MaxiiNet VI3010 User manual

Cat-5 Cat-5
VoIP
Application Diagram
Vi3010
The Smart Choice for Transmission Solutions www.vigitron.com
The Vi3010 is the next generation L2+ managed switch designed for PoE+ and high Bandwidth network applications. It provides a reliable
infrastructure for your business network. The Vi3010 delivers unique intelligent features that are needed to improve the availability of your
critical business applications with unique PoE monitoring and application features. The Vi3010 can be programmed to apply PoE
individually timed to each port to lower the potential for power overload that can result in damage. Total power and PoE are monitored for
over power conditions. Programmable IP and PoE connection reduces connection failure potentials and will automatically re-establish
connections and apply PoE, reducing down time and field service calls. It can easily support any Ethernet device such as IP Phones, IP
Cameras, and Wireless base stations; thus helping you to create a more efficient, better networked workforce. Full CLI documentation is
provided for custom integration.
Vigitron Vi3010 is designed to meet the growing power and bandwidth requirements for IP security cameras by providing both reliability
and conductivity with the ability to locate and determine network system problems:
• High PoE Power Budget: Total 250W power supply with 185W PoE budget providing 8-ports at full 15.4W (802.3af) and
6-ports at full 30W (802.3at).
• Programmable Video/Data packet transmission up to the Jumbo Frame limit of 9600 bytes for transmitting the highest mega
pixel cameras at 100Mbps and 1Gps port speeds.
• Wide 20Gbps switch fabric assuring all required bandwidth, even with all ports at their maximum bandwidth assuring video and
data quality.
• Automatic connection and re-connection with PoE application for more reliable startups reducing down time potentials.
• Programmable multicasting for compatibility and performance with largest IP video network systems.
• Programmable Rapid Spanning Tree for redundant network configuration assuring maintenance of network communication
using multiple paths.
• Virtual Stacking features eliminate the need for all switches to be at the same location, while providing access to all switches
anywhere on the network using one IP address.
• Automatic MAC address detection for connected devices for easy connection verification and security programming.
• Easy port feature provides one step port settings for IP camera, VoIP and wireless connections.
MaxiiNet Gigabit Ethernet L2 Plus Managed PoE Switch
TM
Features
• All 10 Ethernet ports are 1Gbps - 8 PoE and 2 SFP ports
• 8 ports at 802.3af PoE and up to 6-ports at 802.3at (30W)
• SNMP for communicating error messaging to local computers
• Automatic IP and PoE connection and reconnection
• Automatic MAC identication for all connected devices
• Individual IP Source Guard for protecting ports
• Supports Jumbo Frames up to 9600 bytes
• High Bandwidth 20Gbyte switching fabric
• Virtual Network Switch Stacking
•Lifetime Warranty
RoHS
IP Camera
Up to 3,000 ft. (914m) Cat-5
Vi3010
IP Camera
IP Camera
Up to 5,000 ft./1,515 m Coax
Cat-5
Vi2401
Vi2401
Cat-5
Vi2301 Vi2301
Network Switches
© Copyright 2014 Vigitron, Inc.

