Maxair CAPR User manual

P/N 03521015 Rev Q Page 1
User’s Instructions
CAPR®Systems

Page 2 P/N 03521015 Rev Q
Copyright© Bio-Medical Devices Intl. All rights reserved.
For more Information:
U.S./ Canada International CE Notied Body No: 0194
Telephone:
800-443-3842/ 949-752-9642
Fax:
949-752-9658
Website:
www.maxair-systems.com
E-mail:
[email protected]
Shipping/ Mailing Address:
Bio-Medical Devices Intl
17171 Daimler Street
Irvine, CA 92614
USA
Telephone:
49-511-39 08 95 30
Fax:
49-511-39 08 95 39
Website:
www.mdi-europa.com
E-mail:
[email protected]
Shipping/ Mailing Address:
Mdi Europa GmbH
Langenhagener Straße 71
D-30855 Langenhagen
Germany
Telephone:
[phone]
Fax:
[phone]
Website:
www.inspec-international.com
E-mail:
[email protected]
Shipping/ Mailing Address:
INSPEC International Ltd
56 Leslie Hough Way
Salford
Greater Manchester
M6 6AJ
United Kingdom
** IMPORTANT - PLEASE REGISTER YOUR HELMET AND BATTERY WITHIN 30 DAYS **
Please take a moment to register at http://www.maxair-systems.com/warranty.html.

Page 3 P/N 03521015 Rev Q
MAXAIR Limited Warranty
MAXAIR Limited Warranty: The BMDI (Bio-Medical Devices Intl) limited warranty provides, subject to the following limitations,
that each MAXAIR Systems Helmet and Lithium Ion Battery will be free from defects in material and workmanship and will
conform to BMDI’s specications for that particular product. This limited warranty is in e󰀨ect for a period of one year (12 calendar
months) from the date of original purchase.
Limitation of Remedies: Within the limited warranty period, it is the sole discretion of BMDI to elect which remedy, repair,
replacement or combo to provide, as long as Buyer has not altered the said products in any way and has maintained said
products in accordance with BMDI’s recommendations. BMDI shall have a reasonable amount of time after determining that a
defective Product exists to repair or replace a defective Product. BMDI’s replacement product under this limited warranty will
be manufactured from new and serviceable used parts. BMDI’s limited warranty applies to repaired or replaced products for
the balance of the applicable period of the original warranty, or ninety days from the date of shipment of a repaired or replaced
Product, whichever is longer.
Limitation of Damages: BMDI’s ENTIRE LIABILITY FOR ANY DEFECTIVE PRODUCT SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE FOR THE DEFECTIVE PRODUCT.
Return Material Authorization (RMA)
No Product may be returned directly to BMDI without rst contacting BMDI Customer Service, 1-800-443-3842, for a Return
Material Authorization (“RMA”) number. If it is determined that the product may be defective, BMDI Customer Service will provide
an RMA number and instructions for product return. An unauthorized return, i.e. one for which an RMA number has not been
issued, will be returned to the customer at the customer’s expense. Authorized returns are to be shipped prepaid and insured to
the address on the RMA in an approved shipping container. Your original box and packaging materials should be kept for storing
or shipping your product.
Notication of Status of Decontamination (SOD)
A Status of Decontamination (SOD) certication, signed by the institution’s Infection Control Director, must accompany
all returned product(s). This certication must be a󰀩xed to the outside of the box containing the returned product(s). The
certication is to clearly state 1) the decontamination status of the returned product(s) relative to their having been exposed to
any pathogenic, toxic, or otherwise harmful contaminants, and 2) the list of contaminants the product(s) may have been exposed
to, that could jeopardize the health of all BMDI receiving personnel who may handle the product(s) during unpacking.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE OF THE BMDI LIMITED WARRANTY. BMDI
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE PRODUCTS, INCLUDING ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF BUYER WITH RESPECT TO ANY CLAIM RELATING TO THE MAXAIR
SYSTEMS HELMET AND LI-ION BATTERY, WHETHER ARISING AT LAW OR AT EQUITY, OTHER THAN CLAIMS FOR
PERSONAL INJURY PROXIMATELY CAUSED BY A DEFECT IN THESE ITEMS.
Trademarks MAXAIR®and CAPR®are registered trademarks of Bio-Medical Devices Inc.

