MaxLux МХ0048 User manual

 
maxluxitalia.com | [phone] � U
  
MX 00 4 8
4x4 HDMI Seamless Matrix Switcher
INTRODUCTION
MX0048 è un sistema matriciale di elaborazione video HDMI ad alta velocità che può essere facilmente configurato e
controllato per varie applicazioni in tre differenti modalità di uscita (Matrice, Dual e Video Wall).
Nel modo Matrice il funzionamento è quello tipico di una normale matrice. Nel Dual mode, 2 ingressi vengono visualizzati
in modo POP su una uscita con la particolarità che 2 uscite visualizzano lo stesso segnale. Esse sono per default la 1-2 e
la 3-4. Il Video wall, come è intuibile, visualizza una sola delle 4 sorgenti allargata sui 4 monitor di uscita (effetto "splice").
La matrice supporta l'intera gamma di risoluzioni video fino a WUXGA o 1080p e formati audio differenti fino a 7.1CH
LPCM a 192 kHz frequenza di campionamento.
Può essere gestita tramite i pulsanti del pannello anteriore, controllo IR, RS-232, Telnet, o GUI. Un'applicazione software
è altrettanto fornita.
FEATURES
•HDMI, HDCP1.1 and DVI compliant
•Deep color support 8/10/12 bit source
• Seamless switching
•Supports four different modes: Matrix mode/ Dual mode/ Quad /
TV Wall mode
■ Matrix mode: Can routes and output any 4 source to any 4 dis-
plays with seamless switching
Note: Under output timing 1080i@50/60 input 4 will be disabled,
OSD will show “IN 4 Disabled”
■ Dual mode: Can display POP (Picture Of Picture) & PiP (Picture
In Picture) image com-bined by 2 sources to be presented on
the HDMI output ports (Dual A and Dual B)
■Quad mode: Can output all sources to a display (4 in 1) as a full
image.
■TV Wall mode: Can output any source to 4 displays (2 by 2
Video wall) as a full image with adjustable Bezel Correction for 4
displays
•Supports OSD, RS232, Telnet, WebGUI, Remote control and on-pan-
el controls
•Input resolutions support VGA~WUXGA and 480i~1080p
•Output resolutions support 480p~1080p
• Supports different input resolution and output resolution selectable
from OSD menu. The factory default value for the output resolution
is 720p@60Hz/ 2CH LPCM
•Audio supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/
Dolby TruHD & DTS-HD

 
 |   
  
MX 00 4 8
OPERATION CONTROLS AND FUNCTIONS
Front Panel
POWER - +
1
INPUT 234AVESRECALL
A
OUTPUT BCD
4X4 SEAMLESS MATRIX CDPS-44SM
LOCK
MA
DUAL/W
TRIX/
ALL
XGA
720P
MENU
1 2 3 4 5 8 9
6 7
1IR Window:
Accept IR signal from the device’s remote control included in the
package.
2Power
ON/OFF: Press this button to power on the device or set it to
standby mode.
Factory default: Press Power then connect power supply to
reset the system to Factory default setting.
3MENU:
Press this button to bring up the OSD menu on screen.
Press “MENU” with “-“button to switch output timing to 720P@60Hz
instantly.
Press “MENU” with “+” button to switch output timing to XGA
(1024x768@60Hz) instantly.
4-/+ Buttons:
Press these buttons to scroll down/up the OSD selections then press
“MENU” button to conrm.
5CHANNEL INPUT 1~4 and CHANNEL OUTPUT A~D:
Matrix mode: To display any of the four sources on to andy of
the four displays.
i. Press “Matrix/Dual/TV Wall” button to switch to Matrix mode
and LED will illuminate constantly.
ii. Press an output from A~D and then press corresponding input
from 1~4. For example: press output A then press input 1,
output A will display input 1’s image. Each output setting must

 
maxluxitalia.com | [phone] �  U 
  
MX 00 4 8
Rear Panel
3444 CD AB CONTROL RS232 DC 12V
USB
SERVICE
ONLY
HDMI IN HDMI OUT
1 2 3 4 5 6
1HDMI IN 1~4:
Connect with HDMI source equipments such as DVD/Blue-ray play-
ers and or PC/Notebook devices.
2HDMI OUT 1~4:
Connect with HDMI TV/Monitor/Recorder for output image display
or saving.
3Control:
Connect to an active network for telnet control (Please refer to 6.5
telnet Commands).
4USB SERVICE ONLY:
This slot is reserved for factory use only.
5RS-232:
Connect from PC/Notebook with D-Sub 15pin cables for RS-232
command sending and controling over the device.
6DC 12V:
Plug the 12V DC power supply into the unit and connect the
adaptor to an AC outlet.

CONNECTION DIAGRAM
AB
CD
ABAB
CDCD
A
ABAB
CDCD
4443 DCBACONTROL RS232 DC 12V
SEUS RVB IC
ONLY E
HDMI IN HDMI OUT
Set-top Box HDMI Video signal
HDMI
Cable
TV/Display TV/Display
HDMI
Cable HDMI Cable HDMI Cable
HDMI
Cable
HDMI
Cable
RJ45
Cable
D-Sub 9pin
Cable
PC
SPECIFICATION
Video Bandwidth
Input port
Output port
Power Supply
ESD Protection
Dimensions (mm)
Weight(g)
Chassis Material
Silkscreen Color
225MHz/6.75Gbps
4x HDMI (Female type)
1xUSB (Service only)
4 x HDMI (Female type)
12V/3A DC (US/EU standards, CE/FCC/UL
certied)
Human body model:
±8 kV (air-gap discharge)
±4kV (contact discharge)
436(W) x 247(D) x 44(H)
2200
Aluminum
Black
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
-20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
20 ~ 90% RH (non-condensing)
15w