Max Bepop CPM-200G User manual

CPM-200
OPERATION MANUAL
●Readthismanualbeforeoperation.
●Keepthismanualinasafeplace.
●Itisprohibitedtoreproducepartorallofthemanualwithoutourpermission.
●Theinformationinthemanualissubjecttochangewithoutpriornotice.
IL22610(00/02)

2
CONTENTS
Contents
BeSuretoReadThese
Introduction …………………………………………………………………………………………………………… 3
Conventions Used in This Manual ………………………………………………………………………………… 3
Precautions for Use ………………………………………………………………………………………………… 4
Disclaimers …………………………………………………………………………………………………………… 4
ProductSpecications ……………………………………………………………………………………………… 5
BeforeUse
Package Contents …………………………………………………………………………………………………… 6
Component Names…………………………………………………………………………………………………… 6
Main Key Functions ………………………………………………………………………………………………… 6
MachinePreparation
Loading the Tape……………………………………………………………………………………………………… 7
Inserting the Rellable Ribbon Cartridge ………………………………………………………………………… 8
Replacing the Ribbon Rell ………………………………………………………………………………………… 9
Installing (Replacing) the Cutting Tool (Blade) ……………………………………………………………………11
Adjusting the Cutting Pressure…………………………………………………………………………………… 12
Connecting the Cable and Turning On the Power ……………………………………………………………… 13
BepopPCEXSoftwareInstallation
Please read before installing. …………………………………………………………………………………… 14
BepopPC EX Printer Driver Installation ………………………………………………………………………… 15
CPM-200 IPAddress Settings …………………………………………………………………………………… 20
Firstlet’sgiveitatry!
Make a sign layout.………………………………………………………………………………………………… 22
Check the remaining sheet length. ……………………………………………………………………………… 25
Adjusting the print tempurature…………………………………………………………………………………… 26
Making a cutting layout, and cutting a sign……………………………………………………………………… 27
How to apply cut letter designs…………………………………………………………………………………… 28
Uninstallmethod
How to uninstall “BepopPC EX”. ………………………………………………………………………………… 31
Printer Uninstall …………………………………………………………………………………………………… 32
HowtouseBepop-net …………………………………………………………………………………………… 32
TroubleShooting …………………………………………………………………………………………………… 33

3Be Sure to Read These
BeSuretoReadThese
Introduction
Thank you for purchasing the CPM-200.
The CPM-200 is a 200 mm width signs and labels creating machine that enables anyone to easily create
displays, such as signboards and guide displays, and colorful, high quality labels. To maximize service life of
the product, please use the CPM-200 in accordance with operation manual.
ConventionsUsedinThisManual
■Indications
The manual and machine use various indications to ensure that you can use the machine safely and correctly.
The following describes the indications:
WARNING NEGLIGENCEOFTHISCOULDLEADTOADEATHORSERIOUS
INJURYOFAWORKER.
CAUTION NEGLIGENCEOFTHISCOULDLEADTOANINJURYOFA
WORKER,DAMAGEYOURMACHINE,ORCAUSECREATEDDATA
TOBELOST.
■Symbols
Denotes“whatyou
shouldbeawareof.”
A specic caution is given in
or close to this symbol.
Denotes“whatyou
mustnotdo.”
A specic prohibition is given in
or close to this symbol.
Denotes“whatyoumust
do.”
A specic instruction is given
in this symbol.

