MAX Smart Home MAX-One-HD1a User manual

User Manual
Max1 Motion Activated LED Light
MAX-One-HD1a
www.maxsmarthome.com
Smart
Home
M A
TM

GETTING STARTED
SIMPLY PLUG IT IN!
Simply plug it into a standard 120VAC outlet.
MODE POSITION (TOP TO BOTTOM)
Select the desired Mode for your MAX:
USB POWER OUTPUT - STANDARD USB
DIMMING & RESET BUTTON
FIG3
Position 1
Night Light Mode
Position 2
Motion Activated Light Mode
Position 3
Security Mode - Activated by
Motion Sensor
Position 4
OFF
Press and hold down to Increase
or Decrease Brightness in any Mode.
Reset: If Alarm has been sounded,
press button once to reset.
Reset Button
Dimming Button
USB Port can be used to charge
device requiring 2.1 AMPs. Simply
plug in your standard USB cable to
the standard USB port on the bottom
of the MAX.
FIG1

FLASHLIGHT / AREA LIGHT SELECTION
To use Flashlight Mode, unplug unit from
AC power and place in any mode position
except for OFF.
Press Dimmer /Reset Button to toggle
between front light and ashlight.
FEATURES
LIGHTING:
Night Light
Area Light
Emergency Light
Flashlight
Motion Activated Light
SAFETY:
Fire Alarm and Carbon Monoxide Alarm
Activated Evacuation Light.
Fire Alarm and Carbon Monoxide Alarm
enhanced frequency for hearing impaired.
Fire and Carbon Monoxide Alert Strobe Light
POWER:
USB Wall Charger
Portable USB Charger
Emergency Power Supply for Smart Devices
Rechargeable Battery
CHARGING THE MAX WITH MICRO USB
You can charge the MAX with the Micro USB
port on the back of the MAX below the AC
Plug. You can charge from a Standard USB
port from a computer or a USB wall adapter.
Micro USB charger

CAUTION
Risk of Electric Shock and Fire Hazard. For adult use
only. This is not a toy and Is not intended for use by
children. For safe use, plug only into exposed wall
outlet where the device is ventilated and cannot
contact bed covering or other material. Do not use
with extension cords. Designed for indoor use only. This
product is not a Smoke Detector or a Carbon Monoxide
Detector. You should make sure you have Smoke
Detectors and Carbon Monoxide Detectors in all rooms
of your home. Recommendations for placement can be
found at the National Fire Protection Association at
www.nfpa.org. This product is not intended to replace
standard re protection, carbon monoxide protection,
or security protection equipment or services.
RADIATION EXPOSURE STATEMENT
This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with a minimum distance of 20 cm between the
unit and your body.
Invented by people who care about saving lives.
Quality Designed in the United States
Perfectly assembled in China
US and International Patents Pending

WARRANTY REPLACEMENT PROCEDURES
1. Go to www.maxsmarthome.com/returns or Call
1-855–999-8139 (Toll Free) to get a Return Authorization
Number (RA#) and shipping instructions.
2. Return the MAX Smart Home product, freight prepaid
to address provided in shipping instructions. Product
returned must have an RA# included.
3. The original purchaser will be asked to send the
product, a copy of the sales receipt for the product,
your name, address, phone number and a description
of the problem.
MAX Smart Home is a trademark of MAX Smart Home LLC
www.maxsmarthome.com
LIMITED ONE YEAR WARRANTY
MAX Smart Home warrants this product to be free of
defects in workmanship and/or materials for one
year from the date of purchase. If such defect
should arise during the one year period, MAX Smart
Home will, at its option, either repair or replace the
product without charge. This warranty does not cover
damage caused by lightning, accident, misuse, or
alterations to the product.