Page 4 P/N 03521015 Rev Q
Table Of Contents
1. Warnings, Cautions, Notes, Symbols 7
1.1 Important Information 7
1.2 S- Special or Critical User’s Instructions 8
1.3 SYMBOLS – General and Packaging 9
2. Regulatory Marking Denitions 10
2.1 Marking Denitions 10
3. Introduction 11
3.1 Part Numbers Reference 11
3.2 Approved System Conguration Components 13
3.3 CAPR Systems 17
3.3.1 Systems and System Components 17
3.3.2 Systems Conguration Possibilities (Trees) 19
3.4. Applicability of Earlier Version Components and Assemblies 25
3.4.1 Filter Cover Cap (FCC), 2061-08 (01031284) 25
3.4.2 Lithium-Ion Batteries (LIBS) - 2500-36TSC (01532104) and 2500-30TSC (01532116) 26
3.5 Standard System Components and Order and Part Numbers 27
3.6 Helmets 28
3.6.1 Common Helmet And Liner Characteristics 28
3.6.2 Helmet Assemblies 29
3.6.3 Characteristics Details (Refer to pages 20-21) 30
3.6.4 Helmet Symbol Denitions 32
3.7 2365-02SM/ML (01031291, 01031316) Overview 32
3.8 Battery, Belt, and Charger Overview 33
4. Unpacking Standard System Components and Parts
Identication 34
4.1 Unpacking the 2081-03 ( 03531001, 03531021, 01031269, 2590-05)CAPR Helmet 34
4.2 Unpacking the 2500-36TSC (01532104) Battery 35
4.3 Unpacking the 2000-76 Battery Belt 36
4.4 Unpacking the 2600-01 (01432089) Battery Charger 37
4.5 Unpacking 2365-02SM (01031316) and 2365-02ML (01031291) DLC (Disposable Lens Cu󰀨) 38
5. Standard System Set Up 40
5.1 Components Check List 40
5.2 Setting Up 40
5.3 Assemble and Disassemble Components 40
5.4 Inspections 41
5.5 Warning Device: Yellow LED Air Flow Indicator Check - Bou󰀨ant Cap Method 41
5.6 Warning Device: Yellow LED Air Flow Indicator Check - Tape Method 43
6. Standard System Donning and Do󰀩ng 44
7. Comfort Strips 48
8. Li-Ion Battery 49
9. Charger 50
10. Helmet 53
11. Helmet Liner 54

Page 5 P/N 03521015 Rev Q
12. Filter Cartridge 56
13. Filter Cover Cap (FCC) 57
14. Disposable Lens Cu󰀨 (DLC) 59
15. DLC Shroud 67
16. DLC Double Shroud 70
17. HE DLC Pre-Filter Hood 73
18. XP DLC Pre-Filter Hood 76
19. HE DLC Hood with Heavy Loading Filter (HLF) 79
20. Quick Cu󰀨 83
21. HE Hood with Heavy Loading Filter (HLF) 85
22. Single XP HFR Hoods with Heavy Loading Filter (HLF) and
optional HFR FCC 89
23. Double XP HFR Hoods with Heavy Loading Filter (HLF) and optional HFR FCC 93
24. Hard Hat 97
25. ChinStrap 101
26. Decontamination / Cleaning 103
27. General System Maintenance and Storage 104
28. Battery Use, Maintenance and Storage 106
28.1 Routine Infection Control use in med/surg and ED areas 106
28.2 Emergency Preparedness (EP) and In-Frequent Use 106
28.3 General Use, Maintenance, and Storage 107
28.3.1 Recommended Temperature Ranges 107
28.3.2 Use/Discharge 108
28.3.3 Charge 108
28.3.4 Store 108
28.3.5 Handling and Transport 108
28.3.6 Useful Life 109
28.3.7 LIB Check Procedure - MAXAIR LIB Test for Diminishing Battery Capacity 109
28.3.8 Reference Information 110
28.3.9 Charging Protection from Electrical Surges 110
28.3.10 Projected LIB Level Available As A % At Initial Manufacture Versus
Temperature 111
28.3.11 Glossary 111
29. Disposal 112

