/R
SPDIF
Serial data
Digital tuner input
Loop-through Digital tuner
Terrestrial ant input
RF modulator output
Power supply
Rear Panel
connectors
IEC 169-2, female/male
470 ~860MHz
21 ~69
260 X 54 X 232(mm)
1.8 Kg
Connector
Frequency
Output channel number
Size (W X H X D)
Weight (Net)
RF modulator
PAL G/I/K TV Type
Physical
Specification