Maxim Integrated icron Ranger 2311 User manual

USB 2.0 Ranger® 2 311
Before you get started, ensure that all the drivers
required for your USB device(s) are installed.
LEX REX
1Place the units where desired, and connect the
CAT 5e/6/7 (solid core) extension link cabling into
the Link ports (RJ45) of the Local Extender (LEX)
and the Remote Extender (REX).
2Connect the power adapter into your desired unit –
LEX or REX.
Max 100m
(CAT 5e/6/7 cable not included)
3Connect the LEX into your computer using the
included USB 2.0 cable.
Computer
4Attach your USB device to the REX.
Plug the power adapter into
either the LEX or REX unit
Quick
Start
Guide
Product Contents:
▪USB 2.0 Ranger 2311 LEX
▪USB 2.0 Ranger 2311 REX
▪USB 2.0 Cable
▪AC Power Adapter
▪Country Specic Power Cord
▪Quick Start Guide
Refer to the complete user guide online at:
www.icron.com/2311
For technical support visit:
www.icron.com/support
www.icron.com

FCC Radio Frequency Interference Statement Warning
This device complies with FCC Part 15 Subpart B.
CE Statement
We,Icron Technologies Corporation,declare under our sole responsibility that the USB 2.0 Ranger®2311 to which this declaration relates, is in conformity with European
Standard EN 55022 Class A, EN 61000 and EN 55024.
IC Statement
This Class A digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).Implementation of WEEE
regulations may vary slightly by individual EU member states. Please check with your local and state government guidelines for safe disposal and recycling or contact
your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing as this may cause dam-
age and will void warranty. Use only the power supply provided with this product.When not in use,product should be stored in a dry location between -20°C and 70°C.
Detailed product user guides are available online at www.icron.com.
Limited Hardware Warranty
Icron warrants that any hardware products accompanying this documentation shall be free from significant defects in material and workmanship for a period of two
years from the date of purchase. Icron’s hardware warranty extends to Licensee,its customers and end users.
The warranty does not include repair of failures caused by: misuse, neglect, accident, modification, operation outside a normal operating environment, service of the
device by non-authorized servicers, or a product for which Icron is not responsible.
Hardware Remedies
Icron’s entire liability and the Licensee’s exclusive remedy for any breach of warranty, shall be,at Icron’s option, either: (a) return of the price paid, or (b) repair or
replacement of hardware,which will be warranted for the remainder of the original warranty period or 30 days,whichever is longer.These remedies are void if failure of
the hardware has resulted from accident, abuse or misapplication.
Limitation of Liability
The hardware warranty set forth in this agreement replaces all other warranties.Icron expressly disclaims all other merchantability and fitness for a particular purpose
and non-infringement of third-party rights with respect to the hardware.
Icron dealer, agent, or employee is not authorized to make any modification, extension or addition to this warranty. Under no circumstances will Icron, its suppliers or
licensors be liable for any costs of procurement or substitute products or services, lost profits,loss of information or data, or any other special, indirect, consequential or
incidental damages arising in any way out of the sale of, use of,or inability to use Icron product or service, even if Icron,its suppliers or licensors have been advised of the
possibility of such damages. In no case shall Icron, its suppliers and licensors’liability exceed the actual money paid for the products at issue.
Since some jurisdictions do not allow the limitation of implied warranties of liability for incidental,consequential,special, or indirect damages, the above limitation may
not always apply.The above limitations will not apply in case of personal injury where and to the extent that applicable law requires such liability.
Certification, Compliance and Warranty Information
Copyright © 2019 Icron | A Maxim Integrated Brand.
All rights reserved.Icron Technologies Corporation,
the Icron Technologies Corporation logo and
products referred to herein are either the trademarks
or the registered trademarks of Icron Technologies
Corporation.All other trademarks are property of their
respective owners.Icron Technologies Corporation
assumes no responsibility for errors that may appear in
this document. Information contained herein is subject
to change without notice. 90-01391-A04
Warranty/RMA Inquiries: www.icron.com/support www.icron.com
Obtaining Warranty Service
To obtain warranty service,you must contact Icron within the warranty period for a Return
Material Authorization (RMA) number. Icron will not accept returns without an authorized
RMA number. Be sure to include the serial numbers of the LEX unit and REX unit in any of your
email correspondence.Package the product appropriately for safe shipment and mark the RMA
number on the outside of the package.The package must be sent prepaid to Icron Technologies
Corporation.We recommend that you insure or send it by a method that provides package
tracking.The repaired or replaced item will be shipped to you, at Icron’s expense, not later than
thirty days after Icron receives the defective product.
Address to return product: Icron Technologies Corporation
Att: RMA Coordinator
4664 Lougheed Hwy., Suite 221
Burnaby, BC V5C 5T5 Canada