4
Be Sure to Read These
PrecautionsforUse
WARNING
●Donotinsertanyforeignobjectintothemachine,
suchasanger,pen,wire,etc.
It could malfunction or result in a re, electric shock, or injury.
●Neverputahandoranobjectintoacuttersection.
It can both cause machine damage and personal injury.
●Usethesuppliedpowercord.
Not using it could result in a re or electric shock.
●Obtainpowerdirectlyfromanelectricaloutlet.Do
notputmultipleloadsontheelectricaloutlet.
It could cause a re.
●Donotmodifythepowercord.
Doing so could cause a re or electric shock.
●Neverplaceaheavyobjectonapowercord.
It may damage the cord, resulting in a re or electric
shock.
●Donotuseabundledpowercord.
The emitted heat may cause a re or malfunction.
Be sure to unbundle the power cord before use.
●Donotconnectordisconnectapowerplugwitha
wethand.
You could receive an electric shock.
●
Donotoperatethemachinewithwethandsorwetclothes.
You could receive an electric shock.
●Donotplaceapaperclothonthemachinewhenitis
connectedtoanoutlet.
Doing so could cause a re or malfunction.
●Whendisconnectingthepowerplug,holditdirectly;
neverpullonthepowercord.
 Pulling on the cord can damage it, resulting in a re or
electric shock.
●Ensurethatnowaterorchemicalsaresplashed
overthemachines.

If water, etc., gets inside for some reason, disconnect the
power plug immediately from the electrical outlet, and
contact your dealer for repair. If the machine
is used in
such a state, it could malfunction or result in a re or
electric shock.
●Donotusethemachineifithasasymptomofaproblem.
Such as smoke, abnormal sound, or foul odour.
Using the machine in such a state could result in a re
or electricshock.
Insuchacase,immediatelydisconnectthepower
plugfromtheelectricaloutlet,andcontactyour
dealerforrepair.
●Neverdisassembleorremodelthemachine.
It could result in a re, electric shock, or trouble.
●Runthemachineonlyontheindicatedsupply
voltage.
Use of any other voltage could result in a re or trouble.
● Besuretogroundthemachine.
Otherwise, if a short circuit occurs, a re or electric
shock may result.
● Cleanthepowerplugperiodically.
Dust accumulated over a long period could cause a re
or trouble.
●Keepthecuttingtool(blade)outofthereachof
children.
If swallowed, seek immediate medical attention.
CAUTION
●Installthemachineonaatsurface.Donotinstallin
anunstablelocation,suchasonawobblyplatform
oraninclinedsurface.
The machine could fall over or fall from the platform and
cause injury or malfunction.
●Donotusethemachineunderdirectsunlight,ina
hot,humidlocation,orwhenthereiscondensation.
It may cause unstable operation or a malfunction.
●
Donotshareanelectricaloutletwithanydevice
(airconditioner,refrigerator,microwave,ofce
automationequipment,etc.)thatrequiresalarge
capacity.

It could lower the supply voltage and cause the machine
to malfunction.
●DonotdirectlytouchtheUSBconnectorwithyour
hands.
Static electricity may cause trouble.
●Whennotusingthemachineforalongtime,besure
todisconnectthepowerplugfromtheelectrical
outletforsafety.
●Whenmovingthemachine,besuretodisconnect
thepowerplugfromtheelectricaloutlet.
Moving the machine with the power plug connected to
the electrical outlet may damage the plug or cord and
cause a re or electric shock.
●Whenprintingorcuttingdoesnotfunctionproperly
duetojammingofanadhesivetape,ribbonrell,or
foreignobjectinsidethemachine,besuretoturnoff
thepowerbeforeeliminatingjamming.
Otherwise, you could be injured by abrupt activation of
the machine.
●Whenopeningorclosingadoorcover,becareful
nottogetahand,etc.,caught.
●Whenmovingthemachine,besuretoclosethedoor
coverandholdthebottomofthebodytocarryit.
Neglecting this could cause an injury or trouble.
●Whenreplacingthecuttingtool(blade),besureto
turnoffthepower.
Otherwise, you could be injured by abrupt activation of
the machine.
●Notethattheedgeofthecuttingtool(blade)isvery
sharp.
Do not touch it. You may be injured.
●Nevertouchtheprinthead.
Immediately after printing, it is very hot and could burn
you. Also, if the printing head is thumbed, it may cause
trouble.
●Datasavedinapersonalcomputercannotbesaved
permanently.
We cannot be responsible for damage due to loss of
data attributable to trouble or repair, or lost prot.
Disclaimers
MAX will not be held responsible for any damages that occur as a result of not following the instructions in this
manual, damages and lost prots resulting from not being able to use the machine (malfunction), or any relevant
secondary damages.