Page 6 P/N 03521015 Rev Q
30. Accessories and Alternate and Replacement Parts 113
31. Specications 120

Page 7 P/N 03521015 Rev Q
1.1 Important Information
The words WARNING, CAUTION, and NOTE have special meanings and should be reviewed.
WARNING The personal safety of the user may be involved. Disregarding this information could result in injury to the
user.
CAUTION These instructions point out special procedures or precautions and must be followed. Disregarding this
information could result in jeopardizing the product reliability.
NOTE Provide special information that supplements and/ or claries important instructions.
A triangle with an exclamation point alerts the intended user to place extra emphasis on reading and
understanding the accompanying instructions for operating, maintenance and safety information.
Warnings and Cautions
WARNING
This User’s Instructions and Instructions for Use, that accompany each package of system components,
including the Warnings, Cautions and Special or Critical User’s Instructions, must be read thoroughly and
followed carefully by all persons who have, or will have, the responsibility for using the system. The system
will perform as designed only if it is used and maintained per the User’s Instructions. Failure to follow the
User’s Instructions may be hazardous to the user’s health.
NIOSH Cautions and Limitations
A Not for use in atmospheres containing less than 19.5% oxygen, or more than 25% oxygen.
B Not for use in atmospheres immediately dangerous to life or health.
C Do not exceed maximum use concentrations established by regulatory standards.
F Do not use powered air-purifying respirators if airow is less than 4 CFM (115 LPM) for tight tting face
pieces or 6 CFM (170 LPM) for hoods and/or helmets.
I Contains electrical parts that may cause an ignition in a ammable or explosive atmosphere.
J Failure to properly use and maintain this product could result in injury or death.
L Follow the manufacturer’s instructions for changing cartridges, canisters and/or lters.
M All approved respirators shall be selected, tted, used, and maintained in accordance with MSHA, OSHA,
and other applicable regulations.
N Never substitute, modify, add, or omit parts. Use only exact replacement parts in the conguration as
specied by the manufacturer.
O Refer to User’s Instructions, and/or maintenance manuals for information on use and maintenance of these
respirators.
P NIOSH does not evaluate respirators for use as surgical masks.
S Special or Critical user’s instructions and specic use limitations apply. Refer to User’s Instructions before
donning.
1. Warnings, Cautions, Notes, Symbols

Page 8 P/N 03521015 Rev Q
1.2 S- Special or Critical User’s Instructions
WARNING
Special or Critical User’s Instructions
● NIOSH approved HE lters can be used for protection against particulate aerosols containing oil. However,
Bio-Medical Devices Intl does not recommend use of MAXAIR Systems in oily atmospheres unless
specically indicated on the product.
● Do not use near ame or other heat source.
● The use of MAXAIR Systems in an alarm condition is only for immediate exit to a safe environment.
● During high energy work (exertion) rates, it is possible to over-breathe the MAXAIR System and create a
negative pressure situation.
● If air ow is cut o󰀨, immediately hold your breath and immediately exit to clean air.
● In the power-o󰀨 state, little or no respiratory protection is to be expected. Attempted use in this manner is an
abnormal situation.
● In the powered-o󰀨 state, rapid buildup of carbon dioxide and depletion of oxygen within the DLC system may
occur.
● Materials of HFR Hoods are tested per ASTM F1671 and AATCC 127 to provide an indication of uid
resistance. NIOSH does not conduct this testing as part of their approval.
CAUTION
• When subjected to harsh use in critical environments (e.g. holding and dropping a battery by the power
cord) the helmet-battery power cord will wear at a much faster rate than normal. In these types of
circumstances, the power cord should be examined prior to each use, and it is recommended to be changed
out every 30 days, or sooner if it becomes damaged or degraded.
• Do not operate in environments with temperatures exceeding 54°C
• A suitable environment is when an employee can work a full shift comfortably without any special paraphernalia
other than normal clothing.
• Replace damaged or worn Filters immediately.
• Always start with a fully charged battery.
• Charge Li-Ion Battery in a MAXAIR Lithium-Ion battery charger only.
• The Helmet Power Cord should not be removed from its connection to the Helmet unless the Power Cord
needs replacement.
• Do not immerse system components in liquid.
• Never use compressed air to clean any part of the MAXAIR System.
• There are no user-serviceable parts inside the Helmet and Li-Ion Battery. Do not attempt to disassemble,
open or service the Helmet and Li-Ion Battery. Call Customer Service,
1-800-443-3842, for assistance.