© Copyright 2014 Vigitron, Inc.
Technical Specifications
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Electrical
Ethernet Interface RJ-45 10/100Mbps/ 1Gbps port
Throughput 95.232Mbps
Power 100-240 VAC 50~60 Hz, internal, universal
Status LEDs Power, traffic, link, and PoE
Switch Capacity 35.712 MPPS, 20 Gbps
Ports Total System Ports: 10, 1Gbps
RJ-45 Ports: 10 GbE
RJ-45/SFP(100/1G) Combo: 2
PoE Compatibility IEEE 802.3af, IEEE 802.3at
Supports per port PoE configuration function
Supports per port PoE scheduling
to turn on/off the PoE
Jumbo Frame Support Yes
Mac Table Up to 8K MAC addresses
Regulatory
FCC Part 15, Class A
Safety CE, UL, cUL
Environmental WEEE/RoHS
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: 32° to 104° F; 0° to 40° C
Storage: -4° to 158° F; -20° to 70°C
Operating Humidity 10% to 90%, relative, noncondensing
Mechanical
Dimensions 44mm x 208mm x 166mm;
1.75” x 8.2” x 6.5” (HxWxL)
Weight 2.97lbs / 1.35kg
Material Extruded Aluminum
Accessories
• Switch
• Power Cord
• Mounting Kit
• Console Cable
• CD-ROM includes: Operations Manual, CLI Document,
Quick Install Guide, and Quick Set-Up Guide
Minimum Requirements
• Web browser: Mozilla Firefox version 2.5 or later, Microsoft
Internet Explorer version 6 or later
• Category 5 Ethernet network cable
• TCP/IP, network adapter, and network operating system
(such as Microsoft Windows or Linux) installed on each
computer in network.
Vi3010 8 port - 10/100/1000Base -T +
2 Combo RJ-45/SFP PoE L2 Plus
Managed Switch
Ordering Information
Part No. Description
IEEE 802,3
IEEE 802.3u
IEEE 802.3ab
IEEE802.3z
IEEE 802.3af
IEEE 802.3at
IEEE 802.3x
IEEE 802.1q
IEEE 802.1p
IEEE 802.1x
IEEE 802.1d
IEEE 802.1w
IEEE 802.1s
IEEE 802.1ad
IEEE 802.1AB
IEEE 802.3az
IEEE 802.3ad
IEEE 802.1Q
ANSI/IEEE 802.3
Compatiable ANSI/IEEE
Standards
Product Compatiable IEEE/ANSI Standard
Ethernet 10baseT UTP
Fast Ethernet 1000baseTX UTP
Ethernet 1000baseTX UTP
Ethernet 1000baseX
Power over Ethernet
Power over Ethernet; Type 1 and Type 2
Flow control Capability
VLAN
Class of Service
Access Control
Spanning Tree
Rapid Spanning Tree
Multiple Spanning Tree
Link Aggregation Control Protocol (LACP)
Link Layer Discovery Protocol (LLDP)
Energy Efficient Ethernet Task
Trunking
Tag Based VLAN
Auto – negotiation
Vi3010

Spanning Tree Standard Spanning Tree 802.1d
Protocol (STP) Rapid Spanning Tree (RSTP) 802.1w
Multiple Spanning Tree (MSTP) 802.1s
Trunking Link Aggregation Control Protocol (LACP) IEEE 802.3ad
● Up to 13 groups
● Up to 16 ports per group
VLAN Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
● Port-based VLAN
● 802.1Q tag-based VLAN
● MAC-based VLAN
● Management VLAN
● Private VLAN Edge (PVE)
Easy Port Voice or IP video is automatically assigned to specific VLANS with appropriates levels of QoS.
Generic VLAN Protocol for automatically propagating and configuring VLANs in a bridged domain.
Registration
(GVRP)
DHCP Relay Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82.
(Layer 2)
IGMP v1/v2/v3 IGMP limits bandwidth-intensive multicast traffic to only the requesters.
Snooping
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router.
IGMP Proxy Supports IGMP Proxy
MLD v1/v2 Delivers IPv6 multicast packets only to the required receivers.
Snooping
© Copyright 2014 Vigitron, Inc.
Technical Specifications
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Layer 2 Plus
Secure Shell SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported.
(SSH)
Secure Sockets SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch.
Layer (SSL)
IEEE 802.1X IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and
single/multiple sessions.
Supports IGMP-RADIUS based 802.1X
Dynamic VLAN assignment
Layer 2 isolation PVE (also knows as protected ports) provides L2 isolation between clients in the same VLAN.
Private VLAN Supports multiple uplinks.
Edge (PVE)
Port Security Locks MAC Addresses to ports and limits the number of learned MAC addresses.
IP Source Guard Prevents datagram with spoofed addresses from being in the network.
Radius/ Tacacs+ Supports RADIUS and TACACS+ authentication. Switch as a client.
Storm control Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port.
ACLs Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services
code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control
Message Protocol (ICMP) packets, IGMP packets, TCP flag. Supports up to 256 entries.
Security