5Product Specications
ProductSpecications
Product CPM-200G
Printer section
Printing method Thermal transfer
Printing density 300dpi
Printing speed 1.0”/sec. (25mm/sec.)
Cutter section Resolution 0.001”/step (0.025mm/step)
Cutting speed 4.7”/sec. max (120mm/sec. max) (axial direction)
Maximum output range 8” × 78.7” (200 × 2,000mm)
Interface USB2.0
LAN 100baseTX
Working environment Temperature 50 - 80°F(10 - 27°C) (77°F(25°C) recommended for process color)
Humidity: 35 - 70 % (No dew condensation allowed)
Power input AC 100 - 240 V 50/60 Hz
Rated current 2A
Outer dimensions 13.8” × 12.4” × 12.4” (425mm × 315mm × 315mm)
(W) × (D) × (H)
Mass (Main body only) 34.2lbs (15.5 kg)
* Design, specications, and the like are subject to change without notice.
FCCCAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.

6
Before Use
BeforeUse
PackageContents
Open the package and conrm that all of the following items are included.
(1) CPM-200 (2) Power Cord (3)Cutting Tool (Blade)
(1 pc.) (4)
Weeding Tool (5) Squeegee
(6) Blade Holder
(Attached upon
shipment)
(7) Blade Holder
Replacing Spanner (8)
PC Software
(CD-ROM) (9)
Operation Manual
(this manual)
ComponentNames
[FrontofMainBody] [BackofMainBody]
Door Cover
Tape Outlet
LED Lamp
Cutting Pressure Control Dial
Scissors Button
Tape Reverse Button
Tape Feed Button
Power Button USB Connector
Front bar
Opening/Closing Lever Print Head
Blade Holder
Cutting Head
Tape Retainer
Sprocket Pins
Power Connector
Tape Holder
[Consumables]
MainKeyFunctions
Powerbutton : Used to turn on/off the power.
LEDlamp : Illuminated in green when the power is turned on.
It is illuminated or blinks in red when informing you of an error.
(For details on errors, see the status monitor information displayed on the PC screen.)
Tapefeedbutton : Tape is fed while the button is held down.
Tapereversebutton : Tape is reverse-fed while the button is held down.
Scissorsbutton : Used to fully cut the tape.
Tape Roll
Ribbon Rell
Rellable Ribbon
Cartridge
Hinges
Ribbon Gears (4 pcs.)
Hinges
Sprocket Holes

7Machine Preparation
MachinePreparation
LoadingtheTape
1
Pull up the opening/closing lever to open the door
cover.
5
Align the holes in the tape with the right and
left sprocket pins.
Opening/Closing Lever
Door Cover Sprocket Pins
Ensure that the sprocket pins are inserted in the
sprocket holes in the tape and that the tape is
loaded straight on the roller.
If the sprocket pins are not inserted into the holes
or the tape is not straight, the tape will not be fed
properly.
2
Pull up the front lever. Load the tape straight.
Front bar
Vinyl Holder
Yes No
3
Place the tape on the tape holder.
Vinyl
6
Lower the front lever to retain the tape.
Front bar
4
Pull the tape forward and feed it under the bar
at the front. Then, feed the tape further into the
rollers in the back.
Roller in the Back
Vinyl Retainer
Front bar
7
Close the door cover until it “clicks” to lock.