Page 9 P/N 03521015 Rev Q
1.3 SYMBOLS – General and Packaging
1European market“CE” and notied body
number “0194”. 18 Serial Number
2National Institute for Occupational Safety
and Health. 19 Part Number
3
Refer to approval label and User’s instructions
for cautions, limitations, and approved assembly
congurations.
20 Batch Code
4High Eciency. 21 Quantity
5Use by 22 Order Number
6Fluid Resistance 23 Authorized representative in the European
community.
7Consult instructions for use (IFU) 24 Indoor Use Only
8Consult User Instructional Manual (UIM) of
MAXAIR System 25 Type L and Type R Listing Marks for Canada and the United States
9Do Not use in environments requiring
intrinsic safety 26 UL Recognized Component Marks for
Canada and the United States.
10 Place of Manufacture 27 European EMC testing to EN60601-1
11 Date of Manufacture 28 Caution, risk of electrical shock. High
Voltage.
12 Storage Kept Dry. Keep away from rain. 29 Double insulation
13 Storage Humidity Upper limitation. 30 Recyclable.
14 Storage Temperature limitation. 31 Caution, Warning
15 Battery: Operational Upper limit of temperature. 32
British Standard: Respiratory protective
devices- Powered ltering devices
incorporating a helmet or a hood.
16
Per Directive 2002/96/EC, product must be
collected separately. Do not dispose of as
unsorted municipal waste. Contact local
distributor for disposal information.
33 Charging
17
Per Directive 2006/66/EC, collect and recycle
batteries/ battery packs according to EU Member
State regulations.
34 Charge Complete.

Page 10 P/N 03521015 Rev Q
NIOSH (Contents within magenta background): MAXAIR Systems provide HE- High E󰀩ciency Particulate Air Filtering per
NIOSH 42 CFR 84.
● “HE" and "NIOSH" are specic terminology for Filter Protection Classications per NIOSH VFR.
● Purple label background color is specic to NIOSH Filter color coding requirement per ANSI Z88.7-2001.
CE (Contents outside of magenta background): The user should not confuse the markings on a lter relating to any standard
other than EN 12941 with the classication of this device when used with the corresponding lter.
● MAXAIR Systems meet CE TH2 Class design requirements.
● "EN12942, TH2P R S, CE0194" is specic terminology for Filter Protection Classication per
EN 12941:1998 + A2 : 2008.
● White label background is specic to CE Filter color coding requirements per EN 12941:1998 + A2 : 2008.
NOTE
Artwork Shown is for Reference Only.
CAUTION
The purchaser/user is responsible for determining the appropriateness of the CAPR System for each/any of
their particular applications/environments.
2.1 Marking Denitions
2. Regulatory Marking Denitions
Filter markings and colors contain shared and unique information respective to the NIOSH and CE regulatory bodies.