Hardware Supports 8 hardware queues.
Priority Queue
Scheduling Strict priority and weighted round-robin (WRR). Queue assignment based on DSCP and class of service (802.1p/ CoS).
Classification Port based; 802.1p VLAN priority based; IPv4/IPv6 precedence/ type of service (ToS) / DSCP based; Differentiated Services
(DiffServ); classification and re-marking ACLs, trusted QoS.
Rate Limiting Ingress policer; egress shaping and rate control; per VLAN, per port and flow based.
IPv6/IPv4 Web/ SSL, Telnet/ SSH, Png, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS,
Applications Syslog, DNS Client, Protocol-based VLANs.
© Copyright 2014 Vigitron, Inc.
Technical Specifications
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Quality of Service
Web GUI Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs).
Interface Supports configuration, system dashboard, maintenance, and monitoring.
Dual Image Dual image provides independent primary and secondary OS files for backup while upgrading.
SNMP SNMP version1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM).
(RMON) Remote Embedded RMON software agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events)
Monitoring for enhanced traffic management, monitoring and analysis.
IPv4 and IPv6 Coexistence of both protocol stacks to migration.
dual stack
Firmware
• Web browser upgrade (HTTP/ HTTPs) and TFTP.
Upgrade
• Upgrade through console port as well.
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1
(N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported.
Easy Port Easily to configure of clients’ QoS and security capabilities.
Configuration
Other Single IP Management; HTTP/HTTPs; SSH; RADIUS; DHCP Client/ DHCPv6 Client; SNTP; Cable Diagnostics; Ping;
Syslog; Telnet Client (SSH secure support).
s-Flow The industry standard technology for monitoring high speed switched networks. It gives complete visibility into the use of
networks enabling performance optimization, accounting/billing for usage, and defense against security threats.
UPnP The Universal Plug-and-Play Forum, an industry group of companies working to enable device-to-device interoperability by
promoting Universal Plug-and-Play.
Management
Link Compliant with IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on Gigabit Ethernet RJ-45
Detection port when detecting if the link is down or if the client is idle. Active mode is resumed without loss of any packets when the
switch detects the link up.
Green Ethernet
Link Layer Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network,
Discovery principally wired Ethernet.
Protocol (LLDP)
Discovery

© Copyright 2014Vigitron, Inc.
Notes
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Benefits
The Vi3010 provides security, performance, quality of services, central management, and other network control capabilities. Optimized and
customized design, and affordable pricing, it best fit for SMB or entry-level enterprise solution. It provides:
• Excellent performance and reliability: The Vi3010 passed the rigorously testing to deliver excellent performance. As a
managed switching solution, it also provides the flexibility to manage and prioritize suitable-bandwidth traffic and PoE for IP Cameras and
Voice.
• Easy, simple deployment and configuration: The device manager software provides an intuitive, web-based interface to
simplify deployment, advanced security (ACLs, IP Source guard, VLAN…etc), and quality of service (QoS) traffic prioritization. This switch
uses IEEE802.1AB LLDP to automatically discover all the devices (those support LLDP) connected to the network. For more advanced
capabilities and easy-to-use graphical tools, such as EPC (Easy-Port-Configuration), it provides preset options for easily configuring each
port of the switch. It will make setup easy when operating with IP phones, IP cameras or Wifi APs.
• Strong security: The switch provides an advanced security and gives you tight control to safeguard the network from unauthorized
users. Advanced security features include:
• Secure remote management by supporting SSH, SSL, and SNMPv3 connection which encrypt the packet content at
each session.
• Extensive access control lists (ACLs) to restrict sensitive portions of the network from unauthorized users or guests.
• Guest virtual LANs (VLANs) provide Internet connectivity to guests while isolating critical traffic from guest traffic.
• IP Source Guard to prevent datagrams with spoofed addresses from being in the network.
• IEEE802.1X port security to tightly limit access to specific segments of network.
• Video and Voice support: The switch can be easily configured with the specific VLAN and QoS parameters to prioritize IP
Cameras and voice traffic whereas ensure consistent network performance for all services.
• Advanced network management capabilities: As a managed switch, it helps you to use a variety of advanced managing
features to manage traffic over your network. Features include:
• Support IPv6: As the IP network addressing scheme evolves to accommodate more devices, Vi3010 supports IPv6, the newest
version of the Internet Protocol, as well as the previous IPv4 standard. As the result, you have the ability to move up to the next
generation of networking applications without an extensive equipment upgrade.
• Remote management: Using Simple Network Management Protocol (SNMP) and IEEE802.1AB LLDP, you can configure and
manage Vi3010 and other Vigitron switches in the network remotely, instead of having to directly connect to them.
• Energy efficiency: Vi3010 is designed to comply with IEEE802.3az, energy efficient Ethernet protocol, reducing energy costs
without compromising performance. Power-saving features include:
• The latest application-specific integrated circuits (ASICs), using low-power technology, allow for lower power consumption and
thinner, more efficient designs.
• Embedded intelligence to adjust signal strength based on cable length.
• Expansion ports: All 10 Ethernet ports on the Vi3010 are 1Gbps. It also offers a RJ-45/SFP combo. 8 ports provide PoE and 2
100/1G SFP ports for uplinks to Fast Ethernet or Gigabit Ethernet fiber optic networks.
Disclaimer
No liability is assumed for any misprint or technical change in this document. Pricing and specifications are subject to change without
notice. All brand names and trademarks are registered property of Vigitron.
© Vigitron Inc. All rights reserved