8
Machine Preparation
InsertingtheRellableRibbonCartridge
1
Pull up the opening/closing lever to open the door
cover.
3
Fit the Hinges of the rellable ribbon cartridge into
the slots in the back of the door cover. Ensure
that the ribbon gear color matches the colour
printed on the CPM-200.
Opening/Closing Lever
Door Cover
Orange
Green
4
Turn the rellable ribbon cartridge upward, using
the Hinges as leverage. Push it in rmly until
the rellable ribbon cartridge locks with a “click”
sound.
2
Check for slack in the ribbon rell.
If there is slack in the ribbon rell, hold the
rellable ribbon cartridge as shown in the gure,
turn the ribbon gear in the arrow-indicated
direction, and take up the slack.
Click
Ribbon Refill
Hinges
Hinges
RemovingtheRellableRibbonCartridgefromtheCPM-200
1
Open the door
cover. Hold the
rellable ribbon
cartridge catch
and pull it forward.
Catch
CAUTION
Donottouchtheprinthead.
Getting burned or a malfunction may
result.
2
Turn the cartridge
downward and
then pull it out.

9Machine Preparation
ReplacingtheRibbonRell
1
Open the door cover. Hold the rellable ribbon
cartridge catch and pull it forward.
5
Prepare the new ribbon rell.
Catch
Transparent Frame
Retaining Tape
Take Up Core
Take Up Core
2
Turn the cartridge downward and then pull it out.
6
Insert two gears (one orange, one green) into
the take up core on the transparent frame side.
Ensure the at edges are face up.
※交換手順の詳細は箱に印字の説明を参照ください。
リボンギヤ取付位置とリボン取付方向
赤
緑
赤
緑
透明枠
Transparent FrameRetaining Tape Green
Orange
Flat
edge up
Flat
edge up
3
Open the cartridge cover and remove the old
ribbon rell.
7
Place the transparent frame side of the ribbon
rell into the cartridge on the at cover side.
If the cover is difcult to open, pull up the location
indicated as ①and then ②.
Green
Orange
Label
Flat Cover
4
Remove the four gears (two orange, two green)
from the ribbon rell take up core. Firmly insert the protruding part of the orange gear into the recessed part of the cartridge.
Orange Green
The shape of the orange gears are different from
that of the green gears.
Orange Green
Ribbon Refill
Flat Cover
①
②

10
Machine Preparation
8
Remove the retaining tape.
10
Firmly close the cartridge cover until a “click”
sound is heard.
Retaining Tape Click
Click
9
Insert the remaining gears (one orange, one green)
into the other take up core. Ensure the at edges
are face up.
If the cover does not close
Orange
GreenFlat edge up
Flat edge up Check the following in steps
7
and
9
.
◦
Is the transparent frame inserted in the
correct orientation?
◦
Is the protruding part of the orange gear
rmly inserted into the recessed part of the
cartridge?
11
Turn the ribbon gear in the direction of the arrow
until the ribbon rell colour is fully exposed.
Place the ribbon rell in the cartridge.
Firmly insert the protruding part of the orange gear
into the recessed part of the cartridge.
Ribbon Gear
12
Check that the ribbon gear is inserted in the
correct orientation.
Orange
Orange
Green Green
Transparent Frame
Flat Cover

11 Machine Preparation
Installing(Replacing)theCuttingTool(Blade)
1
Check that the power is turned off, and pull up the
opening/closing lever to open the door cover.
3
Prepare a new cutting tool (blade) and remove
its protective cap.
Opening/Closing Lever
Door Cover
Blade
Edge of the Blade
Protective Cap
4
Insert/drop the blade into the blade holder
and tighten the blade holder cap. DONOT
push the blade into the holder otherwise it
will not cut correctly.
2
Move the cutting head to the center manually.
Loosen and remove the cap of the blade holder.
WARNING
Keepthecuttingtool(blade)outofthereach
ofchildren. If swallowed, seek immediate medical
attention.
CAUTION
Whenattachingorremovingthecuttingtool(blade),
besuretoturnoffthepower.Otherwise, you could be
injured by abrupt activation of the machine.
Donottouchtheedgeoftheblade.Youmaybeinjured.