Page 11 P/N 03521015 Rev Q
3.1 Part Numbers Reference
Order Numbers (O.N.) are used throughout the User’s Instructions; NIOSH P/Ns are shown enclosed in parantheses. Table 1
lists the Order Numbers and respective NIOSH Part Numbers for each component.
Table 1. Part Number Reference Chart
DESCRIPTION ORDER NUMBER
(O.N.)
NIOSH NUMBER
HELMETS
CAPR (turnlock w/Cage, Liner, and Power Cord) 2081-03 03531001 Blower Assy.
03531021 Liner
01031269 Cage
2590-05 Power Cord
CAPR (turnlock w/Cage, ChinBar Liner, and Power
Cord)
2082-03 03531001 Blower Assy.
03531104 ChinBar Liner
01031269 Cage
2590-05 Power Cord
CAPR (turnlock w/Cage, Hard Hat Liner, and Power
Cord)
2083-03 03531001 Blower Assy.
03531148 Liner
01031269 Cage
2590-05 Power Cord
POWER CORDS
POWER CORD (Turnlock) 2590-05 2590-05
LINERS
LINER (Standard) 2071-01 03531021
LINER (ChinBar) 2071-02 03531104
LINER (Hard Hat) 2071-03 03531148
COVERS
FCC (Filter Cover Cap) 2061-08 01031284
HFR FCC (High Fluid Resistance Filter Cover Cap) 2061-05 01021609
HARD HAT 2061-04A 01031528
CAGE 2051-07 01031269
FILTERS
FILTER CARTRIDGE (XP) 2163-10 01031279
FILTER CARTRIDGE (HE) 2164-10 01031327
POST FILTER CARTRIDGE 2165-10 01031254
FILTER CARTRIDGE (XP) 2167-10 01031569
FILTER CARTRIDGE (XP N-OV) 2166-10 01031593
FILTER (HLF) 2170-26 07831040
FILTER (HLF) 2170-27 07831205
LENSES
LENS (ANSI Z87) 2400-090L 03521128
CUFFS
DLC LENS-CUFF (ML) 2365-02ML 01031291
DLC LENS-CUFF (SM) 2365-02SM 01031316
DLC LENS CUFF (HARD HAT ML) 2366-02ML 01031555
DLC LENS CUFF (HARD HAT SM) 2366-02SM 01031556
QUICK CUFF 2367-02 07631022
3. Introduction

Page 12 P/N 03521015 Rev Q
Table 1. Part Number Reference Chart - continued
DESCRIPTION ORDER NUMBER
(O.N.)
NIOSH
NUMBER
SHROUDS
DLC-SHROUD (ML) 2260-05ML 01031434
DLC-SHROUD (SM), FINAL PACK. 2260-05SM 01031435
DLC-DOUBLE SHROUD 2261-01ML 01031396
DLC-DOUBLE SHROUD 2261-01SM 01031394
DLC-SHROUD, HARD HAT ASSY. 2264-01ML 01031565
DLC-SHROUD, HARD HAT ASSY. 2264-01SM 01031562
HOODS
HE DLC HOOD WITH FILTER 2270-01ML 01031425
HE DLC HOOD WITH FILTER 2270-01SM 01031417
XP DLC HOOD WITH FILTER 2270-03ML 01031521
XP DLC HOOD WITH FILTER 2270-03SM 01031513
HE DLC HOOD WITH FILTER 2270-04ML 07831037
HE DLC HOOD WITH FILTER 2270-04SM 07831036
HE DLC HOOD WITH FILTER 2270-06ML 07831039
HE DLC HOOD WITH FILTER 2270-06SM 07831038
XP HFR DLC-SINGLE HOOD WITH FILTER 2271PW-07ML 07831184
XP HFR DLC-SINGLE HOOD WITH FILTER 2271PW-07SM 07831183
XP HFR DLC-SINGLE HOOD WITH FILTER 2271PB-07ML 07831156
XP HFR DLC-SINGLE HOOD WITH FILTER 2271PB-07SM 07831155
XP HFR DLC-DOUBLE HOOD WITH FILTER 2272PW-07ML 07831201
XP HFR DLC-DOUBLE HOOD WITH FILTER 2272PW-07SM 07831025
XP HFR DLC-DOUBLE HOOD WITH FILTER 2272PW-07ML 07831202
XP HFR DLC-DOUBLE HOOD WITH FILTER 2272PW-07SM 07831173
BATTERIES
LITHIUM ION BATTERY 2500-30TSC 01532116
LITHIUM ION BATTERY 2500-36TSC 01532104
LITHIUM ION BATTERY 2500-37TSC 01532161
BELT
BATTERY BELT 2000-76 2000-76
CHARGERS
SINGLE CHARGER 2600-01 01432089
6-GANG CHARGER 2601-06 N/A
6 GANG CHARGER BRACKET 2601-06B N/A