12
Machine Preparation
AdjustingtheCuttingPressure
Cutting depth is adjusted by changing the blade pressure (cutting pressure).
The blade may cut too much or fail to cut depending on the type of material, temperature, and so on.
Therefore, we recommend advance testing and adjustment of the cutting pressure.
Anappropriatecuttingpressureleavesaslighttraceonthereleaseliner.
■ If the tape is not properly cut and cannot be
peeled off, the cutting pressure is set too low.
Increase the dial value, in steps of half
a graduation, so that the tape will be cut
properly.
High
■ If the release paper has also been cut (as
far as the back of the release paper), the
cutting pressure is too high.
Decrease the dial value, in steps of half
a graduation until the release paper is no
longer cut.
Low
CAUTION
Adjustthecuttingpressurebeforeuse.
Continuing to use the machine with excessive cutting pressure can reduce the service life of the
cutting tool (blade).
It would also cut the release paper and could cause the machine to malfunction.

13 Machine Preparation
ConnectingtheCableandTurningOnthePower
1
Connect the power cord to the power connector.
(Load the tape, rellable ribbon cartridge, and
blade in advance.)
3
4
Connect the CPM-200 to the PC with the
connection cable.
Press the power button to turn the power on.
A green lamp will illuminate.
2
Insert the power plug into an electrical outlet.
Know the remaining tape length by checking the holes!
You can check the remaining length by comparing the length between the origin hole
and the remaining length hole on the edge of the tape.
[Alternative method]
Check the remaining tape without the ruler by using the sprocket
holes. Starting with “zero” at the closest sprocket hole to the right of
the origin point, count the holes until you reach the remaining length
hole. The number of sprocket wholes × 1meter is the approximate
remaining tape length.
① Align the origin point on the rulerwith the origin hole on the tape
roll. (The ruler is printed on the individual box of the tape roll.)
②
Check the position of the remaining length hole on the same ruler
(in meters). In the example, as the remaining length hole is
positioned between “9” and “10” , the remaining length is more
than 9 meters and less than 10meters.
Tape
Origin
Sprocket
Hole
Origin
Hole Remaining
Length Hole
Ruler for checking the remaining tape length
Origin

14
BepopPC EX Software Installation
BepopPCEXSoftwareInstallation
Pleasereadbeforeinstalling.
1. Max Company Limited in Japan owns the copyright to this software.
2. It is prohibited to use or reproduce part or all of this software and manual without the prior consent of Max.
3. This software and manual are only allowed to be used under the end user licensing agreement for this
product.
4. The information described in the software specications and manual is subject to change without prior
notice.
5. The names of organizations and individuals mentioned in the samples created with this manual are
ctitious and have nothing to do with the existing organizations and individuals.
MicrosoftandWindowsaretheregisteredtrademarksofU.S.MicrosoftCorporationintheU.S.A.andother
countries.
Othercompanynamesandproductnamesthatmaybementionedhereinaretheregisteredtrademarksoftheir
respectivecompany.
ComputersCompatiblewithBepopPCEX
Please use a computer which satises the following specications. The following suggested specications do
not constitute a guarantee.
Suggested
Specications
● Operating System: Windows 10/8.1/8/7
● RAM that is compatible with Microsoft operating systems.
● More than 100MB of usable space on hard disc.
● DOS/V computer.
PrecautionsforInstallation
Please observe the following warnings and restrictions related to the software or printer driver installation.
WARINGSANDRESTRICTIONS
●Wheninstallingthesoftware,itisnecessarytolog-intothecomputerunderan“Administrators”account.
●Restartaftercompletinginstallation.Inthecasethatmultipleusersaresigned-in,carryouttheinstallationafter
theotherusershaveloggedoff.
●InthecasethatyouareinstallingtoaLAN/WANconnection,pleasecontactyoursystemadministrator.
●AlwaysusetheincludedCDtoinstall/uninstallthesoftware.

15 BepopPC EX Software Installation
BepopPCEXPrinterDriverInstallation
1
Close all active applications and software before
beginning installation.
2
Place the attached CD-ROM into the driver. Click
“continue” in the “User account settings” window.
* USB Installation
To install the printer driver please observe the
following procedure, not observing the procedure
may result in driver installation failure.
1) Connect the printer to the computer USB port.
2) Turn on the printer (check that the LED light
above the power button is green).
3) Begin the driver installation program.
3
The BepopPC EX setup menu will appear. Click on
“Setup of the BebopPC EX”.
4
Click on “Next”.
5
Read the License Agreement. After understanding
and agreeing to the Terms and Conditions, please
click “Next”.
6
Select “Complete” and click next.
* “Complete” will install all les.
* “Compact” will install all les except original fonts.
7
Click the “Next” icon.
(Choose the appropriate destination folder if
necessary.)

16
BepopPC EX Software Installation
8
Check that the program folder is “BepopPC EX”,
and then select “Next”.
9
Click the “Install” button.
10
The installation process will begin.
11
Check the box next to, “Installs the printer driver
right away” and click “Finish”.
12
Select CPM-200 from the “List of models”, and click
“Next”.
13
Follow the appropriate procedure for “USB
Cable Driver Installation” or “LAN Cable Driver
Installation”.
Page 18/19

17 BepopPC EX Software Installation
[Messagesdisplayedduringinstallationprocedure]
* The following messages will be displayed during the installation process. This product has passed our company’s strict
quality control standards, and despite the messages this software can be used without problems.
Whenthemessageisdisplayed,pleaseclick“Install”,“Installthisdriversoftwareanyway”,or“ContinueAnyway”.
* The following messages have been shortened for explanation purposes.
* The content and order of the messages may change depending on the computer and operating environment.
■MessagedisplayedinWindows/10/8.1/8 ■MessagedisplayedinWindows7
* Taking a long time to make a selection, or taking a long time connect the printer to the USB port and turning on the power
may result in a failed installation. In this case please uninstall and re-install the software.

18
BepopPC EX Software Installation
[USBCableDriverInstallation]
1
Select “USB Cable” and click on the “Next>” button.
* Printer must be used with a USB connection after this
installation.
2
Click on “Install”.
3
The “Port Monitor Install” or “Driver” install will start
automatically.
* (No Reply) may be displayed on occasion. Please wait
for install to proceed.
4
Select “Yes, restarts immediately” and click “Finish”.
* If other programs were not closed before the installation,
select “No” and restart the computer after closing other
programs.
5
After restarting the computer, the program will be
ready for use.
* BepopPC EX or the printer may not operate correctly
without restarting the computer. Please restart the
computer before operation.

19 BepopPC EX Software Installation
[LANCableDriverInstallation]
1
Select “LAN cable” and click “Next”.
2
Click the “Install” button.
3
The “Port Monitor Install” or “Driver” install will start
automatically.
* (No Reply) may be displayed on occasion. Please wait
for install to proceed.
4
Set the Port Name and IP Address on the computer.
After inputting the Port Name and IPAddress on
the computer, click “OK”.
* Ask your network administrator about the correct IP
Address.
* The IP Address should include the first 9 digits of the
computer you are using(3 digits for first three boxes).
The last three digits should be a number that will
not conflict with other devices connected to the LAN
network.
* When using multiple CPM machines, the Port Name and
IP Address must be unique to the machine.
5
Select “Yes, restarts immediately” and click “Finish”.
* If other programs were not closed before the installation,
select “No” and restart the computer after closing other
programs.
6
Restart the computer.
* BepopPC EX or the printer may not operate correctly
without restarting the computer. Please restart the
computer before operation.
7
Next it is necessary to set the IP address on the
printer. Follow the instructions for “CPM-200 IP
Address Settings”.