Page 13 P/N 03521015 Rev Q
Refer to the regulatory approval inserts shipped with your systems, and the following NIOSH website addresses for MAXAIR
CAPR regulatory approval status.
http://www2a.cdc.gov/drds/cel/cel_results.asp?startrecord=1&Search=cel_form&maxrecords=50&manufacturer=BMD&appdatefrom=&appdate
to=&powered=&scbatype=&scbause=&privatelabel=
http://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/PAPRtables.html
Table 2. summarizes current components that may be used to congure systems relative to the applicable Approval Body.
CUFF AND SHROUD CONFIGURATIONS
ITEM
NUMBER DESCRIPTION
CARTRIDGE FILTER
NIOSH CE
2164-10
HE
(01031327)
2163-10
XP
(01031279)
2167-10
XP
(01031569)
2166-10
XP
(01031593)
2081-03
(P/Ns
03531001,
03531021,
01031269,
2590-05)
Helmet with Cage w/o Cage w/o Cage w/o Cage  
2083-03
(P/Ns
03531001,
03531148,
01031269,
2590-05)
Helmet with Cage and HH Liner w/o Cage w/o Cage w/o Cage 
2071-01
(03531021) Helmet Liner (Standard)     
2071-03
(03531148) Helmet Liner (Hard Hat)  
2061-08
(01031284) Filter Cover Cap (FCC)     
2061-04A
(01031528) Hard Hat  
2400-090L
(03521128) Impact Lens  
2365-02ML
(01031272) DLC Lens-Cu󰀨, Medium-Large     
2365-02SM
(01031316) DLC Lens-Cu󰀨, Small     
2366-02ML
(01031555) DLC Lens-Cu󰀨, Medium-Large, HH  
2366-02SM
(01031556) DLC Lens-Cu󰀨, Small, HH  
3.2 Approved System Conguration Components
Table 2. Approved System Components
BATTERY CHOICE(S)
PER
FILTER CHOICE
(01532104)
2500-
36TSC 36TSC  
(01532161) 37TSC 37TSC 
(01532116) 30TSC 30TSC 30TSC 30TSC  

Page 14 P/N 03521015 Rev Q
3.2 Approved System Conguration Components - cont’d
CUFF AND SHROUD CONFIGURATIONS - cont’d
ITEM
NUMBER DESCRIPTION
CARTRIDGE FILTER
NIOSH CE
2164-10
HE
(01031327)
2163-10
XP
(01031279)
2167-10
XP
(01031569)
2166-10
XP
(01031593)
2260-05ML
(01031434) DLC Shroud, Medium-Large   
2260-05SM
(01031435) DLC Shroud, Small   
2264-01ML
(01031565) DLC Shroud, Medium-Large, HH  
2264-01SM
(01031562) DLC Shroud, Small, HH  
2261-01ML
(01031396) DLC Double Shroud, Medium-Large   
2261-01SM
(01031394) DLC Double Shroud, Small   
Table 2. Approved System Components cont’d
BATTERY CHOICE(S)
PER
FILTER CHOICE
(01532104)
2500-
36TSC 36TSC  
(01532161) 37TSC 37TSC 
(01532116) 30TSC 30TSC 30TSC 30TSC  
HOOD CONFIGURATIONS
ITEM
NUMBER
DESCRIPTION BATTERY NIOSH
2500-36TSC
(01532104)
2500-37TSC
(01532161)
2500-30TSC
(01532116)
2081-03
(P/Ns 03531001,
03531021,
01031269,
2590-05)
Helmet with Cage    
2071-01
(03531021)
Helmet Liner (Standard)    
2061-05
(01021609)
HFR FCC   
2271PW-07ML
(07831184)
2170-27
(07831205)
XP HFR Single Hood with Filter
HLF Filter
   
2271PW-07SM
(07831183)
2170-27
(07831205)
XP HFR Single Hood with Filter
HLF Filter
   
2271PB-07ML
(07831156)
2170-27
(07831205)
XP HFR Single Hood with Filter
HLF Filter
   
2271PB-07SM
(07831155)
2170-27
(07831205)
XP HFR Single Hood with Filter
HLF Filter
   

Page 15 P/N 03521015 Rev Q
HOOD CONFIGURATIONS - cont’d
ITEM
NUMBER
DESCRIPTION BATTERY NIOSH
2500-36TSC
(01532104)
2500-37TSC
(01532161)
2500-30TSC
(01532116)
2081-03
(P/Ns 03531001,
03531021,
01031269,
2590-05)
Helmet with Cage    
2071-01
(03531021)
Helmet Liner (Standard)    
2061-05
(01021609)
HFR FCC   
2272PW-07ML
(07831201)
2170-27
(07831205)
XP HFR Double Hood
HLF Filter
   
2272PW-07SM
(07831025)
2170-27
(07831205)
XP HFR Double Hood
HLF Filter
   
2272PB-07ML
(07831202)
2170-27
(07831205)
XP HFR Double Hood
HLF Filter
   
2272PB-07SM
(07831173)
2170-27
(07831205)
XP HFR Double Hood
HLF Filter
   
2270-01ML
(01031425)
HE Hood with Filter   
2270-01SM
(01031417)
HE Hood with Filter   
2270-03ML
(01031521)
XP Hood with Filter  
2270-03SM
(01031513)
XP Hood with Filter  
2270-04ML
(07831037)
HE Hood with Filter   
2270-04SM
(07831036)
HE Hood with Filter   
ITEM
NUMBER
DESCRIPTION BATTERY NIOSH
2500-36TSC
(01532104)
2500-37TSC
(01532161)
2500-30TSC
(01532116)
2082-03
(P/Ns 03531001,
03531104,
01031269,
2590-05)
Helmet with Cage and ChinBar
Liner
   
2270-06ML
(07831039)
HE Hood with Filter   
2270-06SM
(07831038)
HE Hood with Filter   

Page 16 P/N 03521015 Rev Q
*The CE Marking a󰀩xed to the devices, indicates compliance with the following European
Community Directives:
●Directive 89/686/EEC – Personal Protective Equipment (PPE)
●Directive 93/42/EEC – Medical Device
This PPE has been EC-type examined by the following notied body:
INSPEC International Ltd
56 Leslie Hough Way
Salford
Great Manchester
M6 6AJ
Number 0194
NOTE
2000-76 Battery Belt
2600-01
(01432089) Single Charger
NOTE
The Battery Belt and Single Charger are approved for use with all items that are indicated in Table 2.
NOTE
Use of Gang Charger and Bracket do not require NIOSH approval or CE Mark and are appropriate for use with all
System Congurations.
2601-06 6-Gang Charger, w/6 2600-01 Chargers
2601-06B 6-Gang Charger Bracket, for 2600-01 Chargers

Page 17 P/N 03521015 Rev Q
ITEM O.N. NIOSH P/N DESCRIPTION
CA-CAPR-36
1 2081-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-36TSC 01532104 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
CA-CAPR-37
1 2081-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-37TSC 01532161 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
CA-CAPR-30
1 2081-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-30TSC 01532116 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
Systems are congured from four main components, a Helmet, a Battery, a Battery Belt, and a Battery Charger.
● One Belt and one Charger are common to all systems.
● Three Battery choices are available, including -
■ 2500-36TSC - typically 8-10 hours/charge
■ 2500-37TSC - typically 12-15 hours/charge
■ 2500-30TSC - typically 16-20 hours/charge
● Three Helmet Assembly choices are available, including -
■ 2081-03 - the standard CAPR Helmet Assembly for general Cu󰀨, Shroud, and Hood Congurations.
■ 2082-03 - for congurations utilizing the Quick Cu󰀨.
■ 2083-03 - for congurations utilizing the 2061-04A Hard Hat.
The choice of Helmet and Battery determine which Head/Face Covers are available to a specic System
3.3 CAPR Systems
3.3.1 Systems and System Components
Table 3. SYSTEMS and their COMPONENTS

Page 18 P/N 03521015 Rev Q
ITEM O.N. NIOSH P/N DESCRIPTION
HH-CAPR-37
1 2083-03
03531001 Blower Assembly
03531148 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-37TSC 01532161 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
HH-CAPR-30
1 2083-03
03531001 Blower Assembly
03531148 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-30TSC 01532116 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
Table 3. SYSTEMS and their COMPONENTS cont’d
ITEM O.N. NIOSH P/N DESCRIPTION
CC-CAPR-36
1 2082-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-36TSC 01532104 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
CC-CAPR-30
1 2082-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-30TSC 01532116 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger

Page 19 P/N 03521015 Rev Q
3.3.2 Systems Conguration Possibilities (Trees)

Page 20 P/N 03521015 Rev Q